Since its beginning, the Atmospheric Release Advisory Capability (ARAC), an emergency radiological dose assessment service of the US Government, has been called on to do consequence assessments for releases into the atmosphere of radionuclides and a variety of other substances. Some of the more noteworthy emergency responses have been for the Three Mile Island and Chernobyl nuclear power reactor accidents, and more recently, for a cloud of gases from a rail-car spill into the Sacramento river of the herbicide metam sodium, smoke from hundreds of burning oil wells in Kuwait, and ash clouds from the eruption of Mt. Pinatubo. The spatial scales of these responses range from local, to regional, to global, and the response periods from hours, to weeks, to months. Because of the variety of requirements of each unique assessment, ARAC has developed and maintains a flexible system of people, computer software and hardware.

The Atmospheric Release Advisory Capability (ARAC) at the Lawrence Livermore National Laboratory (LLNL) uses a modeling system to calculate the impact of accidental radiological or toxic releases to the atmosphere anywhere in the world. Operated for the US Departments of Energy and Defense, ARAC has responded to over 60 incidents in the past 18 years, and conducts over 100 exercises each year. Explosions are one of the most common mechanisms by which toxic particulates are injected into the atmosphere during accidents. Automated algorithms with default assumptions have been developed to estimate the source geometry and the amount of toxic material aerosolized. The paper examines the sensitivity of ARAC`s dispersion model to the range of input values for explosive sources, and analyzes the model`s accuracy using two field measurement programs.

Fully coupled thermomechanical analysis solves the thermal problem on the deforming geometry and incorporates thermal loads into the mechanical problem. In contrast, traditional thermal stress analysis is based on an uncoupled approach in which the thermal problem is solved on a fixed geometry, and the resulting temperatures are then used to load a mechanical problem. Thermal contact, in which heat flow paths depend on the mechanical deformations of adjacent surfaces, is a major component of many fully coupled thermomechanical analyses. This paper presents the development of a thermomechanical finite element formulation, including contact. The proposed approach accommodates arbitrarily large relative motions of contact surfaces, fully unstructured meshes, pressure-dependent contact resistance, conduction across small gaps, and approximate models for convection and radiation. The theory described herein has been implemented in the Lawrence Livermore National Laboratory public code PALM2D and has been used to solve a diverse set of thermomechanical problems. Examples illustrating the performance of this code on large deformation thermomechanical problems are presented and discussed.

This manual provides the user on how to use the Graphical Database Configuration Tool (GDCT) to build EPICS databases and visualize links between records and process variables.

This report lists 234 instances in which the United States has used its armed forces abroad in situations of conflict or potential conflict or for other than normal peacetime purposes. It brings up to date a 1989 list that was compiled in part from various older lists and is intended primarily to provide a rough sketch survey of past U.S. military ventures abroad. A detailed description and analysis are not undertaken here.

A single crack 30 mm or deeper which is 75 mm long is sufficient to fracture a typical 155 mm cannon barrel with a pressure at or above two-thirds (206 MPa -- 30 ksi) of the maximum operating pressure (310 MPa -- 45 ksi). Longer and deeper flaws reduce the critical pressure required to initiate fracture. For the monolithic barrel design considered in this work, the postulated 30 mm deep by 75 mm long crack should propagate through the entire wall and, depending upon the new ``fractured`` geometry, may propagate axially down the cannon barrel. Numerical analyses conducted with straight through-thickness crack fronts propagated axially at pressures below the maximum operating pressure while those with curved crack fronts required pressures in excess of the working pressures to extend axially. (Experiments on actual 155 mm barrels with flaws similar to the one generated by the tested shape charge show appreciable axial crack extension at approximately equivalent pressures.) In either case, a through-thickness ``hole`` will be formed in the barrel`s side and a reduction in firing pressure should result. Finally, debris deposited within the barrel can greatly assist the fracture process, especially at lower operating pressures. Overall, a single deep and long …

The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase prices, the f.o b. and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Sales data for motor gasoline, distillates residuals, aviation fuels, kerosene, and propane are presented.

The Estimating Services Department of the Fernald Environmental Restoration Management Corporation (FERMCO) is formalizing the process of life-cycle cost analysis (LCCA) for the Fernald Environmental Management Project (FEMP). The LCCA process is based on the concepts, principles, and guidelines described by applicable Department of Energy`s (DOE) orders, pertinent published literature, and the National Bureau of Standards handbook 135. LCC analyses will be performed following a ten-step process on the FEMP at the earliest possible decision point to support the selection of the least-cost alternatives for achieving the FERMCO mission.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification; Whether a member of an appraisal review board may appear before the board either in a capacity as a court-appointed receiver or a registered property tax consultant without violating conflict-of-interest laws and related questions (RQ-507, ID# 18811)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Dan Morales, regarding a legal question submitted for clarification: Removal of criminal record subject to expunction order from agency files (ID# 18550)

Available thermodynamic data for volatilization of U and Pu gaseous species under oxidizing conditions are tabulated: UO{sub 3}, UO{sub 2}(OH){sub 2}, UO{sub 2}F{sub 2}, PuO{sub 3}, PuO{sub 2}(OH){sub 2}. Results of a thermodynamic analysis of U, Pu, and Am volatilities in the secondary combustor, plasma arc process, and vitrifier are given.