Newsletter focusing on pecan disease and pest control in Texas, including prevention, identification, treatment, and educational opportunities.

Preparation, characterization, and reactivity of ({eta}{sup 2}- alkyne)(meso-tetratolylpoprphrinato)titanium(II) complexes are described, along with inetermetal oxygen atom transfer reactions involving Ti(IV) and Ti(III) porphyrin complexes. The {eta}{sup 2}- alkyne complexes are prepared by reaction of (TTP)TiCl{sub 2} with LiAlH{sub 4} in presence of alkyne. Structure of (OEP)Ti({eta}{sup 2}-Ph-C{triple_bond}C-Ph) (OEP=octaethylporphryin) was determined by XRD. The compounds undergo simple substitution to displace the alkyne and produce doubly substituted complexes. Structure of (TTP)Ti(4-picoline){sub 2} was also determined by XRD. Reaction of (TTP)Ti{double_bond}O with (OEP)Ti-Cl yields intermetal O/Cl exchange, which is a one-electron redox process mediated by O atom transfer. Also a zero-electron redox process mediated by atom transfer is observed when (TTP)TiCl{sub 2} is reacted with (OEP)Ti{double_bond}O.

(1) After 500 hours of operation in the pressurized fluidized-bed combustion gas environment, the fibrous outer membrane along the clay bonded silicon carbide Schumacher Dia Schumalith candles remained intact. The fibrous outer membrane did not permit penetration of fines through the filter wall. (2) An approximate 10-15% loss of material strength occurred within the intact candle clay bonded silicon carbide matrix after 500 hours of exposure to the PFBC gas environment. A relatively uniform strength change resulted within the intact candles throughout the vessel (i.e., top to bottom plenums), as well as within the various cluster ring positions (i.e., outer versus inner ring candle filters). A somewhat higher loss of material strength, i.e., 25% was detected in fractured candle segments removed from the W-APF ash hopper. (3) Sulfur which is present in the pressurized fluidized-bed combustion gas system induced phase changes along the surface of the binder which coats the silicon carbide grains in the Schumacher Dia Schumalith candle filter matrix.

The detonation of a series of explosives was performed in a controlled manner to collect the resulting, solid residue or {open_quotes}soot.{close_quotes} This residue was examined to determine the ratios of the stable carbon, hydrogen, and nitrogen isotopes. The goal of the experiment was to determine if these ratios could be used to indicate, from the post detonation residues, the type and origin of the detonated explosive. The ratios of the stated stable isotopes in the undetonated explosive were also determined. Despite some reservations in the quality of the data resulting from contamination by nonexplosive components, certain trends can be discerned. (1) Carbon isotopes allow aromatic explosives to be distinguished from nonaromatic explosives. This trend seems to carry through the detonation so that the distinction might be made after the fact. (2) The amination process for TATB can be detected through the hydrogen and, to some extent, the nitrogen isotope ratios. Unfortunately, the data are not sufficiently good to determine if this differential carries through the detonation. (3) The relative magnitude and sign of the nitrogen isotope ratio seems to carry through the detonation: some exchange with atmospheric nitrogen is probable. Even though this set of experiments must also be viewed …

Results are reported in two areas: (1) understanding the mechanism of superplasticity in those that show unusual resistance to intergranular cavitation, and (2) understanding the growth of heteroepitaxial films of oxides by CVD (NiO, TiO{sub 2}).

In the DWPF (Defense Waste Processing Facility), glass forming chemicals will be added to the waste in the form of premelted glass frit. On an oxide weight basis, DWPF glass will consist of approximately 64 wt% glass frit, 8 wt% precipitate hydrolysis aqueous product, and 28 wt% sludge. The glass frit and the precipitate hydrolysis aqueous product together make up what is called the glass-former composition. Current plants are to control the composition of the frit through the procurement specifications and chemical analyses of representative lot samples. The following report was prepared at the end of 1992 and summarizes the evaluation of the second lot sample of DWPF Frit 202 from Cataphote Inc. The frit was received and evaluated for moisture, particle size distribution, organic-inorganic carbon and chemical composition. The moisture content was within specification. The particle size determination indicates that there was a fraction of a percent more coarse frit (+80 mesh) than the specified amount. The fine end of the distribution was within specification. A representative sample was submitted to Corning Engineering Laboratory Services for chemical analyses. The sample was split and two dissolutions prepared. Each dissolution was analyzed on two separate days. The results indicate that there …

Nearly all industrial facilities have been responsible for introducing synthetic chemicals into the environment. The Savannah River Site is no exception. Several areas at the site have been contaminated by chlorinated volatile organic chemicals. Because of the persistence and refractory nature of these contaminants, a complete clean up of the site will take many years. A major focus of the mission of the Environmental Sciences Section of the Savannah River Technology Center is to develop better, faster, and less expensive methods for characterizing, monitoring, and remediating the subsurface. These new methods can then be applied directly at the Savannah River Site and at other contaminated areas in the United States and throughout the world. The Environmental Sciences Section has hosted field testing of many different monitoring technologies over the past two years primarily as a result of the Integrated Demonstration Program sponsored by the Department of Energy`s Office of Technology Development. This paper provides an overview of some of the technologies that have been demonstrated at the site and briefly discusses the applicability of these techniques.

These lecture notes review the LDA-KKR-CPA method for treating the electronic structure and energetics of random alloys and the MF-CF and GPM theories of ordering and phase stability built on the LDA- KKR-CPA description of the disordered phase. Section 2 lays out the basic LDA-KKR-CPA theory of random alloys and some applications. Section 3 reviews the progress made in understanding specific ordering phenomena in binary solid solutions base on the MF-CF and GPM theories of ordering and phase stability. Examples are Fermi surface nesting, band filling, off diagonal randomness, charge transfer, size difference or local strain fluctuations, magnetic effects; in each case, an attempt is made to link the ordering and the underlying electronic structure of the disordered phase. Section 4 reviews calculations of electronic structure of {beta}-phase Ni{sub c}Al{sub 1-c} alloys using a version of the LDA-KKR-CPA codes generalized to complex lattices.

I review the current determinations of {alpha}{sub s}. Attention is given to the theoretical uncertainties inherent in most determinations. all current determinations are consistent with an average of {alpha}{sub s}(M{sub Z}) = 0.119{plus_minus}0.005. Prospects for reduction of the errors in the future are discussed.

A two-dimensional fluid code called UEDGE is used to simulate the edge plasma in tokamak divertors and to evaluate methods for reducing the heat load on divertor plates by radiating some of the power before it reaches the plates. UEDGE is a fully-implicit code being developed jointly by us, D. A. Knoll and R. B. Campbell. For these studies, UEDGE uses a banded matrix solver and a fixed-fraction impurity model. Work is presently underway with Knoll and Campbell to include a memory-efficient iterative solver and a model of impurity transport. Simulations of the proposed TPX device show that a few percent nitrogen concentration in the scrape-off layer can radiate up to 80% of the divertor power, thus reducing the peak heat flux and electron temperature at the divertor plate to acceptable values. A comparison of the neutral gas distribution from UEDGE with results from the DEGAS Monte Carlo neutrals code confirms the validity of our fluid neutrals model.

After a number of refinements, the stability and ease of tuning of the LBL AECR ion source are greatly improved. Several nuclear science experiments have now used cyclotron ion beams injected by the AECR ion source and have taken advantage of its good short and long term-stability and high performance. Refinements include installation of a dc filament power supply for the electron gun, improved gas flow control.and temperature stabilization of parts of the microwave transmission network. Measurements of the mean plasma potential and plasma potential difference were made on the AECR and the LBL ECR sources. The absolute. mean potentials of plasmas of oxygen, argon, and argon mixed with oxygen in the AECR have been determined. These plasma potentials are positive with respect to the plasma wall and are on the order of a few tens of volts for microwave power up to 600 W and normal operating gas flow. Electrons injected by an electron gun into the AECR plasma reduce the plasma potentials. Beam energy spreads of oxygen, argon and argon mixed with oxygen have also been measured. Measurement of the plasma potential difference between the first and the second stage of the LBL ECR ion source shows that …

Using a {sup 137}Cs source we have determined the position of two of the source tubes embedded in the Pb absorber in the cast EMC module used in the Fermilab test beam. Two scintillator tiles placed in the gaps on both sides of an absorber containing a source tube were readout into independent phototubes. The difference in scintillator response was measured in two towers at two different source tube layers. We find the source tube to be displaced towards the (radial) front of the EMC by about 1.6 mm in both measurements. Work is proceeding now to check other source tubes in other locations.

At Lawrence Livermore National Laboratory (LLNL) we have recently developed several techniques for volume visualization of scalar and vector fields, all of which use back-to-front compositing. The first renders volume density clouds by compositing polyhedral volume cells or their faces. The second is a ``splatting`` scheme which composites textures used to reconstruct the scalar or vector fields. One version calculates the necessary texture values in software, and another takes advantage of hardware texture mapping. The next technique renders contour surface polygons using semi-transparent textures, which adjust appropriately when the surfaces deform in a flow, or change topology. The final one renders the ``flow volume`` of smoke or dye tracer swept out by a fluid flowing through a small generating polygon. All of these techniques are applied to a climate model data set, to visualize cloud density and wind velocity.

A vapor-phase, reagent-based, fiber optic trichloroethylene (TCE) sensor developed by Lawrence Livermore National Laboratory (LLNL) was demonstrated at the Savannah River Site (SRS) in two configurations. The first incorporated the sensor into a down-well instrument bounded by two inflatable packers capable of sealing an area for discrete depth analysis. The second involved an integration of the sensor into the probe tip of the Army Corps of Engineers Waterways Experiment Station (WES) cone penetrometry system. Discrete depth measurements of vapor-phase concentrations of TCE in the vadose zone were successfully made using both configurations. These measurements demonstrate the first successful in situ sensing (as opposed to sampling) of TCE at a field site.

This report includes the results of the Human Factors evaluation of the local control stations (LCS) 254 and 255 performed by Savannah River Technology Center (SRTC) Human Factors. Recommendations are included in order that the panel designs will be upgraded to comply with human engineering design guidelines. Figures 1 and 2 are included as examples of recommended changes. Also, consideration was given to including the proposed engineering changes which are currently on-going for LCS 255. Appendix A identifies the human engineering requirements from NUREG-0700 which were used in the evaluation process, and the areas of the design which do not comply with the guidelines. Those areas of the panel design which fail to comply with the human engineering guidelines are label location, label content, location aids, panel layout, and control display integration. Each of these design deficiencies and proposed corrections are described in this report.

Hazardous debris includes objects contaminated with hazardous waste. Examples of debris include tree stumps, timbers, boulders, tanks, piping, crushed drums, personal protective clothing, etc. Most of the hazardous debris encountered comes from Superfund sites and other facility remediation, although generators and treaters of hazardous waste also generate hazardous debris. Major problems associated with disposal of debris includes: Inappropriateness of many waste treatments to debris; Difficulties in obtaining representative samples; Costs associated with applying waste specific treatments to debris; Subtitle C landfill space was being used for many low hazard debris types. These factors brought about the need for debris treatment technologies and regulations that addressed these issues. The goal of such regulation was to provide treatment to destroy or remove the contamination if possible and, if this is achieved, to dispose of the cleaned debris as a nonhazardous waste. EPA has accomplished this goal through promulgation of the Hazardous Debris Rule, August 18, 1992.

This project was initiated, in response to concerns that the observed excess of malignant melanoma among employees of Lawrence Livermore National Laboratory (LLNL) might reflect the incidence of disease diagnostically different than that observed in the general population. LLNL sponsored a slide review project, inviting leading dermatopathology experts to independently evaluate pathology slides from LLNL employees diagnosed with melanoma and those from a matched sample of Bay Area melanoma patients who did not work at the LLNL. The study objectives were to: Identify all 1969--1984 newly diagnosed cases of malignant melanoma among LLNL employees resident in the San Francisco-Oakland Metropolitan Statistical Area, and diagnosed at facilities other than Kaiser Permanente; identify a comparison series of melanoma cases also diagnosed between 1969--1984 in non-Kaiser facilities, and matched as closely as possible to the LLNL case series by gender, race, age at diagnosis, year of diagnosis, and hospital of diagnosis; obtain pathology slides for the identified (LLNL) case and (non-LLNL) comparison patients for review by the LLNL-invited panel of dermatopathology experts; and to compare the pathologic characteristics of the case and comparison melanoma patients, as recorded by the dermatopathology panel.

The SCC radiation field is higher than that encountered by previous hadron collider detectors. In particular, the electromagnetic (EM) calorimeter compartment sees the highest radiation dose. Since an EM calorimeter also makes the most precise energy measurement, special care must be lavished on this part of a calorimeter. Previous studies have concentrated on Monte Carlo examinations of 2 longitudinal compartments within the EM which can alleviate radiation damage. Recently, it was realized that a ``shower maximum`` detector, such as exists in CDF, also contains information of the conversion point of an electromagnetic shower. As such, it can potentially be used in a fashion analogous to the longitudinal compartments, although it is not designed to be optimized for this role.

The program focuses on materials research and development, fabrication process development, cell/stack performance testing and characterization, cost and system analysis, and quality development.

The osteogenic sarcoma is the dominant life-threatening pathology in lifespan studies of beagles exposed to alpha-emitting bone-seeking radionuclides. It was deduced from these studies that certain skeletal sites are more prone to develop tumors. This project sought to determine the bone cells at risk and their cell-specific radiation dose. The cell-specific radiation dose values are related to loss and high Ra-226 and Pu-239 induced osteogenic sarcoma sites, to test different dose response hypothesis and predict the extent of effects in humans.

A project for the US Department of Energy, entitled ``Incorporation of an organic acid representation into MAGIC (Model of Acidification of Groundwater in Catchments) and Testing of the Revised Model UsingIndependent Data Sources`` was initiated by E&S Environmental Chemistry, Inc. in March, 1992. Major components of the project include: improving the MAGIC model by incorporating a rigorous organic acid representation, based on empirical data and geochemical considerations, and testing the revised model using data from paleolimnological hindcasts of preindustrial chemistry for 33 Adirondack Mountain lakes, and the results of whole-catchment artificial acidification projects in Maine and Norway. The ongoing research in this project involves development of an organic acid representation to be incorporated into the MAGIC modeland testing of the improved model using three independent data sources. The research during Year 1 has included conducting two workshops to agree on an approach for the organic acid modeling, developing the organic subroutine and incorporating it into MAGIC (Task 1), conducing MAGIC hindcasts for Adirondack lakes and comparing the results with paleolimnological reconstructions (Task 2), and conducting site visits to the manipulation project sites in Maine and Norway. The purpose of this report is to provide a summary of the work that …

This document is being prepared to document that a No Further Action Decision (NFAD) document is appropriate for the Hg-1 site at Shemya Air Force Base (AFB), Alaska, under the Air Force Installation Restoration Program (IRP). The IRP is a Department of Defense (DOD) program established to identify and remediate hazardous waste problems on DOD property that result from past practices. The Alaska Department of Environmental Conservation (ADEC) draft document {open_quotes}No Further Action Criteria for DOD Military/FUD Sites{close_quotes} has been used as a guide in preparing this document. Air Force personnel have stated that the Hg-1 site may have been used to store mercury and PCB-contaminated material. The site was added to the IRP in 1987, and later that year a field investigation was conducted at the site. Soil samples were collected and analyzed for mercury, EP toxicity, polychlorinated biphenyls (PCBs), and dioxin. All concentrations of contaminants found in Area Hg-1 are below regulatory action levels for PCBs (40 CFR 761) and mercury (55 FR 30798) or below detection levels for dioxin/furans. Therefore, leaving these soils in place is acceptable.

Energy-dependent photoelectron diffraction (EDPD) has been used to determine the surface structure of a surface alloy. Direct imaging has been achieved by Fourier transformation of experimental energy-dependent photoelectron diffraction data. This holographic method, based upon the intersection of contour arcs associated with each measurement direction, can provide vectorial atomic positions with atomic resolution. Experimental analysis is supported by Fourier transformation of simulations from multiple scattering calculations. The surface geometry of c(2x2) Au/Cu(001) has been imaged in an elementally-specific manner, with clear, non-model-dependent discrimination of the surface alloy over the overlayer structure.

Syngas is known to contain approximately 1 percent H{sub 2}S, along with CO{sub 2}, C0{sub 2}, H{sub 2} and CH{sub 4}. Similarly, the syngas may become contaminated with oxygen, particularly during reactor start-up and during maintenance. Previous studies with the water-gas shift bacterium Rhodospirillum rubrum have shown that the bacterium is tolerant of small quantities of oxygen, but the effects of oxygen on CO-consumption are unknown. Similarly, R. rubrum is known to be tolerant of H{sub 2}S, with high concentrations of H{sub 2}S negatively affecting CO-uptake. Batch experiments were thus carried out to determine the effects of H{sub 2}S and O{sub 2} on CO-uptake by R. rubrum. The results of these experiments were quantified by using Monod equations modified by adding terms for CO, H{sub 2}S and O{sub 2} inhibition. The techniques used in determining kinetic expressions previously shown for other gas-phase substrate bacterial systems including R. rubrum were utilized.