The purpose of this work was to demonstrate, in a real building situation, the energy and peak demand reduction capabilities of an electronically ballasted lighting control system that can utilize all types of control strategies to efficiently manage lighting. The project has demonstrated that a state-of-the-art electronically ballasted dimmable lighting system can reduce energy and lighting demand by as least 50% using various combinations of control strategies. By reducing light levels over circulation areas (tuning) and reducing after hours light levels to accommodate the less stringent lighting demands of the cleaning crew (scheduling), lighting energy consumption on weekdays was reduced an average of 54% relative to the initial condition. 10 refs., 14 figs., 3 tabs.

The objectives of this study are to determine the location and source of the 18- and 60-Hz vibration and to eliminate or reduce its amplitude in the APS Facility. To accomplish this it is necessary to know the time of occurrence and then, to utilize triangulation methods to identify the location of the source. It its time sequence is known, it may be possible to correlate it with the operation of some equipment at or near the site. Therefore, a major effort was made to obtain the time sequence and is the basis of this note.

Current state-of-the-art inorganic oxide membranes offer the potential of being modified to yield catalytic properties. The resulting modules may be configured to simultaneously induce catalytic reactions with product concentration and separation in a single processing step. Processes utilizing such catalytically active membrane reactors have the potential for dramatically increasing yield reactions which are currently limited by either thermodynamic equilibria, product inhibition, or kinetic selectivity. Examples of commercial interest include hydrogenation, dehydrogenation, partial and selective oxidation, hydrations, hydrocarbon cracking, olefin metathesis, hydroformylation, and olefin polymerization. A large portion of the most significant reactions fall into the category of high temperature, gas phase chemical and petrochemical processes. Microporous oxide membranes are well suited for these applications. A program is proposed to investigate selected model reactions of commercial interest (i.e. dehydrogenation of ethylbenzene to styrene and dehydrogenation of butane to butadiene) using a high temperature catalytic membrane reactor. Membranes will be developed, reaction dynamics characterized, and production processes developed, culminating in laboratory-scale demonstration of technical and economic feasibility. As a result, the anticipated increased yield per reactor pass economic incentives are envisioned. First, a large decrease in the temperature required to obtain high yield should be possible because of the reduced driving force …

During the last twelve months, research has concentrated on barrier- function methods for linear programming (LP) and quadratic programming (QP). Some ground-work for the application of barrier methods to nonlinearly constrained problems has also begun. In our previous progress report we drew attention to the difficulty of developing robust implementations of barrier methods for LP. We have continued to refine both the primal algorithm and the dual algorithm. We still do not claim that the barrier algorithms are as robust as the simplex method; however, the dual algorithm has solved all the problems in our extensive test set. We have also gained some experience with using the algorithms to solve aircrew scheduling problems.

This synopsis describes a new concept for integrated pollutant control: a cross-flow filter comprised of layered, gas permeable membranes that act as a particulate filter, an SO{sub 2} sorbent, and a NO{sub x} reduction catalyst.

We describe the use of the Sun Remote Procedure Call and Unix socket interprocess communication mechanisms to provide the network transport for a distributed, client-server based, image handling system. Clients run under Unix or UNICOS and servers run under Unix or MS-DOS. The use of remote procedure calls across local or wide-area networks to make video movies is addressed.

This issue of PETC Review contains short discussion on the following topics: (1) SO{sub 2} Control and Duct Injection: A Solution to Acid Rain''--research on duct injection; (2) Acid Rain Abatement and Advanced Coal Cleaning: A Precombustion Option''--research on selective agglomeration and advanced froth flotation; (3) Two-Stage Liquefaction of Coal''--PETC's efforts to further the viability of this technology; (4) Clean Coal Technology: Energy and the Environment''--the Clean Coal Technology Program is demonstrating technologies that show coal can be both efficient and environmentally acceptable. Supplemental sections on events, special focuses, calendars, publication lists, etc. are also included.

This three-year research project at Combustion Engineering, Inc. (CE), will assess the potential economic and environmental benefits derived from coal beneficiation by various advanced cleaning processes. The objectives of this program include the development of a detailed generic engineering data base, comprised of fuel combustion and ash performance data on beneficiated coal-based fuels (BCFs), which is needed to permit broad application. This technical data base will provide detailed information on fundamental fuel properties influencing combustion and mineral matter behavior as well as quantitative performance data on combustion, ash deposition, ash erosion, particulate collection, and gaseous and particulate emissions. Program objectives also address the application of this technical data base to predict performance impacts associated with firing BCFs in various commercial boiler designs as well as assessment of the economic implications of BCF utilization. Additionally, demonstration of this technology, with respect to large-scale fuel preparation, firing equipment operation, fuel performance, environmental impacts, and verification of prediction methodology, will be provided during field testing.

This chapter describes the biological and physical fish culture requirements of the hatchery system from which the concepts for the design are formulated. It includes a discussion of the program goals for fish production in the Yakima Basin followed by a brief summary of selected sites. The biological criteria are presented for the water system, adult holding, incubation, rearing, and finally transportation and release. The biological criteria address the water and space requirements, the number and type of vessels, and the related support requirements. To be assured that the components of the system meet all program demands, each life phase from adult capture to the juvenile or smolt transfer into the acclimation sites is analyzed.

Two novel regenerated solvent extraction processes are examined. The first process has the potential to reduce the energy costs inherent in the recovery of low-volatility carboxylic acids from dilute aqueous solutions. The second process has the potential for reducing the energy costs required for separate recovery of ammonia and acid gases (e.g. CO{sub 2} and H{sub 2}S) from industrial sour waters. The recovery of carboxylic acids from dilute aqueous solution can be achieved by extraction with tertiary amines. An approach for regeneration and product recovery from such extracts is to back-extract the carboxylic acid with a water-soluble, volatile tertiary amine, such as trimethylamine. The resulting trimethylammonium carboxylate solution can be concentrated and thermally decomposed, yielding the product acid and the volatile amine for recycle. Experimental work was performed with lactic acid, SUCCiOlC acid, and fumaric acid. Equilibrium data show near-stoichiometric recovery of the carboxylic acids from an organic solution of Alamine 336 into aqueous solutions of trimethylamine. For fumaric and succinic acids, partial evaporation of the aqueous back extract decomposes the carboxylate and yields the acid product in crystalline form. The decomposition of aqueous solutions of trimethylammonium lactates was not carried out to completion, due to the high water solubility …

A study by NEA completed in April 1987 shows that a large scale (500 MW) geothermal development on the big island of Hawaii and the inter-island power transmission cable is economically infeasible. This updated report, utilizing additional information available since 1987, reaches the same conclusion: (1) The state estimate of $1.7 billion for development cost of the geothermal project is low and extremely optimistic. more realistic development costs are shown to be in the range of $3.4 to $4.3 billion and could go as high as $4.6 billion. (2) Compared to alternative sources of power generation, geothermal can be 1.7 to 2.4 times as costly as oil, and 1.2 to 1.7 times as costly as a solar/oil generating system. (3) yearly operation and maintenance costs for the large scale geothermal project are estimated to be 44.7 million, 72% greater than a solar/oil generating system. (4) Over a 40-year period ratepayers could pay, on average, between 1.3 (17.2%) and 2.4 cents (33%) per kWh per year more for electricity produced by geothermal than they are currently paying (even with oil prices stabilizing at $45 per barrel in 2010). (5) A comparable solar/oil thermal energy development project is technologically feasible, could be …

Two novel regenerated solvent extraction processes are examined. The first process has the potential to reduce the energy costs inherent in the recovery of low-volatility carboxylic acids from dilute aqueous solutions. The second process has the potential for reducing the energy costs required for separate recovery of ammonia and acid gases (e.g. CO{sub 2} and H{sub 2}S) from industrial sour waters. The recovery of carboxylic acids from dilute aqueous solution can be achieved by extraction with tertiary amines. An approach for regeneration and product recovery from such extracts is to back-extract the carboxylic acid with a water-soluble, volatile tertiary amine, such as trimethylamine. The resulting trimethylammonium carboxylate solution can be concentrated and thermally decomposed, yielding the product acid and the volatile amine for recycle. Experimental work was performed with lactic acid, succinic acid, and fumaric acid. Equilibrium data show near-stoichiometric recovery of the carboxylic acids from an organic solution of Alamine 336 into aqueous solutions of trimethylamine. For fumaric and succinic acids, partial evaporation of the aqueous back extract decomposes the carboxylate and yields the acid product in crystalline form. The decomposition of aqueous solutions of trimethylammonium lactates was not carried out to completion, due to the high water solubility …

From May 1988 to January 1990 the Bureau of Reclamation, under an interagency agreement with the Bonneville Power Administration, conducted the water supply analysis required by Task II of the Northwest Power Planning Council's (Council) approval of predesign work on the Yakima/Klickitat Production Project. The purposes of the analysis were to (1) document the adequacy of water supplies (quantity and quality) for the proposed artificial production facilities, and for anadromous fish spawning, incubation, rearing, and migration in the Yakima and Klickitat Rivers and their tributaries; (2) determine the availability and quality of existing anadromous fish habitat in both basins; (3) document existing constraints to achieving anadromous fish production potentials in both basins; and (4) develop a listing of streams in both basins where existing water supplies, access, and habitat are adequate for anadromous fish production; where water supplies, access, and habitat would be adequate if improvements were made and agreements reached with existing water users; and where existing water supplies, access, and habitat are inadequate or unattainable in the near term (<lo years). The results of the water supply analysis will be reviewed by project managers and a technical work group, and recommendations will be made to the Council for …

We evaluated the effectiveness of new screening facilities at the Toppenish Creek, Wapato, and Sunnyside canals in southcentral Washington State. Screen integrity tests indicated that fish released in front of the screens were prevented from entering the canal behind the screens. Screen efficiency estimates are 99% ({+-}0.6%) for Toppenish Creek, 99% ({+-}0.3%) for Wapato, and 98% ({+-}0.5%) for Sunnyside. During 1987 at the Wapato Canal, we estimated screen efficiency was 97% ({+-}l%). We conducted descaling tests at the Toppenish Creek Screens. We estimated that 0.2% of steelhead Qncorhynchus mykiss smelts released during tests were descaled. None of the fish released through the fish return pipe were descaled. We measured the time required for fish to move through the screen facilities. The time required for 50% of the test fish to exit the Toppenish Creek Screen forebay was 4 to 9 h for rainbow trout fry and up to 39 h for steelhead smelts. The time for 50% of the test fish to exit the Wapato and Sunnyside screen forebays was less than 8 h. As with past studies, exit times varied with canal flow and species. After 39 h at Toppenish Creek, half the steelhead smelts were still in the …

A master plan for the Yakima/Klickitat Production Project (YKPP) was developed by the Northwest Power Planning Council (Council) on October 15, 1987, as a reasonable basis upon which the Bonneville Power Administration (BPA) could proceed to fund predesign work on the project. The Council approved the predesign work on the condition that eight preliminary tasks were completed. These tasks are: Agreement on a refined statement of project goals. Completion of a technical analysis of water supplies. Completion of an experimental design plan. Development of a harvest management plan. Assessment of potential genetic risks. Project coordination with all other affected parties. Submission of a preliminary design report to the Council. Develop a project management structure. The preliminary design report summarizes the work completed on these tasks. It provides a description of the preliminary design, engineering, and construction phases of project development, and gives an estimate of project costs. Also included is a description of other studies that were conducted to support YKPP planning. The results of studies conducted during the last 30 months indicate that hatchery facilities can be built in the Yakima and Klickitat subbasins to provide harvest benefits and to supplement natural production. Planning for the Yakima subbasin is …

The Umatilla habitat improvement program targets the improvement of water quality and the restoration of riparian areas, spawning and rearing habitat of steelhead, spring and fall chinook and coho salmon. The channelization of Meacham Creek by the Union Pacific Railroad combined with poor riparian livestock management created extreme channel instability and bedload movement within the project area. The resulting loss of riparian vegetation caused an increase in water temperatures, evaporative losses and sediment loading from upland sites. Four leases and nine right-of-way agreements were procured for the restoration of 2 miles of stream channel on Meacham Creek and lower Boston Canyon Creek. Treatments included: sloping of gravel deposits to reduce channel braiding and develop a more stable channel configuration, placement of rock and wood structures to reduce erosion of stream banks and encourage the deposition of fines for the establishment of riparian vegetation, placement of instream boulders, weirs and large organic debris to increase holding and hiding cover and to encourage the development of a stable thalweg, and the enhancement of riparian vegetation through planting of hardwood cuttings and grass and forb seeds. Baseline data on stream flows, water temperature and suspended sediments, and channel morphology was collected.

Monte Carlo calculations of hadron and muon shielding for SSC are reviewed with emphasis on their application to radiation safety and environmental protection. Models and algorithms for simulation of hadronic and electromagnetic showers, and for production and transport of muons in the TeV regime are briefly discussed. Capabilities and limitations of these calculations are described and illustrated with a few examples. 12 refs., 3 figs.

The SSCTRK numerical simulation code has been used to estimate the benefit of increasing the SSC dipole aperture from 4 to 5 cm. The increase in maximum amplitude of stable betatron oscillations depends on the level to which systematic errors have been corrected. Two cases have been studied, a highly corrected ring and a ring with limited corrections. The maximum stable amplitude increase is approximately a factor of the ring with limited systematic corrections. The aperture comparison has been made at 10{sup 5} revolutions. Magnetic error assumptions are described in detail and a new table of errors suggested for future simulations is given. 8 figs., 6 tabs.

Motion studies of the General Purpose Heat Source Module, GPHS, were conducted in the heat pulse interval associated with entries from earth gravity assist trajectories. The APL six-degree-of-freedom reentry program designated TMAGRA6C was used. The objectives of the studies were to (1) determine the effect of ablation on GPHS motion, and (2) determine whether the GPHS module entering the earth's atmosphere from an earth-gravity-assist trajectory has a preferred orientation during the heat pulse phase of reentry. The results are given in summary form for easy visualization of the initial conditions investigated and to provide a quick-look of the resulting motion. Detail of the motion is also given for the parameters of interest for each case studied. Selected values of initial pitch rate, roll rate, and combinations of these within the range 0[degree] to 1000[degrees]/sec were investigated for initial reentry angles of -7[degrees] (shallow) and -90[degrees] (steep) and initial angles of attack of 0[degree] (broadface to the wind) and 90[degrees]. Although the studies are not exhaustive, a sufficient number of reentry conditions (initial altitude, reentry angle, angle of attack, rotational motion) have been investigated to deduce certain trends. The results also provide information on additional reentry conditions that need to be …

With the successful demonstration of the Co-Processing Process for simultaneously converting and upgrading Ohio coal and Cold Lake atmospheric resid, a hydrotreating program was subcontracted out to Sun Refining and Marketing by Ohio Clean Fuels to define operating conditions that will produce a distillate product meeting 0.05 wt % sulfur and a naphtha product with 1 wppm nitrogen maximum. Two hydrotreating runs were carried out: one on a 350/650{degree}F distillate blend and other on the C5/350{degree}F co-pro naphtha. Both runs scoped process conditions by varying temperature, pressure and space velocity while maintaining hydrogen treat gas rate constant at 1,000 SCF/Barrel. Each run took about 30 days to complete and consisted of a test matrix of 8 conditions and a referee'' condition at the beginning and the end of the run, and as well, several other optimal conditions to define further information. While catalyst life test were originally planned, they were not carried out due to lack of funds. The tests identified hydrotreating conditions that can effectively reduce distillate blend sulfur from 0.55 wt % to as low as 0.15 wt % sulfur. The co-pro naphtha was denitrogenated from 46 wppm to below 1 wppm with mild hydrotreating conditions. There were …

The Western Area Power Administration (Western) proposes to construct, operate, and maintain a new Kiowa Creek Switching Station near Orchard in Morgan County, Colorado. Kiowa Creek Switching Station would consist of a fenced area of approximately 300 by 300 feet and contain various electrical equipment typical for a switching station. As part of this new construction, approximately one mile of an existing 115-kilovolt (kV) transmission line will be removed and replaced with a double circuit overhead line. The project will also include a short (one-third mile) realignment of an existing line to permit connection with the new switching station. In accordance with the Council on Environmental Quality (CEQ) regulations for implementing the procedural provisions of the National Environmental Policy Act of 1969 (NEPA), 40 CFR Parts 1500--1508, the Department of Energy (DOE) has determined that an environmental impact statement (EIS) is not required for the proposed project. This determination is based on the information contained in this environmental assessment (EA) prepared by Western. The EA identifies and evaluates the environmental and socioeconomic effects of the proposed action, and concludes that the advance impacts on the human environment resulting from the proposed project would not be significant. 8 refs., 3 figs., …

This report discusses the Mark II detector, comments on precision Z mass measurements; and the search for new particles. (LSP)

The present regulatory climate in the research reactor community has made an easily manageable and auditable maintenance system a necessity. We at NRAD have developed a computer-based system that is easy to implement and use, meets all our regulatory and reporting requirements, and is extremely useful to us in our daily operations. The system, developed at the NRAD reactor facility at Argonne National Laboratory in Idaho Falls, Idaho, uses DBASE-III coupled with C language routines, written for specific purposes. It is a menu-driven system that can be mastered in a short period of time and maintained with only a few hours of computer operation per month. It uses three computer processes: job scheduling, file updating, and report preparation, to produce schedules, work orders, and miscellaneous report forms. The heart of the system is an IBM PC with a 10 MB hard disk, providing adequate data storage capacity for a facility the size of NRAD. The computer is totally dedicated to the maintenance system, thus guarding against inadvertent loss of, or damage to, data files. Computer operator training time is minimized by the menu driven program. Multiple operators can share the computer operation responsibilities, and maintain the system with only 12 …

This appendix contains raw data used in the fault slip analysis. Data was collected from four sites, sites A through D. Minor fault slip measurements are listed for each site, and each row of data is one measurement. The index number is an arbitrary sequential number. Strike is the strike of the fault plane, measured in the northern hemisphere. Dip is the dip of the fault plane, which has two letters attached to the end showing the quadrant of the dip direction. Rake is the rake of the slickenside in the plane of the fault, which has two letters attached to the end showing the quadrant of the plunge direction of the rake. Sense is the sense of slip of the fault: N = normal (rake > 45{degree}), R = reverse (rake > 45{degree}), D = dextral (rake < 45{degree}), S = sinistral (rake < 45{degree}). 37 figs., 19 tabs.