Lapping and polishing machines usually do not have deterministic model to pre-determine removal rate and total material to be removed. The removal process is mainly affected by relative motion between the lap and the substrates, by load applied, and by mechano-chemical characteristics of the substrate material, as well as the abrasive and lap materials. Therefore, frequent measurements of the removal is necessary. This paper, written for optical technicians, includes formulas to calculate material removal from mass loss and removal rate from mass loss during operation. Establishing the removal rate helps by reducing the frequency of intermediate thickness measurements. The paper also includes the calculation of Preston coefficient, which is a measure of lapping process efficiency.

This invention is an apparatus for use in 100% leak testing of food containers used in conjunction with a tracer gas. It includes a shell with entrance and exit air locks to create a controlled atmosphere through which a series of containers is conveyed by a conveyor belt. Pressure in the shell is kept lower than that in the containers and the atmosphere is made to flow with the containers so that a tracer gas placed in the packages before sealing them will leak more readily, but the leaked tracer gas will remain associated with the leaking package as it moves through the shell. The leaks are detected with a sniffer probe in fluid communication with a gas chromatograph (GC). The GC issues a signal when it detects a leak to an ejector that eject the leaking container from the conveyor. The system is timed so that the series of containers can move continuously into and out of the shell, past the probe and the ejector, without stopping, yet each package is tested for leaks and removed if leaking.

The design of the F- and H-Area Seepage Basin contaminated groundwater remediation system requires information from multiple well pump tests (Reference 1). Soil percolation rates are needed in order to support the multiple well pump test planning. The objective of this task was to determine characteristic percolation rates for soils in four select areas where infiltration galleries are proposed. These infiltration galleries will be temporary installations built on the ground surface and used to disposes of water from the multiple well pump tests. A procedure defining the specific work process for collecting percolation rate data is contained in Appendix 3. Results from these percolation tests will be used in the design of infiltration galleries for the disposal of well water extracted during the multiple well pump tests.

The objectives for this research were two-fold: To identify means of using measurements of the outgoing radiation stream from earth to identify mechanisms of climate change; and to develop a flexible radiation code based upon the correlated-k method to enable rapid and accurate calculations of the outgoing radiation. The intended products are three papers and a radiation code. The three papers are to be on Entropy fluxes and the dissipation of the climate system, Radiation fingerprints of climate change, and A rapid correlated-k code.

This report discusses and summarize the role of heating and non-inductive current drive in ITER as: (1) ITER must have heating power sufficient for ignition. (2) The heating system must be capable of current drive. (3) Steady-state operation is an ``ultimate goal.`` It is recognized that additional heating and current drive power (beyond what is initially installed on ITER) may be required. (4) The ``Ultimate goal of steady-state operation`` means steady-state with Q{sub CD} {ge} 5. Unlike the ``Terms of Reference`` for the ITER CDA, the ``ITER Technical Objectives and Approaches`` for the EDA sets no goal for the neutron wall load during steady-state operation. (5) In addition to bulk current drive, the ITER heating and current drive system should be used for current profile control and for burn control.

Newsletter of the Texas Department of Health discussing the news, activities, and events of the organization and other information related to health in Texas.

The 1993 Roadmap for the Uranium Mill Tailings Remedial Action (UMTRA) Project office is a tool to assess and resolve issues. The US Department of Energy (DOE) UMTRA Project Office uses the nine-step roadmapping process as a basis for Surface and Groundwater Project planning. This is the second year the Roadmap document has been used to identify key issues and assumptions, develop logic diagrams, and outline milestones. This document is a key element of the DOE planning process. A multi-interest group used the nine-step process to focus on issues, root cause analysis and resolutions. This core group updated and incorporated comments on the basic assumptions, then used these assumptions to identify issues. The list of assumptions was categorized into the following areas: institutional, regulatory compliance, project management, human resource requirements, and other site-specific assumptions. The group identified 10 issues in the analysis phase. All of the issues are ranked according to importance. The number one issue from the 1992 Roadmap, ``Lack of sufficient human resources,`` remained the number one issue in 1993. The issues and their ranking are as follows: Lack of sufficient human resources; increasing regulatory requirements; unresolved groundwater issues; extension of UMTRCA through September 30, 1998; lack of …

This report presents estimates of proved reserves of crude oil, natural gas, and natural gas liquids as of December 31, 1992, as well as production volumes for the United States, and selected States and State subdivisions for the year 1992. Estimates are presented for the following four categories of natural gas: total gas (wet after lease separation), its two major components (nonassociated and associated-dissolved gas), and total dry gas (wet gas adjusted for the removal of liquids at natural gas processing plants). In addition, two components of natural gas liquids, lease condensate and natural gas plant liquids, have their reserves and production data presented. Also included is information on indicated additional crude oil reserves and crude oil, natural gas, and lease condensate reserves in nonproducing reservoirs. A discussion of notable oil and gas exploration and development activities during 1992 is provided.

For the purposes of this report, tight gas reservoirs are defined as those that meet the Federal Energy Regulatory Commission`s (FERC) definition of tight. They are generally characterized by an average reservoir rock permeability to gas of 0.1 millidarcy or less and, absent artificial stimulation of production, by production rates that do not exceed 5 barrels of oil per day and certain specified daily volumes of gas which increase with the depth of the reservoir. All of the statistics presented in this report pertain to wells that have been classified, from 1978 through 1991, as tight according to the FERC; i.e., they are ``legally tight`` reservoirs. Additional production from ``geologically tight`` reservoirs that have not been classified tight according to the FERC rules has been excluded. This category includes all producing wells drilled into legally designated tight gas reservoirs prior to 1978 and all producing wells drilled into physically tight gas reservoirs that have not been designated legally tight. Therefore, all gas production referenced herein is eligible for the Section 29 tax credit. Although the qualification period for the credit expired at the end of 1992, wells that were spudded (began to be drilled) between 1978 and May 1988, and …