Seal Pump Outs (PO) are provided by specifically designing and providing redundant, or double, seals to create an annular volume that can be '(vacuum) pumped out' to test the integrity of both seals. The value of the technique is most readily apparent in the construction of large piping systems or vessels whose closure is on a different schedule than the nozzle closures, or whose nozzles are serially closed. In the case of D0, for instance, the high voltage boxes were put in place and leak checked before the vessel was closed and independent of the other nozzles. PO use is by no means limited to cryogenics and the supporting vacuum systems, but the discussion here will be limited to cryogenic applications. POs come in two generic service types; installation, and installation and monitor. The above high voltage box is an example of a static installation service application. Once the item is installed the PO can be, and almost universally is, capped, and revisited only on disassembly and reassembly. POs are constantly monitored after installation only when their seals, through cooldown gradient induced motion, vibration, cyclic load bolt seating, or other dynamic phenomena may degrade in performance over time. PO seals …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

This report summarizes the results of the traveler's participation in the International Energy Agency (IEA) Network planning meeting for Biotechnology for the Conversion of Lignocellulosics,'' held at the Institut Francais du Petrole (IFP), Rueil-Malmaison, France. It also summarizes the results of discussions held at Aston University, Birmingham, UK, with Dr. Martin Beevers with whom the traveler is attempting to initiate a collaborative research project that will be beneficial to ongoing research programs at Oak Ridge National Laboratory (ORNL). The itinerary for the trip is given in Appendix A; the names of the people contacted are listed in Appendix B. Also, pertinent information about the Institut Francais du Petrole is attached (Appendix C). 1 tab.

No Abstract. There are two duplicate copies. One is in the FSC-ESD files.

Estimates of the localizability of electron-cyclotron heating power are made for the Compact Ignition Tokamak. A particular heating scenario is examined, namely, the fundamental O-mode, injected nearly perpendicular to the toroidal magnetic field. The absorption depth due to finite T{sub e} is very small, about 1 cm, near the q = 2 surface. Absorption is even better localized near q = 1. Several issues that might lead to degraded localizability are reviewed. Use of an intense, pulsed microwave source is the only issue with a possibly significant impact. 3 refs.

We are carrying out an integrated program of laboratory experiments, kinetics modeling, and basin thermal history modeling in order to better understand the natural breakdown of organic matter into oil and gas. Our kinetic models of organic maturation are being used to better understand the coupling of generation, cracking, expulsion, and overpressuring in both the laboratory and geologic setting. Currently we are carrying out chemical experiments and developing more efficient chemical kinetic modeling schemes to obtain a better understanding of expulsion and cracking from lean source rocks and from hydrogen-poor (terrestrial) organic source material. We verify the chemical kinetic models by integrating them with thermal history models of hydrocarbon-producing sediments and comparing predicted and observed characteristics of the hydrocarbon occurrence in a variety of settings. We intend to apply this approach to evaluate the potential for deep gas resources in the Pacific Northwest and in the Louisiana Gulf Coast. 11 refs., 4 figs.

We report on a series of holographic shots using explosives to generate ejecta from lead. These experiments covered a range of geometries including point initiation and plane wave initiation for the H.E., and using a gas-fill in the cavity where the ejecta was produced. The final experiment, Rex-9 was a Fabry-Perot experiment at Site 300 which provided the velocity history of the lead surface for the purpose of normalizing the code being used to calculate the position of the lead surface in these experiments. The focus of this report is on the experimental technique rather than on the size measurements. We want to insure that the advances in mechanical design and experimental technique that were made during these experiments are preserved in future experiments. 8 figs., 2 tabs.

The linac upgrade project at Fermilab will replace the last 4 drift-tube linac tanks with seven side coupled cavity strings. This will increase the beam energy from 200 to 400 MeV at injection into the Booster accelerator. The main objective of the temperature loop is to control the resonant frequency of the cavity strings. A cavity string will constant of 4 sections connected with bridge couplers driven with a 12 MW klystron at 805 MHz. Each section is a side coupled cavity chain consisting of 16 accelerating cells and 15 side coupling cells. For the linac upgrade, 7 full cavity strings will be used. A separate temperature control system is planned for each of the 28 accelerating sections, the two transition sections, and the debuncher section. The cavity strings will be tuned to resonance for full power beam loaded conditions. A separate frequency loop is planned that will sample the phase difference between a monitor placed in the end cell of each section and the rf drive. The frequency loop will control the set point for the temperature loop which will be able to maintain the resonant frequency through periods within beam or rf power. The frequency loop will need …

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Applicability of the Charitable Raffle Enabling Act, article 179f, V. T. C. S., to a nonprofit corporation whose purpose is to oppose construction of a landfill (RQ-1962)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether certain personnel at Dallas Love Field should be designated as "airport police officers" or "airport security officers."

The Winter Fuels Report is intended to provide concise, timely information to the industry, the press, policymakers, consumers, analysts, and state and local governments on the following topics: distillate fuel oil net production, imports and stocks for all PADD's and product supplied on the US level; propane net production, imports and stocks for Petroleum Administration for Defense Districts (PADD) I, II, and III; natural gas supply and disposition and underground storage for the United States and consumption for all PADD's; residential and wholesale pricing data for propane and heating oil for those states participating in the joint Energy Information Administration (EIA)/State Heating Oil and Propane Program; crude oil and petroleum price comparisons for the United States and selected cities; and US total heating degree-days by city. This report will be published weekly by the EIA starting the first week in October 1990 and will continue until the first week in April 1991. The data will also be available electronically after 5:00 pm on Thursday during the heating season through the EIA Electronic Publication System (EPUB).

The traveler serving as Delegate from the United States, Center for the Analysis and Dissemination of Demonstrated Energy, (CADDET) National Team, participated in the activities of the annual International Energy Agency, CADDET Working Team meeting. Highlights of this meeting included progress/status presentations by 12 to 13 CADDET National Teams, development of future CADDET work plans including a prioritization of activities, and discussions of long range expectations for CADDET. Follow-up discussions were held with CADDET staff members which focused on US CADDET National Team contributions to the CADDET newsletter, brochures and register of demonstrated energy technologies.

The relief valve and relief piping capacity was calculated to be 908 sefm air. This exceeds all relieving conditions. The vessel also has a rupture disc with a 2640 scfm air stamped capacity. In order to significantly decrease the amount of time required to fill the cryostats, it is desired to raise the setpoint of the 'operating' relief valve on the argon storage dewar to 20 psig from its existing 16 psig setting. This additional pressure increases the flow to the cryostats and will overwhelm the relief capacity if the temperature of the modules within these vessels is warm enough. Using some conservative assumptions and simple calculations within this note, the maximum average temperature that the modules within each cryostat can be at prior to filling from the storage dewar with liquid argon is at least 290 K. The average temperature of the module mass for any of the three cryostats can be as high as 290 K prior to filling that particular cryostat. This should not be confused with the average temperature of a single type or location which is useful in protecting the modules-not necessarily the vessel itself. A few modules of each type and at different elevations …

the travelers attended the Fifth International Congress of Ecology (INTECOL) in Yokohama, Japan, and two presented invited papers and chaired symposia. One traveler also attended the OJI International Seminar in Gifu, Japan and the Fukuoka Symposium on Theoretical Ecology in Fukuoka, Japan and presented invited papers. At these scientific gatherings, a large number of symposia and specific presentations were relevant to current research at Oak Ridge National Laboratory (ORNL), especially in the areas of landscape dynamics, plant physiology, and aquatic ecosystems.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Travel to the Forschungszentrum (KFA) -- Juelich described in this report was for the purpose of participating in the annual meeting of subprogram managers for the US/DOE Umbrella Agreement for Fuel, Fission Product, and Graphite Technology. At this meeting the highlights of the cooperative exchange were reviewed for the time period June 1989 through June 1990. The program continues to contribute technology in an effective way for both countries. Revision 15 of the Subprogram Plan will be issued as a result of the meeting. There was interest expressed by KFA management in the level of support received from the NPR program and in potential participation in the COMEDIE loop experiment being conducted at the CEA.

We use a newly developed real-space multiple scattering theory (RS-MST) to calculate low-energy electron diffraction (LEED) intensities from stepped surfaces. In this calculation the electron wavefunctions are expanded in terms of an angular momentum basis, utilizing the property of removal invariance of systems with semi-infinite periodicity. This strongly reduces the dependence of the calculation on the interlayer spacing and thus opens up the possibility of treating more open surfaces. This includes in particular stepped surfaces, to which conventional methods cannot be applied. Applications of the formalism to various stepped surfaces are presented. In particular, the results for Cu(311) and (331) surfaces obtained from both the layer doubling and RS-MST methods are compared. In addition, numerical techniques which can improve the convergence as well as the speed of the RS-MST approach are discussed. 6 refs., 3 figs.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Exemption of lessees of the General Land Office from the permitting requirements for removal of sand, shell, gravel, or marl within state tidewater limits (RQ-1910)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether section 2(g) of article 6252-17, V. T. C. S., authorizes the school principal and school district superintendent to require a teacher's grievance to be heard in executive session (RQ- 2027)

Thermal analysis of a pin from the FSP-1 fuels irradiation test has been completed. The purpose of the analysis was to provide predictions of fuel pin temperatures, determine the flow regime within the lithium annulus of the test assembly, and provide a standardized model for a consistent basis of comparison between pins within the test assembly. The calculations have predicted that the pin is operating at slightly above the test design temperatures and that the flow regime within the lithium annulus is a laminar buoyancy driven flow. 7 refs., 5 figs.

The objective of this memorandum is to summarize results of previous sediment studies on Tims Branch and Steed's Pond conducted by Health Protection (HP) and by the Savannah River Laboratory (SRL) in conjunction with Reactor Materials Engineering Technology (RMET). The results for other heavy metals, such as lead, nickel, copper, mercury, chromium, cadmium, zinc, and thorium are also summarized.

The objective of this memorandum is to summarize results of previous sediment studies on Tims Branch and Steed`s Pond conducted by Health Protection (HP) and by the Savannah River Laboratory (SRL) in conjunction with Reactor Materials Engineering & Technology (RMET). The results for other heavy metals, such as lead, nickel, copper, mercury, chromium, cadmium, zinc, and thorium are also summarized.

Fifty specified lines of {sup 127}I{sub 2} were studied by Doppler-free frequency modulation spectroscopy. For each line the classification of the molecular transition was determined, hyperfine components were identified, and one well-resolved component was selected for precise determination of its absolute frequency. In 3 cases, a nearby alternate line was selected for measurement because no well-resolved component was found for the specified line. Absolute frequency determinations were made with an estimated uncertainty of 1.1 MHz by locking a dye laser to the selected hyperfine component and measuring its wave number with a high-precision Fabry-Perot wavemeter. For each line results of the absolute measurement, the line classification, and a Doppler-free spectrum are given.