A goal of chemical reaction dynamics is to control the course of reactions. We are examining the photodissocation of HOD, which is attractive for coherent control studies. A fixed frequency laser at 600 nm and its third harmonic at 200 nm is used to simultaneously and coherently photodissociate the rovibrationally excited parent molecules. Preliminary experiments focussed on confirming individual steps of the complex experiment; results are given of three-photon dissociation of H{sub 2}O, which gives confidence for the HOD three-photon dissociation.

Computer vision and force control provide feedback for robot manipulation during the assembly of objects. Both techniques have weaknesses, but their complementary strengths enable them to work well together, achieving assembly with tight tolerances. For instance, camera resolution limits the accuracy of computer vision, but it can locate approximately where the part should be placed and is an excellent choice for coarse placement of the part. Force control senses the force induced by object contact and if used extensively could damage a delicate part, but when used for fine placement of an object, it compensates for the error in coarse placement. It is our goal to utilize the best features of force sensing and computer vision to reduce the error in placement of an object. The results of placing a peg in a 0.15mm tolerance hole with different camera resolutions will be presented. We have chosen to use computer vision to move the peg as close to its correct placement point as possible and force control to make minor adjustments, achieving the correct positioning of the peg.

The technique of laser-induced ablation of thin films from glass slide substrates has been investigated as a candidate vapor target production method for studies of both tunneling-driven x-ray/xuv recombination lasers and relativistic propagation using intense, ultra-short laser pulses. It is shown by simultaneous two-wavelength interferometry that particle densities of order 10{sup 19}/cm{sup 3} are readily achieved and that some intrinsic ionization accompanies the plume formation. Absorption measurements with both 100 picosecond and 125 femtosecond pulses are consistent with observed edge velocities near 10{sup 6} cm/sec. The level of ionization driven by the intense 125 femtosecond laser pulse has been coarsely estimated. Averaged estimates from spectral blue shifting of spectra transmitted through the plume are consistently lower than those obtained from evaluation of saturation intensity thresholds based on the sequential nonresonant optical field ionization (OFI) process.

This paper addresses a new value engineering approach successfully being used at the Idaho National Engineering Laboratory (INEL) in the design process of major construction projects. Of particular interest is how value engineers are applying the principles of Total Quality Management (TQM), utilizing value engineering techniques. Discussed are the associated problems with how major construction projects were previously planned, designed, value engineered, and then redesigned. Benefits of applying value engineering techniques early-on in the design process, far ahead of the traditional time for VE execution, is examined. The author provides a pro-con analysis of the benefits of early-on value engineering effort, and uses data gathered from several value engineering studies to support the conclusions of this paper.

The Mercury KrF laser facility at Los Alamos is being built with the benefit of lessons learned from the Aurora system. An increased understanding of KrF laser engineering, and the designed implementation of system flexibility, will permit Mercury to serve as a tested for a variety of advanced KrF technology concepts.

The Mercury KrF laser facility at Los Alamos is being built with the benefit of lessons learned from the Aurora system. An increased understanding of KrF laser engineering, and the designed implementation of system flexibility, will permit Mercury to serve as a tested for a variety of advanced KrF technology concepts.

A laser flash photolysis kinetic study of a W(CO){sub 5} intermediate reacting with several different substituted 2,2{prime}-bipyridine ligands at pressures up to 150 MPa in liquid toluene has confirmed the considerable influence of steric hindrance on the mechanism of a thermal ring closure reaction. A similar laser flash photolysis kinetic study has been carried out with Mo(CO){sub 6} and several bidentate ligands resembling 2,2{prime}-bipyridine dissolved in supercritical carbon dioxide. A much larger negative activation volume is found in supercritical carbon dioxide than observed previously with this solute system dissolved in liquid toluene. Rate of replacement of one polydentate ligand by another stronger chelating agent in the first coordination sphere of aqueous gadolinium(III) ion was measured over a range of pressures and other variables using a stopped-flow spectrophotometer. Two consecutive first order reaction steps are observed that show acid-catalysis.

The authors have measured the ion yields for helium and neon ionized by 120 femtosecond, 614 nanometer laser pulses with intensities up to 10{sup 16} watts per square centimeter. They have found that the He II and Ne II data exhibit features incompatible with standard nonresonant sequential ionization. These features reduce the usefulness of optical field ionization for monitoring laser intensity. For the experiment, they expect dynamic resonances to have little effect on the ionization, and they attribute the features to nonsequential ionization based on the simultaneous saturation of the features and the singly ionized charge states.

The authors analyze the consequences of models of structure formation for higher-order (n-point) galaxy correlation functions in the mildly non-linear regime. Several variations of the standard {Omega} = 1 cold dark matter model with scale-invariant primordial perturbations have recently been introduced to obtain more power on large scales, R{sub p} {approximately}20 h{sup {minus}1} Mpc, e.g., low-matter-density (non-zero cosmological constant) models, {open_quote}tilted{close_quote} primordial spectra, and scenarios with a mixture of cold and hot dark matter. They also include models with an effective scale-dependent bias, such as the cooperative galaxy formation scenario of Bower, et al. The authors show that higher-order (n-point) galaxy correlation functions can provide a useful test of such models and can discriminate between models with true large-scale power in the density field and those where the galaxy power arises from scale-dependent bias: a bias with rapid scale-dependence leads to a dramatic decrease of the hierarchical amplitudes Q{sub J} at large scales, r {approx_gt} R{sub p}. Current observational constraints on the three-point amplitudes Q{sub 3} and S{sub 3} can place limits on the bias parameter(s) and appear to disfavor, but not yet rule out, the hypothesis that scale-dependent bias is responsible for the extra power observed on large scales.

The authors analyze the consequences of models of structure formation for higher-order (n-point) galaxy correlation functions in the mildly non-linear regime. Several variations of the standard [Omega] = 1 cold dark matter model with scale-invariant primordial perturbations have recently been introduced to obtain more power on large scales, R[sub p] [approximately]20 h[sup [minus]1] Mpc, e.g., low-matter-density (non-zero cosmological constant) models, [open quote]tilted[close quote] primordial spectra, and scenarios with a mixture of cold and hot dark matter. They also include models with an effective scale-dependent bias, such as the cooperative galaxy formation scenario of Bower, et al. The authors show that higher-order (n-point) galaxy correlation functions can provide a useful test of such models and can discriminate between models with true large-scale power in the density field and those where the galaxy power arises from scale-dependent bias: a bias with rapid scale-dependence leads to a dramatic decrease of the hierarchical amplitudes Q[sub J] at large scales, r [approx gt] R[sub p]. Current observational constraints on the three-point amplitudes Q[sub 3] and S[sub 3] can place limits on the bias parameter(s) and appear to disfavor, but not yet rule out, the hypothesis that scale-dependent bias is responsible for the extra power observed …

Radiative corrections to the parameters of the standard electroweak model are considered in case that there is no light Higgs particle.

Radiative corrections to the parameters of the standard electroweak model are considered in case that there is no light Higgs particle.

None

The objectives of this project are to study the effect of pretreatment methods on the two-stage liquefaction process. In particular, the effects of dispersed catalysts and carbon monoxide atmospheres on a coal liquefaction process. The project is divided into three technical tasks. Task 1 involves the analyses of the liquefaction products derived from liquefaction experiments using the catalysts Fe(CO){sub 5} and the sulfated iron catalyst, Fe{sub 2}O{sub 3}{center_dot}SO{sub 4}. We also analyzed the products derived from treating the recycle vehicle under coal liquefaction conditions with no coal or catalyst present, and found that the toluene and THF fractions had low H/C ratios. No CO or CO{sub 2} gases were detected after reaction, although considerable amount of methane gas was produced, suggesting that during the liquefaction runs the carbon oxides are produced only from the coal, as expected, but that methane gas is produced both from the recycle solvent and the coal. We now have more information about the recycle solvent from Wilsonville, who report that the residue was 63%, composed of 45% resid and 18% insoluble inorganic (CI), and a distilable portion of 37% (1050{degrees}F). During this quarter we compared coal conversions using Fe(CO){sub 5} with CO and H{sub 2}/CO …

If two features of the inertial fusion process are exploited successfully, they can lead to significantly lower costs for demonstrating the feasibility of commercial electric power production from this source of energy. First, fusion capsule ignition and burn physics is independent of reaction chamber size and hydrodynamically-equivalent capsules can be designed to perform at small yield, exactly as they do at large yield. This means that an integrated test of all power plant components and feasibility tests of various reaction chamber concepts can be done at much smaller sizes (about 1--2 m first wall radius) and much lower powers (tens of MWs) than magnetic fusion development facilities such as ITER. Second, the driver, which is the most expensive component of currently conceived IFE development facilities, can be used to support more than one experiment target chamber/reactor (simultaneously and/or sequentially). These two factors lead to lower development facility costs, modular facilities, and the planning flexibility to spread costs over time or do several things in parallel and thus shorten the total time needed for development of Inertial Fusion Energy (IFE). In this paper the authors describe the general feature of a heavy ion fusion development plan that takes advantage of upgradable …

The Savannah River Site (SRS) is a Department of Energy (DOE) facility located near Aiken, South Carolina which is currently operated and managed by Westinghouse Savannah River Company (WSRC). The Sanitary Landfill (Sanitary Landfill) at the SRS is located approximately 2,000 feet Northwest of Upper Three Runs Creek (UTRC) on an approximately 70 acre site located south of Road C between the SRS B-Area and UTRC. The Sanitary Landfill has been receiving wastes since 1974 and operates as an unlined trench and fill operation. The original landfill site was 32 acres. This area reached its capacity around 1987 and a Northern Expansion of 16 acres and a Southern Expansion of 22 acres were added in 1987. The Northern Expansion has not been used for waste disposal to date and the Southern Expansion is expected to reach capacity in 1992 or 1993. The waste received at the Sanitary Landfill is predominantly paper, plastics, rubber, wood, metal, cardboard, rags saturated with degreasing solvents, pesticide bags, empty cans, and asbestos in bags. The landfill is not supposed to receive any radioactive wastes. However, tritium has been detected in the groundwater at the site. Gross alpha and gross beta are also evaluated at the …

Using first-principles electronic structure calculations based on the Linear-Muffin-Tin Orbital (LMTO) method, we have investigated the effects of interstitial born and hydrogen on the electronic structure of the Ll{sub 2} ordered intermetallic Ni{sub 3}Al. When it occupies an octahedral interstitial site entirely coordinated by six Ni atoms, we find that boron enhances the charge distribution found in the strongly-bound ``pure`` Ni{sub 3}Al crystal: Charge is depleted at Ni and Al region. Substitution Al atoms for two of the Ni atoms coordinating the boron, however, reduces the interstitial charge density between atomic planes. In contrast to boron, hydrogen appears to deplete the interstitial charge, even when fully coordinated by Ni atoms. We suggest that these results are broadly consistent with the notion of boron as a cohesion enhancer and hydrogen as an embrittler.

The purpose of the present program is to develop soluble analogs of surface confined catalysts that can be impregnated directly into the coal structure at low temperatures. This approach should avoid problems related to surface area dependence, a two phase (surface-liquid) reaction system and, mass transport limitations. Heteropolyanions (HPAs) offer the opportunity to develop soluble forms of surface confined catalysts. HPAs, are inexpensive, well-characterized, water soluble metal oxide clusters, e.g. [EM {sub 12}O{sub 40}]{sup 14{minus}} where E = Si or P and M = Mo or W. They are easily modified to contain other transition metals such as Co, Ni or Ru and, can be made soluble in organic solvents. The protic forms exhibit extremely high acidities pK{sub a} {approx} 0--2. In addition, selectively modified RPAs can function as low temperature hydrogenation catalysts that exhibit microporosity HPAs are multifunctional catalysts that could be used to promote both hydroliquefaction and hydrotreating. In theory, these functions could be employed sequentially or simultaneously and could permit exceptional control of liquefaction reactions and reaction conditions. Thus, the current research program involves efforts to evaluate HPAs as soluble liquefaction and hydrotreating catalysts, with the goal of developing soluble analogs of surface confined catalysts. Alternately, if …

For {mu}LCR with slow polarization transfer, the weak resonance signals can be strengthened by delaying the positron observation period, for pulsed and chopped muon beams. Furthermore, the sensitivity to drifts can be reduced or eliminated by using the ratios of late to early e{sup +} counts. These possibilities for using time information are discussed quantitatively.

In Part I, Surface Chemistry of Coal Pyrite the mechanisms responsible for the inefficient rejection of coal pyrite were investigated using a number of experimental techniques. The test results demonstrate that the hydrophobicity of coal pyrite is related to the surface products formed during oxidation in aqueous solutions. During oxidation, a sulfur-rich surface layer is produced in near neutral pH solutions. This surface layer is composed mainly of sulfur species in the form of an iron-polysulfide along with a smaller amount of iron oxide/hydroxides. The floatability coal pyrite increases dramatically in the presence of frothers and hydrocarbon collectors. These reagents are believed to absorb on the weakly hydrophobic pyrite surfaces as a result of hydrophobic interaction forces. In Part III, Developing the Best Possible Rejection Schemes, a number of pyrite depressants were evaluated in column and conventional flotation tests. These included manganese (Mn) metal, chelating agents quinone and diethylenetriamine (DETA), and several commercially-available organic depressants. Of these, the additives which serve as reducing agents were found to be most effective. Reducing agents were used to prevent pyrite oxidation and/or remove oxidation products present on previously oxidized surfaces. These data show that Mn is a significantly stronger depressant for pyrite than …

This report surveys U.S. automobile policy in the 1980s in order to clarify the effects of foreign lobbying. The conclusion is that the success of Japanese and other foreign lobbying on automobile policy has been mixed. Some decisions have gone their way; others have not. Their success is partly because they have aligned their efforts with those of powerful domestic interests.

The United States Department of Energy, Morgantown Energy Research Center (DOE/METC), is sponsoring the development of direct coal-fired turbine power plants as part of their Heat Engines program. A major technical challenge remaining for the development of the direct coal-fired turbine is high-temperature combustion gas cleaning to meet environmental standards for sulfur oxides and particulate emissions, as well as to provide acceptable turbine life. The Westinghouse Electric Corporation, Science & Technology Center, is evaluating two Integrated Low Emissions Cleanup (ILEC) concepts that have been configured to meet this technical challenge: A baseline ceramic barrier filter ILEC concept, and a fluidized bed ILEC concept. These ILEC concepts simultaneously control sulfur, particulate, and alkali contaminants in the high-pressure combustion gases at turbine inlet temperatures up to 2300{degrees}F. This document reports the status of a program in the nineteenth quarter to develop this ILEC technology for direct coal-fired turbine power plants.

This report presents field results and raw data from the Buried Waste Integrated Demonstration (BWID) Arc Melter Vitrification Project Phase 1 baseline test series conducted by the Idaho National Engineering Laboratory (INEL) in cooperation with the U.S. Bureau of Mines (USBM). The baseline test series was conducted using the electric arc melter facility at the USBM Albany Research Center in Albany, Oregon. Five different surrogate waste feed mixtures were tested that simulated thermally-oxidized, buried, TRU-contaminated, mixed wastes and soils present at the INEL. The USBM Arc Furnace Integrated Waste Processing Test Facility includes a continuous feed system, the arc melting furnace, an offgas control system, and utilities. The melter is a sealed, 3-phase alternating current (ac) furnace approximately 2 m high and 1.3 m wide. The furnace has a capacity of 1 metric ton of steel and can process as much as 1,500 lb/h of soil-type waste materials. The surrogate feed materials included five mixtures designed to simulate incinerated TRU-contaminated buried waste materials mixed with INEL soil. Process samples, melter system operations data and offgas composition data were obtained during the baseline tests to evaluate the melter performance and meet test objectives. Samples and data gathered during this program included …

This report presents field results and raw data from the Buried Waste Integrated Demonstration (BWID) Arc Melter Vitrification Project Phase 1 baseline test series conducted by the Idaho National Engineering Laboratory (INEL) in cooperation with the U.S. Bureau of Mines (USBM). The baseline test series was conducted using the electric arc melter facility at the USBM Albany Research Center in Albany, Oregon. Five different surrogate waste feed mixtures were tested that simulated thermally-oxidized, buried, TRU-contaminated, mixed wastes and soils present at the INEL. The USBM Arc Furnace Integrated Waste Processing Test Facility includes a continuous feed system, the arc melting furnace, an offgas control system, and utilities. The melter is a sealed, 3-phase alternating current (ac) furnace approximately 2 m high and 1.3 m wide. The furnace has a capacity of 1 metric ton of steel and can process as much as 1,500 lb/h of soil-type waste materials. The surrogate feed materials included five mixtures designed to simulate incinerated TRU-contaminated buried waste materials mixed with INEL soil. Process samples, melter system operations data and offgas composition data were obtained during the baseline tests to evaluate the melter performance and meet test objectives. Samples and data gathered during this program included …