D-0 South End Cap Calorimeter Cold Test Results (open access)

D-0 South End Cap Calorimeter Cold Test Results

The South endcap calorimeter vessel was moved into Lab A on Sept. 18, 1990. A cooldown of the pressure vessel with liquid nitrogen was performed on Sept. 26 to check the vessel's integrity. With the pressure vessel cold, the insulating vacuum was monitored for leaks. Through out the testing, the insulating vacuum remained good and the vessel passed the test. The cold test was carried out per the procedures of D-Zero engineering note 3740.220-EN-250. The test was very similar to the cold test performed on the Central Calorimeter in October of 1987. The test of the ECS was performed in the same manner using the same equipment as the ECN cold test. Reference D-Zero engineering notes 3740.210-EN-122, 3740.000-EN-I07, and 3740.210-EN-II0 for information about the CC cold test. Reference EN-260 for the results of the ECN cold test. The insulating vacuum space was pumped on while equipment was being connected to the pressure vessel. Two hours after starting to pump with the blower the vacuum space pressure was at about 40 microns. The pumping continued overnight (another 16 hours). In the morning the pressure was 11.5 microns. A rate of rise test was performed. With the pump valved off, the pressure …
Date: November 26, 1990
Creator: Rucinski, R.
Object Type: Report
System: The UNT Digital Library
2-D Axisymmetric Line Transport (open access)

2-D Axisymmetric Line Transport

The methods used in the ALTAIR code for computing the transfer of spectral line radiation in two-dimensional axially-symmetric geometry are described. ALTAIR uses a variable-Eddington-tensor approach, in which the transfer equation of non-coherent line scattering is written in moment form, and the moments are closed with an assumed tensor relating the monochromatic pressure tensor and energy density; this Eddington tensor is obtained self-consistently using an accurate angle-dependent solution of the transfer equation. The finite element method for solving the moment system, and the discontinuous finite element method for solving the S{sub n} equation of transfer are described. Two applications of the method are discussed: line formation in uniform cylinders with different length-diameter ratios, and monochromatic transfer on an irregular x-y mesh (the Mordant test problem). 13 refs., 2 figs.
Date: November 20, 1990
Creator: Castor, John I.; Dykema, Pieter G. & Klein, Richard I.
Object Type: Article
System: The UNT Digital Library
3 Dimensional radiation transport in dispersive media (open access)

3 Dimensional radiation transport in dispersive media

In plasmas the collective motion of free electrons affects the propagation of radiation by bending the light ray trajectory. The closer the light wave frequency is to the electron plasma frequency in value, the more pronounced the effect. We will present the results of radiation transport calculations in 3 spatial dimensions in the refractive plasma environment and compare the calculation to one done where the ray bending has been neglected (straight line ray paths). We also present the numerical method used for the refractive transport. 4 refs., 5 figs.
Date: November 1, 1990
Creator: Mayle, R.W.
Object Type: Article
System: The UNT Digital Library
1990 National Compensation Survey of Research and Development Scientists and Engineers (open access)

1990 National Compensation Survey of Research and Development Scientists and Engineers

This report presents the results of the fourth in a new series of surveys of compensation and benefits for research and development (R D) scientists and engineers (S Es). The 1990 Survey represents the largest nationwide database of its kind, covering 104 establishments which provided data on almost 41,000 degreed researchers in the hard'' sciences. The fundamental nature of the survey has not changed: the focus is still on medium- and large-sized establishments which employ at least 100 degreed S Es in R D. The 1990 Survey contains data which cover about 18% of all establishments eligible to participate, encompassing approximately 18% of all eligible employees. As in the last three years, the survey sample constitutes a fairly good representation of the entire population of eligible establishments on the basis of business sector, geographic location, and size. Maturity-based analyses of salaries for some 34,000 nonsupervisory researchers are provided, as are job content-based analyses of more than 27,000 individual contributors and almost 5000 first level supervisors and division directors. Compensation policies and practices data are provided for 102 establishments, and benefits plans for 62 establishments are analyzed.
Date: November 1, 1990
Creator: unknown
Object Type: Report
System: The UNT Digital Library
3D Particle Simulation of Beams Using the Warp Code: Transport Around Bends (open access)

3D Particle Simulation of Beams Using the Warp Code: Transport Around Bends

WARP is a discrete-particle simulation program which was developed for studies of space charge dominated ion beams. It combines features of an accelerator code and a particle-in-cell plasma simulation. The code architecture, and techniques employed to enhance efficiency, are briefly described. Current applications are reviewed. In this paper we emphasize the physics of transport of three-dimensional beams around bends. We present a simple bent-beam PIC algorithm. Using this model, we have followed a long, thin beam around a bend in a simple racetrack system (assuming straight-pipe self-fields). Results on beam dynamics are presented; no transverse emittance growth (at mid-pulse) is observed. 11 refs., 5 figs.
Date: November 30, 1990
Creator: Friedman, A.; Grote, D. P.; Callahan, D. A.; Langdon, A. B. & Haber, I.
Object Type: Article
System: The UNT Digital Library
3D simulations of axially confined heavy ion beams in round and square pipes (open access)

3D simulations of axially confined heavy ion beams in round and square pipes

We have been using the 3d PIC code WARP6 to model the behavior of beams in a heavy ion induction accelerator; such linacs are candidates for an ICF driver. Improvements have been added to the code to model an axially confined beam using comoving axial electric fields to simulate the confining ears'' applied to the accelerating pulses in a real system. We have also added a facility for modeling a beam in a round pipe, applying a capacity matrix to each axial Fourier mode in turn. These additions are described along with results, such as the effect of pipe shape on the beam quality degradation from quadrupole misalignments. 4 refs., 6 figs., 1 tab.
Date: November 30, 1990
Creator: Grote, D. P.; Friedman, A. (Lawrence Livermore National Lab., CA (USA)) & Haber, I. (Naval Research Lab., Washington, DC (USA))
Object Type: Article
System: The UNT Digital Library
Abiotic immobilization/detoxification of recalcitrant organics (open access)

Abiotic immobilization/detoxification of recalcitrant organics

In contrast to many remedial techniques that simply transfer hazardous wastes from one part of the environment to another (e.g., off-site landfilling), in situ restoration may offer a safe and cost-effective solution through transformation (to less hazardous products) or destruction of recalcitrant organics. Currently, the US Environmental Protection Agency and US Department of Energy are encouraging research that addresses the development of innovative alternatives for hazardous-waste control. One such alternative is biotic and abiotic immobilization and detoxification of polynuclear aromatic hydrocarbons (PNAs) as associated with the soil humification process. This paper discusses (1) the possibility of using abiotic catalysis (with manganese dioxide) to polymerize organic substances; (2) aspects associated with the thermodynamics and kinetics of the process, and (3) a simple model upon which analyses may be based. 36 refs., 7 figs., 3 tabs.
Date: November 1, 1990
Creator: Whelan, G. & Sims, R. C.
Object Type: Article
System: The UNT Digital Library
Accelerated Leach Test Development Program Annual Report: 1990 (open access)

Accelerated Leach Test Development Program Annual Report: 1990

In FY 1989, a draft accelerated leach test for solidified waste was written. Combined test conditions that accelerate leaching were validated through experimental and modeling efforts. A computer program was developed that calculates test results and models leaching mechanisms. This program allows the user to determine if diffusion controls leaching and, if this is the case, to make projections of releases. Leaching mechanisms other than diffusion (diffusion plus source term partitioning and solubility limited leaching) are included in the program is indicators of other processes that may control leaching. Leach test data are presented and modeling results are discussed for laboratory scale waste forms composed of portland cement containing sodium sulfate salt, portland cement containing incinerator ash, and vinyl ester-styrene containing sodium sulfate. 16 refs., 38 figs., 5 tabs.
Date: November 1990
Creator: Fuhrmann, M.; Pietrzak, R. F.; Heiser, J.; Franz, E. M. & Colombo, P.
Object Type: Report
System: The UNT Digital Library
Activities of the National Academy of Sciences in relation to the Radiation Effects Research Foundation (open access)

Activities of the National Academy of Sciences in relation to the Radiation Effects Research Foundation

None
Date: November 1, 1990
Creator: Edington, C.W.
Object Type: Report
System: The UNT Digital Library
Activities of the National Academy of Sciences in relation to the Radiation Effects Research Foundation. Progress report, April 1990--December 1990 (open access)

Activities of the National Academy of Sciences in relation to the Radiation Effects Research Foundation. Progress report, April 1990--December 1990

None
Date: November 1, 1990
Creator: Edington, C. W.
Object Type: Report
System: The UNT Digital Library
Advanced design and modeling concepts for recombination x-ray lasers (open access)

Advanced design and modeling concepts for recombination x-ray lasers

Geometric, kinetic, and trapping issues, in short and ultrashort recombination x-ray lasers, are discussed. The design of a composite target consisting of a lasant strip on a plastic backing is described. Examples of modeling showing the effect of photon trapping and uncertainties in other physical processes on calculated gain coefficients are given. A simple and accurate expression for photon trapping in cylindrical geometry is presented. Recombination lasers that have the ground state as the lower laser state are shown to have small I{sub sat}'s and corresponding low efficiencies. Scaling laws for femtosecond laser-plasma interactions are presented. 19 refs.
Date: November 29, 1990
Creator: Eder, D.C.; Rosen, M.D.; Shephard, R.; Staffin, R.; Nash, J.K. & Keane, C.J.
Object Type: Article
System: The UNT Digital Library
Advanced development of particle beam probe diagnostic systems (open access)

Advanced development of particle beam probe diagnostic systems

This progress report covers the period starting with the approval to go ahead with the 2 MeV heavy ion beam probe (HIBP) for TEXT Upgrade to the submission of the grant renewal proposal. During this period the co-principal investigators, R. L. Hickok and T. P. Crowley have each devoted 45% of their time to this Grant. Their effort has been almost exclusively devoted to the design and fabrication of the 2 MeV HIBP system. The 1989 report that described the advantages of a 2 MeV HIBP for TEXT Upgrade compared to the existing 0.5 MeV HIBP and outlined the design of the 2 MeV system is attached as Appendix A. Since the major effort under the renewal proposal will be the continued fabrication, installation and operation of the 2 MeV system on TEXT Upgrade, we describe some of the unique results that have been obtained with the 0.5 MeV system on TEXT. For completeness, we also include the preliminary operation of the 160 keV HIBP on ATF. We present the present fabrication status of the 2 MeV system with the exception of the electrostatic energy analyzer. The energy analyzer which is designed to operate with 400 kV on the top …
Date: November 1, 1990
Creator: Hickok, R. L.; Crowley, T. P. & Connor, K. A.
Object Type: Report
System: The UNT Digital Library
Advanced liquid-metal-reactor development at ANL during the 1980s (open access)

Advanced liquid-metal-reactor development at ANL during the 1980s

The fundamental long-term rationale for the liquid-metal reactor (LMR) remains unchanged - to provide for resource extension by consuming the more abundant isotope of uranium. The design goals for the next generation of breeder reactors include a concerted effort to provide engineering solutions that can positively impact on the technical issues and on the public perception issues that harry the current generation of commercial power reactors. The work at Argonne National Laboratory since late 1983 has approached these design goals for the next-generation-reactor enterprise as a whole and has based the approach on a closed, fissile-self-sufficient, transuranic-self-consuming fuel cycle that employs a uranium/plutonium metallic alloy fuel form. Pyrometallurgically based reprocessing and remote injection casting fuel refabrication form the basis on which the closed fuel cycle is expected to provide low fuel cycle costs even on an incremental dedicated fuel cycle facility basis. Passive safety features that decouple reactor shutdown and decay heat removal from reliance on balance-of-plant equipment form the basis for reduced capital costs. Preapproved licensing form the basis for shorter and more predictable construction cycles. Incomplete fission product separation and incomplete uranium/plutonium separation of the product streams provide for a deterrent to subnational diversion. Finally, the waste management …
Date: 1990-11~
Creator: Wade, David C.
Object Type: Article
System: The UNT Digital Library
Advanced methods for the computation of particle beam transport and the computation of electromagnetic fields and beam-cavity interactions (open access)

Advanced methods for the computation of particle beam transport and the computation of electromagnetic fields and beam-cavity interactions

The University of Maryland Dynamical Systems and Accelerator Theory Group carries out research in two broad areas: the computation of charged particle beam transport using Lie algebraic methods and advanced methods for the computation of electromagnetic fields and beam-cavity interactions. Important improvements in the state of the art are believed to be possible in both of these areas. In addition, applications of these methods are made to problems of current interest in accelerator physics including the theoretical performance of present and proposed high energy machines. The Lie algebraic method of computing and analyzing beam transport handles both linear and nonlinear beam elements. Tests show this method to be superior to the earlier matrix or numerical integration methods. It has wide application to many areas including accelerator physics, intense particle beams, ion microprobes, high resolution electron microscopy, and light optics. With regard to the area of electromagnetic fields and beam cavity interactions, work is carried out on the theory of beam breakup in single pulses. Work is also done on the analysis of the high behavior of longitudinal and transverse coupling impendances, including the examination of methods which may be used to measure these impedances. Finally, work is performed on the …
Date: November 1, 1990
Creator: Dragt, Alex J. & Gluckstern, Robert L.
Object Type: Report
System: The UNT Digital Library
The alias method: A fast, efficient Monte Carlo sampling technique (open access)

The alias method: A fast, efficient Monte Carlo sampling technique

The alias method is a Monte Carlo sampling technique that offers significant advantages over more traditional methods. It equals the accuracy of table lookup and the speed of equal probable bins. The original formulation of this method sampled from discrete distributions and was easily extended to histogram distributions. We have extended the method further to applications more germane to Monte Carlo particle transport codes: continuous distributions. This paper presents the alias method as originally derived and our extensions to simple continuous distributions represented by piecewise linear functions. We also present a method to interpolate accurately between distributions tabulated at points other than the point of interest. We present timing studies that demonstrate the method's increased efficiency over table lookup and show further speedup achieved through vectorization. 6 refs., 2 figs., 1 tab.
Date: November 16, 1990
Creator: Rathkopf, James A.; Edwards, Arthur L. & Smidt, Rorbert K.
Object Type: Article
System: The UNT Digital Library
The All Particle Monte Carlo method: Atomic data files (open access)

The All Particle Monte Carlo method: Atomic data files

Development of the All Particle Method, a project to simulate the transport of particles via the Monte Carlo method, has proceeded on two fronts: data collection and algorithm development. In this paper we report on the status of the data libraries. The data collection is nearly complete with the addition of electron, photon, and atomic data libraries to the existing neutron, gamma ray, and charged particle libraries. The contents of these libraries are summarized.
Date: November 6, 1990
Creator: Rathkopf, J.A.; Cullen, D.E. & Perkins, S.T.
Object Type: Article
System: The UNT Digital Library
ALS insertion devices (open access)

ALS insertion devices

The Advanced Light Source (ALS), the first US third generation synchrotron radiation source, is currently under construction at the Lawrence Berkeley Laboratory. The low-emittance, 1.5 GeV electron storage ring and the insertion devices are specifically designed to produce high brightness beams in the UV to soft X-Ray range. The planned initial complement of insertion devices includes four 4.6 m long undulators, with period lengths of 3.9 cm, 5.0 cm (2) and 8.0 cm, and a 2.9 m long wiggler of 16 cm period length. Undulator design is well advanced and fabrication has begun on the 5.0 cm and 8.0 cm period length undulators. This paper discusses ALS insertion device requirements; general design philosophy; and design of the magnetic structure, support structure/drive systems, control system and vacuum system. 18 refs., 9 figs., 5 tabs.
Date: November 1, 1990
Creator: Hoyer, E.; Chin, J.; Halbach, K.; Hassenzahl, W.V.; Humphries, D.; Kincaid, B. et al.
Object Type: Article
System: The UNT Digital Library
Ammonium silicate diagenesis and its influence on the interpretation of fixed-ammonium anomalies as an exploration tool (open access)

Ammonium silicate diagenesis and its influence on the interpretation of fixed-ammonium anomalies as an exploration tool

The study of nitrogen (NH{sub 4}{sup +}) diagenesis associated with hydrocarbon occurrences is intended to aid in predicting favorable areas of petroleum exploration and recovery by establishing a better understanding of the interaction of organic maturation products with clastic sedimentary sequences. This research has indicated that fixed-NH{sub 4} in clays preserves anomalous NH{sub 4}{sup +} abundances, thus recording a significant reaction in the maturation of hydrocarbons which correlates with the oil window. Fixed-NH{sub 4} concentrations are independent of total organic carbon content, but increase with organic maturity in source rocks (up to T{approx}140 C). The authors have found anomalously high fixed-NH{sub 4} concentrations in oil and gas reservoirs, and in sandstones that may have acted as migration conduits for a nearby oilfield. The remainder of the project period will be spent completing publications, and finalizing the interpretation of results on fixed-NH{sub 4} in the Salton Sea (SSDP) and Monterey Fm. The data that authors have collected from these areas will allow them to examine the effect of high temperatures and high-N organic matter (prevalent on the west coast) on levels of NH{sub 4}-fixation. The authors will also develop some preliminary ideas on the mechanism of NH{sub 4}{sup +} oxidation responsible …
Date: November 30, 1990
Creator: Williams, L.B. & Ferrell, R.E. Jr.
Object Type: Report
System: The UNT Digital Library
Amplitude analysis of the K anti K system in J/. psi. radiative decay (open access)

Amplitude analysis of the K anti K system in J/. psi. radiative decay

Preliminary results of a mass independent amplitude analysis of J/{psi} radiative decays into K {bar K} final states are presented. A large component of spin zero is observed at the f{sub 2}/{theta}(1720) mass region; however, a small spin two component at this mass region cannot be excluded with the present statistics. 9 refs., 7 figs.
Date: November 1, 1990
Creator: Chen, Liang-Ping (Vanderbilt Univ., Nashville, TN (USA). Dept. of Physics and Astronomy)
Object Type: Article
System: The UNT Digital Library
Analysis of applications of solar technology for the treatment of chlorinated organic waste (open access)

Analysis of applications of solar technology for the treatment of chlorinated organic waste

Recent work has demonstrated that concentrated solar energy can destroy many hazardous chemical that are of national concern including dioxins, polychlorinated biphenyls (PCBs), and chlorinated solvents. A detailed systems analysis was performed to determine the applicability of solar detoxification to the treatment of chlorinated solvents. This work determined the cost of destruction of trichlorethylene (TCE) a using conventional and a solar-based technology were compared for this application. This work provides a basis for choosing an application in which solar energy can be used to its fullest potential to solve a growing national problem. 9 refs., 8 figs.
Date: November 1, 1990
Creator: Glatzmaier, G C
Object Type: Article
System: The UNT Digital Library
Analysis of Core Damage Frequency Due to External Events at the DOE (Department of Energy) N-Reactor (open access)

Analysis of Core Damage Frequency Due to External Events at the DOE (Department of Energy) N-Reactor

A complete external events probabilistic risk assessment has been performed for the N-Reactor power plant, making full use of all insights gained during the past ten years' developments in risk assessment methodologies. A detailed screening analysis was performed which showed that all external events had negligible contribution to core damage frequency except fires, seismic events, and external flooding. A limited scope analysis of the external flooding risk indicated that it is not a major risk contributor. Detailed analyses of the fire and seismic risks resulted in total (mean) core damage frequencies of 1.96E-5 and 4.60E-05 per reactor year, respectively. Detailed uncertainty analyses were performed for both fire and seismic risks. These results show that the core damage frequency profile for these events is comparable to that found for existing commercial power plants if proposed fixes are completed as part of the restart program. 108 refs., 85 figs., 80 tabs.
Date: November 1, 1990
Creator: Lambright, J. A.; Bohn, M. P.; Daniel, S. L.; Baxter, J. T.; Johnson, J. J.; Ravindra, M. K. et al.
Object Type: Report
System: The UNT Digital Library
Analysis of meteorological data from three sites in the northeastern United States for application of EPA AIRDOS code (open access)

Analysis of meteorological data from three sites in the northeastern United States for application of EPA AIRDOS code

Meteorological data for the entire year of 1989 were collected at three sites that comprise the Knolls Atomic Power Laboratory: Knolls site, Kesselring site, and Windsor site. These data are 15-min averages of wind speed, wind direction, standard deviation of wind direction, and temperature. Hourly averages were computed and used for all analysis. The Pasquill stability category was computed using procedures established by the Environmental Protection Agency. Joint frequency of wind speed, direction, and stability were computed and displayed as wind roses for each stability. The joint frequency tables are presented in the form that is appropriate as meteorological input for the AIRDOS-EPA dispersion model. 5 refs., 5 tabs.
Date: November 1, 1990
Creator: Gouveia, F.
Object Type: Report
System: The UNT Digital Library
Analysis, Volume 11, Number 11, November 1990 (open access)

Analysis, Volume 11, Number 11, November 1990

Periodic newsletter discussing information related to legislation, state finance, and other topics related to Texas government. This issue focuses on corporate taxes in Texas, including rankings, results, hypothetical comparisons, and more.
Date: November 1990
Creator: Texas Research League
Object Type: Journal/Magazine/Newsletter
System: The Portal to Texas History
Annual review of cultural resource investigations by the Savannah River Archaeological Research Program, fiscal year 1990 (open access)

Annual review of cultural resource investigations by the Savannah River Archaeological Research Program, fiscal year 1990

The Savannah River Archaeological Research Program (SRARP) of the South Carolina Institute of Archaeology and Anthropology, University of South Carolina, is funded through a direct contract with the United States Department of Energy to provide services required under federal law for the protection and management of archaeological resources on the Savannah River Site (SRS). Because the significance of most archaeological resources is dependent upon research potential, the SRARP is guided by research objectives. An on-going research program provides the problems, methods and means of assessing site significance within the compliance process specified by law. In addition, the SRARP maintains an active program of public education to disseminate knowledge about prehistory and history, and to enhance public awareness about historic preservation. The following report summarizes the management, research and public education activities of the SRARP during Fiscal Year 1990.
Date: November 1, 1990
Creator: unknown
Object Type: Report
System: The UNT Digital Library