Use of ``LDS Moldable`` as a cushion material for future DWPF melters is deemed feasible, because it serves the purpose of reducing the stress in the steel shell to acceptable levels. The assessment is based on the design geometry of the DWPF melter currently undergoing testing.

The pyrolysis of methane in the absence of a quench was studied at temperatures between 900 and 1050{degrees}C and methane flows of 80--200 Scc/min. At 1050{degrees}C and a methane flow rate of 100 Scc/minute, methane conversion ranged between 15--19% with the major products being benzene, acetylene, and ethylene. The benzene molar selectivity was ca. 50%, corresponding to molar yield of ca. 7.5--10%. The reaction resulted in the formation of visible amounts of solid carbon, particularly at 1050{degrees}C. The resulting solid consisted partly of carbon and partly of a yellowish tar-like material which was soluble in toluene and contained various heavy hydrocarbons and polyring aromatics.

At the request of the former Secretary, an inspection of six classified intelligence and special access program work-for-others projects was conducted. The purpose of this inspection was to evaluate managements, effectiveness regarding these work-for-others projects and included tests for financial integrity and adherence to applicable laws and regulations. Details of the inspection are provided in this report.

KM, Knob Manager, is a tool which enables the user to use the SUNDIALS knob box to adjust the settings of the control system. The followings are some features of KM: dynamic knob assignments with the user friendly interface; user-defined gain for individual knob; graphical displays for operating range and status of each process variable is assigned; backup and restore one or multiple process variable; save current settings to a file and recall the settings from that file in future.

Effect of low-NO{sub x} firing. There was no clear-cut effect on the emission of trace metals or acid gases. The data give marginal evidence for a decreased emission of Cr(VI), which would be a favorable change but is not certain by any means. The effect on aldehydes and ketones cannot be stated because of the loss of samples for baseline conditions; no credible data on these compounds were obtained for baseline conditions. The change in volatile organics appeared to be a reduction in emissions, whereas that for semi-volatiles seemed to be an increase. Inasmuch as low-NO{sub x} firing is sometimes accompanied by large increases in the amount of unburned carbon in the ash, the result for semi-volatiles is more in line with expectation. Effect of the hot-side ESP. As indicated above, the hot-side ESP lowered trace-element emissions to the range roughly from 1 to 5% of the levels found in the inlet gas stream. Not surprisingly, the hot-side ESP had no measurable influence on the emissions of SO{sub x}, HF, and HCl. Quite surprisingly, on the other hand, the ESP seemed to suppress the emission of certain organic substances. Suppression of the emission of formaldehyde is particularly difficult to explain. …

The primary objectives of this task are to characterize the sludge, to identify any unexpected processing problems, and to demonstrate the ability to make an acceptable glass product. Another objective is to determine the amount of washing that the sludge from Tank 42 requires. The 500 ml glass Sludge Receipt and Adjustment Tank (SRAT) and the 100 L stainless steel SRAT have already been used in the Shielded Cells to demonstrate the process using samples from other tanks. The melter and off-gas system have also been used in the Shielded Cells to vitrify sludge from Tanks 8 & 12 and from Tank 51.

This procedure provides the operations approach, a field sampling plan, and laboratory procedures for a soil washing test to be conducted by Alternative Remedial Technologies, Inc. (ART) in the 300-FF-1 area at the Hanford site. The {open_quotes}Quality Assurance Project Plan for the Soil Washing Physical Separations Test, 300-FF-1 Operable Unit,{close_quotes} Hanford, Washington, Alternative Remedial Technologies, Inc., February 1994 (QAPP) is provided in a separate document that presents the procedural and organizational guidelines for this test. This document describes specifications, responsibilities, and general procedures to be followed to conduct physical separation soil treatability tests in the North Process Pond of the 300-FF-1 Operable Unit (OU) at the Hanford Site. These procedures are based on the {open_quotes}300-FF-1 Physical Separations CERCLA Treatability Test Plan, DOE/RL 92-2l,{close_quotes} (DOE-RL 1993).

This document supplements and extends the Functional Design Criteria, SP-W026-FDC-001, for the Waste Receiving and Processing Facility (WRAP), Module 1. It provides additional detailed requirements, summarizes key Westinghouse Hanford Company design guidance, and establishes baseline technical agreements to be used in definitive design of the WRAP-1 facility. Revision 3 of the Supplemental Design Requirements Document has been assigned an Impact Level of 3ESQ based on the content of the entire revision. The actual changes made from Revision 2 have an Impact Level of 3S and the basis for these changes was previously reviewed and approved per WHC correspondence No. 9355770.

Weekly newsletter discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

The largest source of uncertainty in the retrieval of SST (sea-surface) temperature from space-borne infrared radiometric measurements is in the correction for the effects of the intervening atmosphere. During a research cruise of the R/V Alliance measurements of sea surface temperature, surface meteorological variables and surface infrared radiances were taken. SST fields were generated from the ATSR data using pre-launch algorithims derived by the ATSR Instrument Team (A.M. Zavody, personal communication), and the initial comparison between ATSR measurements and SST taken along the ship`s track indicate that the dual-angle atmospheric correction is accurate in mid-latitude conditions.