If the 500 MW geothermal project on the Big Island of Hawaii is developed as planned, the Wao Kele O Puna rain forest will be severely damaged or destroyed. If this happens the State will lose one of its most precious resources. It would be tragic for this to happen, since on a least-cost basis, the geothermal project does not make economic sense. Improving energy efficiency in the commercial and residential sectors of Hawaii can save about 500 MW of power at a cost of $700 million.

The traveler organized and chaired the meeting of the NEANDC/NEACRP Nuclear Data Evaluation Cooperation Subgroup-I: Intercomparison of USA, European, and Japanese Evaluations for {sup 52}Cr, {sup 56}Fe, and {sup 58}Ni, held on December 3, 1990, at the NEA Data Bank in Saclay, France. The traveler held discussions with Subgroup-II members to keep track of the activities of this group in which the traveler is a member. Highlights and/or recommendations of these meetings, as well as observations of the EAF, EFF, and JEF meetings, are included in this report.

A designed experiment was performed on the staking operation of a miniature precision bearing. Three variables were controlled during the experiment: staking force, tool diameter, and bearing-to-wheel fit. The study showed that the current staking tool diameter is highly sensitive to staking force and to bearing-to-wheel fit, whereas a smaller diameter tool is not. The study also shows that, with the current process, bearing movement under a 100-Newton (N) force can be estimated at 0.009 in. to 0.0029 in. The current specification is 0.002 in. and should be revised to 0.0035 in. 4 figs.

This report presents current data on production, consumption, stocks, imports, exports, and prices of the principal energy commodities in the United States. Also included are data on international production of crude oil, consumption of petroleum products, petroleum stocks, and production of electricity from nuclear-powered facilities.

Electric utilities are on the brink of a new era in waste disposal problems. This research project addresses the issue of how to effectively dispose of flyash, bottom ash, desulfurization sludge through the generation of chemically-hardened material that could potentially be used as a cement or as a synthetic aggregate. The specific goals of this study were: (1) to study the hardness of mixtures of flyash, bottom ash, and DSG treated with lime and other hardening agents; (2) to determine the optimum solids content, setting time, moisture content, and post setting treatments that will yield the greatest strength and hardness out of these mixtures; and (3) to determine the leachability of the synthetic material as a measure of its ability to retain absorbed and/or entrained toxic metals. 50 refs., 15 figs., 8 tabs.

The characterization of diffusion of lead and other trace elements in certain mineral phases has great significance in reconstructing the thermal history of the earth's crust. Such studies permit better interpretation of ages'' obtained from isotopic dating. This study uses ion implantation to introduce lead into the minerals apatite and zircon. Diffusion profiles are obtained using Rutherford backscattering (RBS) and the results fit with a model to determine D. Results for apatite over the temperature range 600--900{degree}C show agreement with earlier results obtained traditional geologic techniques. This suggests that radiation damage induced by ion implantation has little effect on diffusion in this case. This approach is both simple and useful in studying diffusion over a temperature range of geologic interest without inordinate annealing times. 17 refs., 5 figs.

The reactive o-quinodimethanes, 1,2-dimethylene-1,2-dihydronaphthalene (9) and o-xylylene (1) were observed by flow {sup 1}H NMR spectroscopy at room temperature. The {sup 1}H NMR spectrum of 9 was obtained in the absence of precursor and dimers. However, the {sup 1}H NMR spectrum of the more reactive 1, generated in a similar manner from (o-((trimethylsilyl)methyl)benzyl)trimethylammonium iodide (5.) could be obtained only in the presence of its stable (4 + 2) and (4 + 4) dimers. The dimerization kinetics of 3-methyl- (5{prime}), 3,6-dimethyl- (11), 3-isopropyl- (12), and 3,6-diisoproply-1,2-xylylene (13) in acetonitrile (CH{sub 3}CN) were studied by stopped-flow UV-visible spectroscopy. Fluoride ion induced 1,2-elimination from 2-elimination from 2-trimethylsilylbenzocyclobutenyl-1 mesylate (26) was used to generate the reactive molecule benzocyclobutadiene (1{prime}) in CD{sub 3}CN, which was observed by flow {sup 1}H NMR spectroscopy at room temperature. The {sup 1}H NMR spectrum (in CD{sub 3}CN) of 1,2-dimethylene-1,2-dihydrothiophene (1{double prime}), obtained by fluoride ion induced 1,4-elimination from 3-(trimethylammoniummethyl)-2-(trimethylsilylmethyl)thiophene iodine was observed by flow {sup 1}H NMR spectroscopy at room temperature. The dimerization rate of 1{double prime} in CH{sub 3}CN, generated in the same manner, was measured by UV-visible spectroscopy. 166 refs., 7 figs., 7 tabs.

The electrocatalytic activities were compared for pure and chloride-doped beta-PbO{sub 2} (Cl-PbO{sub 2}) films on gold and platinum substrates. Rate constants were increased significantly for oxidations of Mn{sup 2+}, toluene, benzyl alcohol, dimethylsulphoxide (DMSO) and benzaldehyde in acidic media by the incorporation of Cl{sup {minus}} into the oxide films. These reactions are concluded to occur by the electrocatalytic transfer of oxygen from H{sub 2}O to the reaction products. Results of x-ray diffraction studies indicate the Cl-PbO{sub 2} film continues to have the slightly distorted rutile structure of pure beta-PbO{sub 2}. The observed electrocatalytic phenomena are concluded to be the beneficial consequence of surface defects generated when Cl{sup {minus}} serves for charge compensation within the surface matrix and, thereby, increases the number of surface sites capable of adsorbing hydroxyl radicals which are transferred in the electrocatalytic O-transfer reactions. 91 refs., 44 figs., 10 tabs.

Measurements of the normal state magnetic susceptibility {chi}(T) of YBa{sub 2}Cu{sub 3}O{sub 7}, Bi{sub 1.8}Pb{sub 0.2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}}, and Bi{sub 2{minus}x}Pb{sub x}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10+{delta}} (x = 0.2 and 0.25) were carried out. All {chi}(T) data show negative curvature below {approximately}2{Tc}. The data for YBa{sub 2}Cu{sub 3}O{sub 7} are in excellent agreement with a new calculation of the superconducting fluctuation diamagnetism. From the analysis, we infer s-wave pairing and microscopic parameters are obtained. For {chi}(T) of YBa{sub 2}Cu{sub 3}O{sub 7}, part of the negative curvature is inferred to arise from the normal state background. We find a strong temperature dependent anisotropy {delta}{chi} {equivalent to} {chi}{sub c} {minus} {chi}{sub ab} and estimate the normal state spin contributions to {chi}(T). The heat capacity C(T) of YBa{sub 2}Cu{sub 3}O{sub 7} is reported for 0.4 K < T < 400 K in zero and 70 kG magnetic fields. In addition to the feature associated with the onset of the superconductivity at {Tc}, two anomalies in C(T) were observed near 74 K and 330 K, with another possible anomaly near 102 K; the temperatures at which they occur correlate with anomalies in {chi}(T) and ultransonic measurements. The occurrence of the anomaly at {approx …

The purpose of this investigation is to study the mechanisms of sulfur capture when burning coal-water-limestone mixtures (CWLM) in fluidized beds. Special care is taken to make comparisons with to dry coal and sorbent under comparable experimental conditions. A series of experiments were performed in an eight-inch diameter bubbling fluidized bed combustor to address this problem. 33 refs., 17 figs., 5 tabs.

The first part of this thesis will search for the thermal isomerization of olefins to carbenes which is predicted to be a high energy process by calculations and has only been observed in a few strained olefins. The possibility of thermal isomerization of simple olefins to carbenes will be explored. Substitution of a silyl group on the double bond of an olefin allows a potential intermediate which has a {beta}-radical to the silyl group during the cis-trans isomerization. The effects of a trimethylsilyl group on this isomerization are the subject of this study. The second part of this thesis will include the generation and chemistry of intermediates containing a silicon-nitrogen double bond. The isomerization of parent silanimine to the aminosilylene was calculated to be a high energy process. New approaches to the silicon-nitrogen double bond will also be presented. 92 refs., 12 figs., 11 tabs.

The precipitation of jarosite compounds to remove Na, K, Fe, and SO{sub 4}{sup 2{minus}} impurities from spent acid solutions from a chemical coal cleaning process was studied. Simple heating of model solutions containing Fe{sub 2}(SO{sub 4}){sub 3}, Na{sub 2}SO{sub 4}, and K{sub 2}SO{sub 4} caused jarosite (KFe{sub 3}(SO{sub 4}){sub 2}(OH){sub 6}) to form preferentially to natrojarosite (NaFe{sub 3}(SO{sub 4}){sub 2}(OH){sub 6}). Virtually all of the K, about 90% of the Fe, and about 30% of the SO{sub 4}{sup 2{minus}} could be precipitated from those solutions at 95{degree}C, while little or no Na was removed. However, simple heating of model solutions containing only Fe{sub 2}(SO{sub 4}){sub 3} and Na{sub 2}SO{sub 4} up to 95{degree}C for {le}12 hours produced low yields of jarosite compounds, and the Fe concentration in the solution had to be increased to avoid the formation of undesirable Fe compounds. Precipitate yields could be increased dramatically in model solutions of Na{sub 2}SO{sub 4}/Fe{sub 2}(SO{sub 4}){sub 3} containing excess Fe by using either CaCO{sub 3}, Ca(OH){sub 2}, or ZnO to neutralize H{sub 2}SO{sub 4} released during hydrolysis of the Fe{sub 2}(SO{sub 4}){sub 3} and during the precipitation reactions. Results obtained from the studies with model solutions were applied to spent …

HYLIFE is the name given to a family of self-healing liquid-wall reactor concepts for inertial confinement fusion. This HYLIFE-II concept employs the molten salt, Flibe, for the liquid jets instead of liquid lithium used in the original HYLIFE-I study. A preliminary conceptual design study of the heat transport system and the balance of plant of the HYLIFE-II fusion power plant is described in this paper with special emphasis on a scoping study to determine the best intermediate heat exchanger geometry and flow conditions for minimum cost of electricity. 11 refs., 8 figs.

As a continuation of the research on bcc Gd-Mg alloy system by Herchenroeder and Gschneidner, the metastable bcc Gd-Cd alloys were studied with the emphasis on their metallurgical and magnetic properties. An essentially single phase alloy could be retained for Cd concentrations from 15 at. % Cd to 19 at. % Cd, which is in the vicinity of the eutectoid composition of {beta}Gd in the Gd-Cd system. The lattice constants obtained for these alloys were used to determine the lattice constant of pure bcc Gd by extrapolation to 0 at. % Cd. Good agreement between this extrapolated value and that obtained from Gd-Mg alloys by using the same method suggested the validity of such extrapolation method. Thermal stability of these metastable bcc Gd-Cd alloys was examined by using differential thermal analysis (DTA).

A method for determining the location and possible existence of symmetry elements in Patterson superposition maps has been developed. A comparison of the original superposition map and a superposition map operated on by the symmetry element gives possible translations to the location of the symmetry element. A reciprocal space approach using structure factor-like quantities obtained from the Fourier transform of the superposition function is then used to determine the best'' location of the symmetry element. Constraints based upon the space group requirements are also used as a check on the locations. The locations of the symmetry elements are used to modify the Fourier transform coefficients of the superposition function to give an approximation of the structure factors, which are then refined using the EG relation. The analysis of several compounds using this method is presented. Reciprocal space techniques for locating multiple images in the superposition function are also presented, along with methods to remove the effect of multiple images in the Fourier transform coefficients of the superposition map. In addition, crystallographic studies of the extended chain structure of (NHC{sub 5}H{sub 5})SbI{sub 4} and of the twinning method of the orthorhombic form of the high-{Tc} superconductor YBa{sub 2}Cu{sub 3}O{sub 7-x} are …

The quenching and stability behavior of forced-flow helium-cooled, cable-in-conduit conductors (CICC) has been analyzed using a new computer program. This computer analysis code was developed for performing general, transient, thermal analyses on CICCs. The program includes the necessary details for the physical properties of all the constituent materials of such conductors, and accurately models the thermo- and fluid-dynamic behavior of the helium coolant starting from a wide range of initial conditions. It has been applied to a study of the stability and quench behavior of several large-scale conductor options being considered for use in the magnet systems of the International Thermonuclear Experimental Reactor (ITER), and the results will be reported here. 3 refs., 14 figs.

Resistivity measurements have been performed for electric characterization of the compounds Ba{sub 5}Sb{sub 3} and Ba{sub 5}Sb{sub 3}Cl, both with the Mn{sub 5}Si{sub 3} structure type, along with Ca{sub 5}Bi{sub 3} and Ca{sub 5}Bi{sub 3}F, both with the {beta}-Yb{sub 5}Sb{sub 3} structure type. These measurements were taken as a function of temperature using the four probe method on pressed polycrystalline pellets of the compounds. A sealed apparatus was developed for containing these air-sensitive compounds throughout the experiments. By a simple electron count, one extra electron in both Ba{sub 5}Sb{sub 3} and Ca{sub 5}Bi{sub 3} should occupy a conduction band, giving these compounds a metallic character. In the cases of Ba{sub 5}Sb{sub 3}Cl and Ca{sub 5}Bi{sub 3}F, the extra electron should bond to the halide, both filling the valence band and giving rise to semiconducting character. Ca{sub 5}Bi{sub 3}, Ca{sub 5}Bi{sub 3}F, and Ba{sub 5}Sb{sub 3}Cl were found to comply with the electron count prediction. Ba{sub 5}Sb{sub 3}, however, was found to be a semiconductor (E{sub g} = 0.30 eV) with a larger band gap than its corresponding chloride (E{sub g} = 0.09 eV).

An angle-resolved photoemission study of the normal and superconducting states in Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} was performed. Measurements in the normal state show bands dispersing through the Fermi level from at least 350 meV below E{sub F}. The Fermi level crossings are consistant with local-density band calculation, including a point calculated to be of Bi-O character. Additional measurements were made where bands crossed the Fermi level between 100 and 250K, along with measurements on an adjacent Pt foil. The Fermi edges of both materials agree to within the noise. Below the Fermi level, the spectra show correlation effects on the form of an increased effective mass. The shape of the spectra can be explained by a lifetime-broadened photohole and secondary electrons. The effective inverse photohole lifetime is linear in energy. A superconducting gap has been measured at a number of points where there is density at the Fermi level in the normal state. By proper modeling, a gap of 24 meV was obtained for all these points, including points of Cu-O and Bi-O character respectively, according to band calculation. The lack of gap anisotropy in the basal plane suggests that pinning in this material is not d-wave pairing.

There has been much recent interest in the photochemistry and photophysics of transition metal polypyridine complexes due to the possibility of their use in solar energy conversion systems. The excited state of these compounds are known to undergo useful electron transfer and energy transfer reactions. This work attempts to elucidate the mechanism of the quenching of *CrL{sub 3}{sup 3+} (where L = 2,2{prime}-bipyridine, 4,4{prime}-dimethyl-2,2{prime}-bipyridine, 1,10-phenanthroline, 5-chloro-1,10-phenanthroline, 5-methyl-1,10-phenanthroline) by oxalate ions in neutral pH. Evidence suggests an ion-pairing pre-equilibrium followed by rate limiting electron transfer to produce CrL{sub 3}{sup 2+} and CO{sub 2}{sup {minus}} can then react with ground state chromium(III) species to produce another mole of the reduced product or it can produce a secondary transient as in the case of phenanthroline and substituted phenanthroline complexes. The secondary transient reacts to produce CrL{sub 3}{sup 2+} in a subsequent reaction. 85 refs., 24 figs., 7 tabs.

Proton magnetic resonance spectroscopy, or nuclear magnetic resonance (NMR) of hydrogen, has been applied to investigate silica-supported Group VIII monometallic and Group VIII-Group IB bimetallic catalysts and alumina- and silica-supported platinum-rhenium bimetallic catalysts. Two adsorbed states of hydrogen, i.e., irreversible and reversible hydrogen, on the surfaces of monometallic Ru, Pt, and Cu particles and bimetallic Ru-Group Ib, Pt-Group Ib, and Pt-Re particles were observed directly via proton NMR. The same amounts of the irreversible hydrogen adsorbed on pure Ru catalysts were measured by both proton NMR and the volumetric technique. The electronic environments on surfaces of monometallic catalysts are sensitive to changes in metal dispersion, state of adsorbed hydrogen, and residual chlorine. Surface compositions for the Ru--Cu and Pt--Cu bimetallic catalysts were determined by NMR of adsorbed hydrogen. 297 refs., 96 figs., 19 tabs.

The electrocatalysis of oxygen-transfer reactions is discussed in two parts. In Part I, the reduction of iodate (IO{sub 3}{sup {minus}}) is examined as an example of cathodic oxygen transfer. On oxide-covered Pt electrodes (PtO), a large cathodic current is observed in the presence of IO{sub 3}{sup {minus}} to coincide with the reduction of PtO. The total cathodic charge exceeds the amount required for reduction of PtO and IO{sub 3}{sup {minus}} to produce an adsorbed product. An electrocatalytic link between reduction of IO{sub 3}{sup {minus}} and reduction of PtO is indicated. In addition, on oxide-free Pt electrodes, the reduction of IO{sub 3}{sup {minus}} is determined to be sensitive to surface treatment. The electrocatalytic oxidation of CN{sup {minus}} is presented as an example of anodic oxygen transfer in Part II. The voltametric response of CN{sup {minus}} is virtually nonexistent at PbO{sub 2} electrodes. The response is significantly improved by doping PbO{sub 2} with Cu. Cyanide is also oxidized effectively at CuO-film electrodes. Copper is concluded to serve as an adsorption site for CN{sup {minus}}. It is proposed that an oxygen tunneling mechanism comparable to electron tunneling does not occur at the electrode-solution interface. The adsorption of CN{sup {minus}} is therefore considered to …

It is generally expected that the depolarizing effects of the linear accelerator RF fields will be small. Recently Bill Atwood raised the question whether this conclusion is still correct in view of the fact that the particles in the SLC spend a larger fraction of their time at phase angles off crest'' due to BNS damping; since radial fields are in quadrature with the accelerating field this might imply that depolarizing effects are larger. On the other hand, because of the smaller emittance of the SLC relative to the earlier linac radial excursions would be smaller. The anticipation is therefore that the depolarizing effect will again be negligible but it might be worthwhile to update the early calculations of SLAC TN-63-97 revised in this paper.

The purpose of the DOE limestone injection multistage burner (LIMB) Demonstration Project Extension is to extend the data base on LIMB technology and to expand DOE's list of Clean Coal Technologies by demonstrating the Coolside process as part of the project. The main objectives of this project are: to demonstrate the general applicability of LIMB technology by testing 3 coals and 4 sorbents (total of 12 coal/sorbent combinations) at the Ohio Edison Edgewater plant; and to demonstrate that Coolside is a viable technology for improving precipitator performance and reducing sulfur dioxide emissions while acceptable operability is maintained. Progress is reported. 3 figs.

The Evaluation Cooperation Subgroup, Actinide Data in the Thermal Energy Range,'' met primarily to discuss problems related to the temperature coefficient of U-235 fueled thermal reactors and nuclear data on eta at thermal neutron energies, the number of neutrons emitted per neutron absorbed. The preliminary results of the eta measurements done by M. Moxon of Harwell at Oak Ridge were presented and preliminary results by H. Weigman of Geel with a new method were presented. All three measurements from Geel show a pronounced down-slope of eta with decreasing neutron energy and both measurements by Moxon show only a very slight down slope. Acceptance of the Geel results would solve about one-third of the problem in the calculated reactor temperature coefficient. The Evaluation Cooperation Subgroup, 239-Pu Fission Cross Sections between 1 and 100 keV,'' met to discuss the 4% lower than the previously evaluated fission cross sections between 20 eV and 100 keV as evaluated from the fission data of the Weston and Todd and transmission data of J. A. Harvey (all of ORNL). These lower fission cross sections are discrepant with integral measurements, however, it is conceivable that there could be compensating effects, perhaps in the U-238 cross sections. A …