Generating and returning imagery from great distances has been generally associated with national security activities, with emphasis on reliability of system operation. (While the introduction of such capabilities was usually characterized by high levels of innovation, the evolution of such systems has followed the classical track of proliferation of ``standardized items`` expressing ever more incremental technological advances.) Recent focusing of interest on the use of remote imaging systems for commercial and scientific purposes can be expected to induce comparatively rapid advances along the axes of efficiency and technological sophistication, respectively. This paper reviews the most basic reasons for expecting the next decade of advances to dwarf the impressive accomplishments of the past ten years. The impact of these advances clearly will be felt in all major areas of large-scale human endeavor, commercial, military and scientific.

Since its beginning, the Atmospheric Release Advisory Capability (ARAC), an emergency radiological dose assessment service of the US Government, has been called on to do consequence assessments for releases into the atmosphere of radionuclides and a variety of other substances. Some of the more noteworthy emergency responses have been for the Three Mile Island and Chernobyl nuclear power reactor accidents, and more recently, for a cloud of gases from a rail-car spill into the Sacramento river of the herbicide metam sodium, smoke from hundreds of burning oil wells in Kuwait, and ash clouds from the eruption of Mt. Pinatubo. The spatial scales of these responses range from local, to regional, to global, and the response periods from hours, to weeks, to months. Because of the variety of requirements of each unique assessment, ARAC has developed and maintains a flexible system of people, computer software and hardware.

The Distributed Queue Dual Bus (DQDB) system consists of a linear arrangement of N nodes that communicate with each other using two contra-flowing buses; the nodes use an extremely simple protocol to send messages on these buses. This simple, but elegant, system has been found to be very challenging to analyze. We consider a simple and uniform abstraction of this model to highlight the fairness issues in terms of average waiting time. We introduce a new approximation method to analyze the performance of DQDB system in terms of the average waiting time of a node expressed as a function of its position. Our approach abstracts the intimate relationship between the load of the system and its fairness characteristics, and explains all basic behavior profiles of DQDB observed in previous simulation. For the uniform DQDB with equal distance between adjacent nodes, we show that the system operates under three basic behavior profiles and a finite number of their combinations that depend on the load of the network. Consequently, the system is not fair at any load in terms of the average waiting times. In the vicinity of a critical load of 1 {minus} 4/N, the uniform network runs into a state …

This report gives a general overview of the EGS[underscore]Windows2 program. The program is intended to be used to display individual particle histories of electrons, photons, and positrons generated by the EGS4 Code System. Much of this work is based on the earlier version of EGS[underscore]Windows2 from the Institute for National Measurement Standards at the National Research Council of Canada (NRCC). No attempt is made to modify their EGS subroutine WATCH, which is used to output the particle vectors to be read by EGS-Windows, or duplicate any of the documentation describing the subroutine. EGS[underscore]Windows2 reads data in the same format as produced by WATCH. Users of EGS[underscore]Windows2 are encouraged to obtain the original EGS[underscore]Windows report from the NRCC in addition to this report as complete documentation of EGS[underscore]Windows2. As in the original report, two levels of information are covered in this report: the user level, and the programmer level. The user level should be read by all users. It describes execution, operation, and capabilities. The programmer level should be read by those users who may want to modify the program or who would like a more detailed understanding. It describes briefly the routines and there function, as well as the major …

This report gives a general overview of the EGS{underscore}Windows2 program. The program is intended to be used to display individual particle histories of electrons, photons, and positrons generated by the EGS4 Code System. Much of this work is based on the earlier version of EGS{underscore}Windows2 from the Institute for National Measurement Standards at the National Research Council of Canada (NRCC). No attempt is made to modify their EGS subroutine WATCH, which is used to output the particle vectors to be read by EGS-Windows, or duplicate any of the documentation describing the subroutine. EGS{underscore}Windows2 reads data in the same format as produced by WATCH. Users of EGS{underscore}Windows2 are encouraged to obtain the original EGS{underscore}Windows report from the NRCC in addition to this report as complete documentation of EGS{underscore}Windows2. As in the original report, two levels of information are covered in this report: the user level, and the programmer level. The user level should be read by all users. It describes execution, operation, and capabilities. The programmer level should be read by those users who may want to modify the program or who would like a more detailed understanding. It describes briefly the routines and there function, as well as the major …

Element-specific magnetic hysteresis measurements on heteromagnetic materials have been achieved by using circularly polarized soft-x- rays. Dramatically different Fe and Co hysteresis curves of Fe/Cu/Co trilayers were obtained by recording the magnetic circular dichroism (MCD) at their respective L{sub 3} white lines as a function of applied magnetic field. The data resolve the complicated hysteresis curves, observed by conventional magnetometry, and determine the individual magnetic moments for the Fe and Co layers. Fine hysteresis features, imperceptible in the conventional curves, were also observed, demonstrating a new application of circularly polarized soft-x-rays in the investigation of magnetic systems.

The Atmospheric Release Advisory Capability (ARAC) at the Lawrence Livermore National Laboratory (LLNL) uses a modeling system to calculate the impact of accidental radiological or toxic releases to the atmosphere anywhere in the world. Operated for the US Departments of Energy and Defense, ARAC has responded to over 60 incidents in the past 18 years, and conducts over 100 exercises each year. Explosions are one of the most common mechanisms by which toxic particulates are injected into the atmosphere during accidents. Automated algorithms with default assumptions have been developed to estimate the source geometry and the amount of toxic material aerosolized. The paper examines the sensitivity of ARAC`s dispersion model to the range of input values for explosive sources, and analyzes the model`s accuracy using two field measurement programs.

Many, if not most, of the world`s commercial nuclear power plants have been the subject of plant-specific probabilistic safety assessments (PSAs). A growing number of other nuclear facilities as well as other types of industrial installations have been the focus of plant-specific PSAs. Such studies have provided valuable information concerning the nature of the fisk of the individual facility and have been utilized to identify opportunities to manage that risk. This paper explores the risk management activities associated with three diverse facilities to demonstrate the versatility of the use of PSA to support risk related decision making. The three facilities considered are a DOE research reactor with an extensive operating history, a proposed DOE research reactor in the advanced conceptual design phase and an offshore unmanned oil and gas installation.

Fully coupled thermomechanical analysis solves the thermal problem on the deforming geometry and incorporates thermal loads into the mechanical problem. In contrast, traditional thermal stress analysis is based on an uncoupled approach in which the thermal problem is solved on a fixed geometry, and the resulting temperatures are then used to load a mechanical problem. Thermal contact, in which heat flow paths depend on the mechanical deformations of adjacent surfaces, is a major component of many fully coupled thermomechanical analyses. This paper presents the development of a thermomechanical finite element formulation, including contact. The proposed approach accommodates arbitrarily large relative motions of contact surfaces, fully unstructured meshes, pressure-dependent contact resistance, conduction across small gaps, and approximate models for convection and radiation. The theory described herein has been implemented in the Lawrence Livermore National Laboratory public code PALM2D and has been used to solve a diverse set of thermomechanical problems. Examples illustrating the performance of this code on large deformation thermomechanical problems are presented and discussed.

Microprobe techniques using scanned, focused MeV ions are routinely used in Livermore for materials characterization. Comprehensive data analysis with these techniques is accomplished with the computer software package IMAP, for Ion Micro-Analysis Package. IMAP consists of a set of command language procedures for data processing and quantitative spectral analysis. Deconvolution of the data is achieved by spawning sub-processes within IMAP which execute analysis codes for each specific microprobe technique. IMAP is structured to rapidly analyze individual spectra or multi-dimensional data blocks which classify individual events by the two scanning dimensions, the energy of the detected radiation and, when necessary, one sample rotation dimension. Several examples are presented to demonstrate the utility of the package.

The Savannah River Technology Center created a second instance of its ORACLE based PEN LIMS to support site Environmental Restoration projects. The first instance of the database had been optimized for R&D support and did not implement rigorous sample tracking, verification, and holding times needed to support regulatory commitments. Much of the R&D instance was transferable such as the work control functions for backlog reports, work assignment sheets, and hazard communication support. A major enhancement of the regulatory LIMS was the addition of features to support a {open_quotes}standardized{close_quotes} electronic data format for environmental data reporting. The electronic format, called {open_quotes}AN92{close_quotes}, was developed by the site environmental monitoring organization and applies to both onsite and offsite environmental analytical contracts. This format incorporates EPA CLP data validation codes as well as details holding time and analytical result reporting requirements. The authors support this format by using special SQL queries to the database. The data is then automatically transferred to the environmental databases for trending and geological mapping.

The uranium-0.8 wt % titanium (U-0.8 Ti) alloy is often used in weapon applications where high strength and fairly good ductility are necessary. Components are immersion quenched in water from the gamma phase to produce a martensitic structure that is amenable to aging. Undesirable conditions occur when a component occasionally cracks during the quenching process, and when tensile specimens fail prematurely during mechanical testing. These two failures prompted an investigative analysis and a series of studies to determine the causes of the cracking and erratic behavior observed in this alloy. Quench-related failures whereby components that cracked either during or immediately after the heat treatment/quenching operation were sectioned for metallographic examination of the microstructure to examine the degree of phase transformation. Examination of premature tensile specimen failures by scanning electron microscopy and x-ray imaging of fracture surfaces revealed pockets of inclusions at the crack origins. In addition, tests were conducted to evaluate the detrimental effects of internal hydrogen on ductility and crack initiation in this allay.

In support of the Lawrence Livermore National Laboratory`s (LLNL`s) Uranium Atomic Vapor Laser Isotope Separation (U-AVLIS) Program, a laser atomic absorption spectroscopy (LAS) system has been developed. This multi-laser system is capable of simultaneously measuring the line densities of {sup 238}U ground and metastable states, {sup 235}U ground and metastable states, iron, and ions at up to nine locations within the separator vessel. Supporting enrichment experiments that last over one hundred hours, this laser spectroscopy system is employed to diagnose and optimize separator system performance, control the electron beam vaporizer and metal feed systems, and provide physics data for the validation of computer models. As a tool for spectroscopic research, vapor plume characterization, vapor deposition monitoring, and vaporizer development, LLNL`s LAS laboratory with its six argon-ion-pumped ring dye lasers and recently added Ti:Sapphire and external-cavity diode-lasers has capabilities far beyond the requirements of its primary mission.

The production of large quantities of spacecraft needed by SDIO will require a cultural change in design and production practices. Low rates production and the need for exceedingly high reliability has driven the industry to custom designed, hand crafted, and exhaustively tested satellites. These factors have mitigated against employing design and manufacturing cost reduction methods commonly used in tactical missile production. Additional challenges to achieving production efficiencies are presented by the SDI spacecraft mission requirement. IR sensor systems, for example, are comprised of subassemblies and components that require the design, manufacture, and maintenance of ultra precision tolerances over challenging operational lifetimes. These IR sensors demand the use of reliable, closed loop, cryogenic refrigerators or active cryocoolers to meet stringent system acquisition and pointing requirements. The authors summarize some spacecraft cryocooler requirements and discuss observations regarding Industry`s current production capabilities of cryocoolers. The results of the Lawrence Livermore National Laboratory (LLNL) Spacecraft Fabrication and Test (SF and T) MODIL`s Phase I producibility demonstration project is presented.

The Center for Accelerator Mass Spectrometry at LLNL has installed a new 64 position AMS sample changer on our spectrometer. This new sample changer has the capability of being controlled manually by an operator or automatically by the AMS data acquisition computer. Automatic control of the sample changer by the data acquisition system is a necessary step towards unattended AMS operation in our laboratory. The sample changer uses a fiber optic shaft encoder for rough rotational indexing of the sample wheel and a series of sequenced pneumatic cylinders for final mechanical indexing of the wheel and insertion and retraction of samples. Transit time from sample to sample varies from 4 s to 19 s, depending on distance moved. Final sample location can be set to within 50 microns on the x and y axis and within 100 microns in the z axis. Changing sample wheels on the new sample changer is also easier and faster than was possible on our previous sample changer and does not require the use of any tools.

About 30 specialists in non-proliferation participated in a workshop to explore ideas for US Government preparatory steps leading to the 1995 Nuclear Non-Proliferation Treaty (NPT) Extension Conference. To that end, workshop sessions were devoted to reviewing the lessons learned from previous Review Conferences, discussing the threats to the non-proliferation regime together with ways of preserving and strengthening it, and examining the management of international nuclear commerce. A fundamental premise shared by workshop participants was that extension of the NPT is immensely important to international security. The importance of stemming proliferation and, more specifically, extending the Treaty, is growing as a result of the significant changes in the world. If the conferees of the Extension Conference decide on no extension or extension for a short limited duration, some technically advanced states that have foregone development of nuclear weapons may begin to rethink their options. Also, other arms control measures, such as the Chemical Weapons Convention, could start to unravel. The US must provide strong international leadership to ensure that the Extension Conference is a success, resulting in Treaty extension, perhaps through successive terms, into the indefinite future. Workshop participants were struck by the urgent need for the US to take organizational …

The Estimating Services Department of the Fernald Environmental Restoration Management Corporation (FERMCO) is formalizing the process of life-cycle cost analysis (LCCA) for the Fernald Environmental Management Project (FEMP). The LCCA process is based on the concepts, principles, and guidelines described by applicable Department of Energy`s (DOE) orders, pertinent published literature, and the National Bureau of Standards handbook 135. LCC analyses will be performed following a ten-step process on the FEMP at the earliest possible decision point to support the selection of the least-cost alternatives for achieving the FERMCO mission.

The Department of Energy`s (DOE) Computerized Accident/Incident Reporting System (CAIRS) is a comprehensive data base containing more than 50,000 investigation reports of injury/illness, property damage and vehicle accident cases representing safety data from 1975 to the present for more than 150 DOE contractor organizations. A special feature is that the text of each accident report is translated using a controlled dictionary and rigid sentence structure called Factor Relationship and Sequence of Events (FRASE) that enhances the ability to retrieve specific types of information and to perform detailed analyses. DOE summary and individual contractor reports are prepared quarterly and annually. In addition, ``Safety Performance Profile`` reports for individual organizations are prepared to provide advance information to appraisal teams, and special topical reports are prepared for areas of concern such as an increase in the number of security injuries or environmental releases. The data base is open to all DOE and Contractor registered users with no access restrictions other than that required by the Privacy Act.

The purpose of this paper is to compare reflection factors for weak shocks from various surfaces, and to focus attention on some unsolved questions. Three different cases are considered: square-wave planar shock reflection from wedges; square-wave planar shock reflection from cylinders; and spherical blast wave reflection from a planar surface. We restrict ourselves to weak shocks. Shocks with a Mach number of M{sub O} < 1.56 in air or with an overpressure of {Delta}{sub PI} < 25 psi (1.66 bar) under normal ambient conditions are called weak.