A comparison of TRAC and RELAP5 predictions of steady-state and DEGB LOCA results (FI phase) for K-14.1 has been made. Both codes had been previously benchmarked against 1985 L Reactor AC Flow data and were under configuration control. The purpose of the code-to-code comparison is to provide insight on the transient uncertainty in TRAC plenum and tank bottom plenum pressures. The comparisons focus on LOCA results between 0.5 and 2.0 s, which is the primary period of interest for Flow Instability (FI) limits.

All projects are working toward a goal for describing the three dimensional nuclear topography in terms of relative spatial relationships among genes (specific DNA sequence). Methods are now being perfected to detect these genes, quantitatively and spatially, to perturb these genes specifically, and to measure the perturbation in order to assure specificity. We are developing methods to assay, after perturbation of the target DNA within living cells, whether or not only the target sequence are attacked while other sequences remain unharmed. We are now at the stage to do chemical gene modification or masking within living cells in a strictly sequence-specific manner. Soon, we will be able to study the function and the physical location of each gene in living cells with exquisite specificity. 25 refs., 15 figs.

The Filter Compartment (FC) in this analysis is a generic reactor airborne activity confinement filter compartment which possesses all the essential physical and mechanical properties of the Savannah River Site (SRS) confinement filters of Reactor Buildings K, L, and P. The filters belong to the Airborne Activity Confinement System (AACS). These filters absorb a significant amount of radioactive effluents from the exhausting air. The seismic excitation is input indirectly from the output of the seismic analysis of the 105 exhaust stack building in the form of floor response spectra. However, the 105 exhaust stack building was analyzed for seismic motions defined by free-field ground response spectra with a ZPA (Zero Period Acceleration) of 0.2G for all three orthogonal components of ground motion and a shape consistent with USNRC Regulatory Guide 1.60. Based upon equivalent dynamic analysis of the FC, DuPont engineers suggested modifications on the existing FC with heavy I-section beams (1). The scope of this phase I'' analysis, as requested by Seismic Engineering (2), is to carry out a scoping analysis'' of Frequency Analysis and Response Spectrum Analysis of the FC with DuPont suggested conceptual modifications. Our suggestion was that the existing FC without conceptual modifications be analyzed first. …

An isotopic heat source is formed using stacks of thin individual layers of a refractory isotopic fuel, preferably thulium oxide, alternating with layers of a low atomic weight diluent, preferably graphite. The graphite serves several functions: to act as a moderator during neutron irradiation, to minimize bremsstrahlung radiation, and to facilitate heat transfer. The fuel stacks are inserted into a heat block, which is encased in a sealed, insulated and shielded structural container. Heat pipes are inserted in the heat block and contain a working fluid. The heat pipe working fluid transfers heat from the heat block to a heat exchanger for power conversion. Single phase gas pressure controls the flow of the working fluid for maximum heat exchange and to provide passive cooling.

A 40 mm bore quadrupole magnet design, called QC'', has been made for the SSC with the following parameters: 208 T/m gradient at 6500A, 2-layer cos 2 {theta}'' winding arrangement with 30 strand cable and one spacer wedge per coil. Structural support is provided by self-supporting interlocking collars; two types of symmetrical laminations are pre-assembled into collar packs for ease of assembly. This paper will describe the design of a prototype quadrupole magnet for the SSC and preliminary tests results on 1 m models. 7 refs., 6 figs., 2 tabs.

During the second quarter of 1990 the wells which make up the H-Area Seepage Basins (H-HWMF) monitoring network were sampled. Laboratory analyses were performed to measure levels of hazardous constituents, indicator parameters, tritium, nonvolatile beta, and gross alpha. A Gas Chromatograph Mass Spectrometer (GCMS) scan was performed on all wells sampled to determine any hazardous organic constituents present in the groundwater. The primary contaminants observed at wells monitoring the H-Area Seepage Basins are tritium, nitrate, mercury, gross alpha, nonvolatile beta, trichloroethylene (TCE), tetrachloroethylene, lead, cadmium, arsenic, and total radium. Concentrations of at least one of the following constituents: tritium, nitrate, total radium, gross alpha, nonvolatile beta, mercury, lead, cadmium, trichloroethylene chromium, and arsenic in excess of the primary drinking water standard (PDWS) were observed in at least one well monitoring the H-Area Seepage Basins. Elevated levels of tritium above the PDWS were exhibited in seventy-seven of the 105 (73%) groundwater monitoring wells. Elevated levels of nitrate in excess of the PDWS were exhibited in forty-four of the 105 (42%) monitoring wells.

Several designs for the Superconducting Super Collider dipole magnet have been analyzed. This note discusses the mechanical and electromagnetic features of each design. Electromagnetic and Mechanical analyses were performed using hand, computer programs and finite element techniques to evaluate the design. 10 refs., 6 figs., 3 tabs.

This is the final report for the research project titled L to H Mode Transitions and Associated Phenomena in Divertor Tokamaks.'' The period covered by this project is the fiscal year 1990. This report covers the development of Advanced Two Chamber Model.

The primary objective of the project is to investigate the magnetic nature of the higher alcohol synthesis catalyst-Cu/Co supported on specific supports: chromia and titania with and without an alkali metal promoter, and examine the relations between catalytic and magnetic properties.

The objectives of this research program are to: investigate forefront problems in experimental intermediate energy physics; educate students in this field of research; and, develop the instrumentation necessary to undertake this experimental program. Generally, the research is designed to search for physical processes which cannot be explained by conventional models of elementary interactions. This includes the use of nuclear targets where the nucleus provides a many body environment of strongly perturbation of a known interaction by this environment. Unfortunately, such effects may be masked by the complexity of the many body problem and may be difficult to observe. Therefore, experiments must be carefully chosen and analyzed for deviations from the more conventional models. There were three major thrusts of the program; strange particle physics, where a strange quark is embedded in the nuclear medium; muon electro-weak decay, which involves a search for a violation of the standard model of the electro-weak interaction; and measurement of the spin dependent structure function of the neutron.

The effects of quench propagation are modeled in 40mm and 50mm diameter collider dipole magnet designs. A comparative study of the cold diode (passive) and quench heater (active) protection schemes will be presented. The SSCQ modeling program accurately simulates the axial quench velocity and uses phenomenological time delays for turn-to-turn transverse propagation. The axial quench velocity is field dependent and consequently, each conductor's quench profile is tracked separately. No symmetry constraints are employed and the distribution of the temperatures along the conductor differs from the adiabatic approximation. A single magnet has a wide margin of self protection which suggests that passive protection schemes must be considered. 6 refs., 3 figs., 1 tab.

The National Highway Planning Network is a data base of major highways in the continental United States. It is a foundation for analytic studies of highway performance, for vehicle routing and scheduling problems, and for mapping purposes. The network is based on a set of roadways digitized from the National Atlas by the US Geological Survey. It has been enhanced at Oak Ridge National Laboratory by adding additional roads and attribute detail and correcting topological errors to produce a true analytic network. This documentation is intended primarily to assist users of this data base by describing its structure, data elements, and development.

Over the past 25 years, researchers have written numerous deduction systems based on resolution and paramodulation. Of these systems, a very few have been capable of generating and maintaining a formula database "containing more than just a few thousand clauses. These few systems were used to explore mechanisms for rapidly extracting limited subsets of relevant" clauses. We have written this tutorial to reflect some of the best ideas that have emerged and to cast them in a form that makes them easily accessible to students wishing to write their own high-performance systems.

Fluid-elastic instability of loosely supported tubes, vibrating in a tube-support-plate (TSP) inactive mode, is suspected to be one of the main causes of tube failure in some operating steam generators and heat exchangers. This report presents a mathematical model for fluid-elastic instability of loosely supported tubes exposed to non-uniform cross-flow. The model incorporates all motion-dependent fluid forces based on the unsteady flow theory. In the unstable region associated with a TSP-inactive mode, tube motion can be described by two linear models: TSP-inactive mode when tubes do not strike the TSP, and TSP-active mode when tubes do strike the TSP. A bilinear model (consisting of these linear models) presented in this report simulates the characteristics of fluid-elastic instability of loosely supported tubes in stable and unstable regions associated with TSP-inactive modes. Analytical results obtained with the model are compared with published experimental data; they agree reasonably well. The prediction procedure presented for fluid-elastic instability response of loosely supported tubes is applicable to the stable and unstable regions of the TSP-inactive mode.

The report tabulates both radioactive and nonradioactive liquid and airborne effluent data for 300, 400, and 1100 Area operations at the Hanford Site. The 300 Area is primarily a research and development area. The 400 Area houses the Fast Flux Test Facility. The 1100 Area contains central stores and vehicle maintenance facilities. Releases to the environment from Westinghouse Hanford Company operations within these areas during calendar year 1989 were both consistent with previous years and within regulatory limits. 2 refs., 10 tabs.

Late in 1988, a prototype high speed cable machine was built by industry and delivered in FY88 for the Superconducting Super Collider (SSC), and delivered to New England Electric Wire Corp. for the fabrication of SSC cable. This cabling machine has produced the majority of the cable needed for the SSC Dipole Program. During the past year and a half we have experienced several cabling difficulties that were not seen previously. These difficulties were due to new techniques and equipment relating to the high speed production of cable meeting SSC specifications. These difficulties included mandrel alignment, Turk's-head roller alignment, and Turk's-head drive equipment. The solution to these problems are discussed with the SSC specification in detail. 2 refs., 6 figs.

This report profiles the structures of four domestic nonferrous metals industries (copper, aluminurn, lead, and zinc) and the changes they have undergone since 1980. The study also outlines the U.S. position in the world markets.

The report discusses the oral health of children eligible for Medicaid, the House Committee on Energy and Commerce and its Subcommittee on Health and the Environment requested OTA to determine whether children eligible for Medicaid are provided at least a minimum level of dental care. This study compares the dental manuals of seven State Medicaid programs with a set of “basic’ dental services (which comprise shared components of various well-accepted dental guidelines) to see if States allow these particular services.

This report is about access of people in rural America to basic health care services. This report focuses on trends in the availability of primary and acute health care in rural areas and factors affecting those trends.

This report describes the unconventional cancer treatments that are most used by U.S. cancer patients; it describes the way in which people find out about them and how much they pay for them; reviews the claims made for them and the information base in support of the claims; suggests possible ways of generating valid information about their safety and effectiveness; and presents the legal issues surrounding unconventional treatments that have brought civil and criminal litigation to bear on the subject.

This report focuses on the training given to employed workers both from the standpoint of the competitiveness of U.S. industry and from the standpoint of the individual worker who may need training to advance. Most workers who get training get it from their employer, and much of the report looks at the employer provided training system. The message of this report is that the debate about national training policies needs to be broadened to encompass not only training programs for the economically disadvantaged, the displaced worker, or people with special needs, but also those who stand on the front line of American productivity-employed workers at all levels.

This report responds to requests by the House Committee on Energy and Commerce and the House Committee on Government Operations to assess the role that communication and information technologies play in the securities markets. The Committee desired a benchmark for gauging progress made toward the national market system envisioned by the 1975 Act. This report assesses the current use of information technology by U.S. securities exchanges and over-the-counter dealers, by related futures and options markets, and by associated industries and regulatory agencies.

The Hawaii Deep Water Cable Program has succeeded unequivocally in determining the feasibility of deploying a submarine power cable system between the islands of Hawaii and Oahu. Major accomplishments of the program include designing, fabricating and testing an appropriate power cable, developing an integrated system to control all aspects of the cable laying operation, and testing all deployment systems at sea in the most challenging sections of the route.

On August 11, 1990 during an ornithological survey at the True/Mid Pacific Geothermal Venture proposed well site No.2, a Hawaiian hawk (Buteo solitarius) nest with a nestling was found approximately 430 feet from the proposed well pad clearing. The U.S. Fish and Wildlife Service and the State of Hawaii have listed the Hawaiian hawk as an endangered species. Future development in this area could be impacted by the presence of this endangered avian species and its nest in such close proximity to the proposed well site. This report summarizes the results of observations at the nest on August 12, 19 and 25 and September 2, 1990.