The High Flux Beam Reactor (HFBR) operated by Brookhaven National Laboratory (BNL) employs forced downflow for heat removal during normal operation. In the event of total loss of forced flow, the reactor will shutdown and the flow reversal valves open. When the downward core flow becomes sufficiently small then the opposing thermal buoyancy induces flow reversal leading to decay heat removal by natural convection. There is some uncertainty as to whether the natural circulation is adequate for decay heat removal after 60 MW operation. BNL- staff carried out a series of calculations to establish the adequacy of flow reversal to remove decay heat. Their calculations are based on a natural convective CHF model. The primary purpose of the present calculations is to review the accuracy and applicability of Fauske`s CHF model for the HFBR, and the assumptions and methodology employed by BNL-staff to determine the heat removal limit in the HFBR during a flow reversal and natural convection situation.

This Preliminary Safety Analysis Report addresses site assessment, facility design and construction, and design operation of the processing systems in the Corrugated Metal Pipe Saw Facility with respect to normal and abnormal conditions. Potential hazards are identified, credible accidents relative to the operation of the facility and the process systems are analyzed, and the consequences of postulated accidents are presented. The risk associated with normal operations, abnormal operations, and natural phenomena are analyzed. The accident analysis presented shows that the impact of the facility will be acceptable for all foreseeable normal and abnormal conditions of operation. Specifically, under normal conditions the facility will have impacts within the limits posted by applicable DOE guidelines, and in accident conditions the facility will similarly meet or exceed the requirements of all applicable standards. 16 figs., 6 tabs.

DO (D Zero) is a large Liquid Argon (LAr) HEP Calorimeter designed to function in the laboratories P-Pbar collider at the DO section of the Tevatron accelerator. It contains 5,000 gls. of LAr in the CC cryostat, and 3,000 gls. in each of two, a north and south, EC cryostats. These low pressure vessels are filled with detector modules built of stainless steel, copper and depleted uranium. The LAr functions as the ionization medium, and the spatial and temporal of the collection of the charge of the electrons produced signals the passsage of charged particles. The collection of these charges in 4 pi is related to the energy of the particles, and their measurement is called calorimetry. The contained LAr (T=90K) is isolated from the ambient temperatures in specially designed, vacuum and superinsulated, vessels (cryostats) provided with liquid nitrogen, heat of vaporization, cooling.

Retrieval of 5-lb splits of -1/4 inch coal from designated 30-gallon drums was completed. Preparation and analysis of these samples for the second yearly quality evaluation is in progress. After consultation with the DOE Project Manager, two replacement samples were collected. These are the first of the series which will be stored in foil laminate bags. Both of these samples were placed in 30 gallon steel drums lined with polyethylene bags at the mine site. They were equipped with lid gaskets made from Tygon tubing, and 1/4 in. metal tubing fittings to purge and pressurize the drum with argon.

The objective of this project is to evaluate and demonstrate a cost effective emission control technology for acid rain precursors, oxides of nitrogen (NO{sub x}) and sulfur (SO{sub x}), on two coal fired utility boilers in Illinois. The units selected are representative of pre-NSPS design practices: tangential and cyclone fired. Work on a third unit, wall fired, is on hold'' because of funding limitations. The specific objectives are to demonstrate reductions of 60 percent in NO{sub x} and 50 percent in SO{sub x} emissions, by a combination of two developed technologies, gas reburning (GR) and sorbent injection (SI). With GR, about 80{endash}85 percent of the coal fuel is fired in the primary combustion zone. The balance of the fuel is added downstream as natural gas to create a slightly fuel rich environment in which NO{sub x} is converted to N{sub 2}. The combustion process is completed by overfire air addition. SO{sub x} emissions are reduced by injecting dry sorbents (usually calcium based) into the upper furnace. The sorbents trap SO{sub x} as solid sulfates that are collected in the particulate control device.

Two controllers are developed to provide attitude control of a spinning rocket that has a thrust vectoring capability. The first controller has a single-input/single-output design that ignores the gyroscopic coupling between the control channels. The second controller has a multi-input/multi-output structure that is specifically intended to account for the gyroscopic coupling effects. A performance comparison between the two approached is conducted for a range of roll rates. Each controller is tested for the ability to track step commands, and for the amount of coupling impurity. Both controllers are developed via a linear-quadratic-regulator synthesis procedure, which is motivated by the multi-input/multi-output nature of second controller. Time responses and a singular value analysis are used to evaluate controller performance. This paper describes the development and comparison of two controllers that are designed to provide attitude control of a spinning rocket that is equipped with thrust vector control. 12 refs., 13 figs., 2 tabs.

This project is a part of the continuing Smolt Monitoring Program (SMP) to monitor Columbia Basin salmonid stocks coordinated by the Fish Passage Center (FPC). The SMP provides timely data to the Fish Passage Managers for in season flow and spill management for fish passage and post-season analysis by the FPC for travel time, relative magnitude and timing of the smolt migration. Sampling sites were McNary, John Day and Bonneville Dams under the SMP, and the Dalles Dam under the Fish Spill Memorandum of Agreement'' for 1989. All pertinent fish capture, condition and brand data, as well as dam operations and river flow data were incorporated into the FPC Fish Passage Data Information System (FPDIS). 15 refs., 6 figs., 6 tabs.

We show that the size of the hard gluonic contribution to the first moment of the proton's spin-dependent structure function g{sub 1} is entirely a matter of the convention used in defining the quark distributions. If the UV regulator for the spin-dependent quark distributions respects the gauge invariance of Green's functions (allows shifts of loop momenta) and respects the analyticity structure of the unregulated distributions, then the hard gluonic contribution to the first moment of g{sub 1} vanishes. This is the case, for example, in dimensional regularization. By relaxing the requirement that the regulator allow shifts of loop moments, we are able to obtain a nonvanishing hard gluonic contribution to the first moment of g{sub 1}. However, the first moments of the resulting quark distributions correspond to matrix elements that are either gauge variant or involve nonlocal operators and, hence, have no analogue in the standard operator-product expansion. 11 refs., 2 figs.

MAssive Compact Halo Objects such as brown dwarfs, Jupiters, and black holes are prime candidates to comprise the dark halo of our galaxy. Paczynski noted that these objects (dubbed MACHOs) can be detected via gravitational microlensing of stars in the Magellanic Clouds with the caveat that only about one in 10{sup 6} stars will be lensed at any given time. Our group is currently involved in constructing a dedicated observing system at the Mount Stromlo Observatory in Australia. We will use a refurbished 1.27 meter telescope and an innovative two-color CCD camera with 3.4 {times} 10{sup 7} pixels to monitor 10{sup 6} {minus} 10{sup 7} stars in the Magellanic Clouds. During the first year of operation (1991--1992), we hope to detect (or rule out) objects in the mass range 0.001M{sub {circle dot}} {le} M {le} 0.1M{sub {circle dot}}, and after five years, we hope to have covered the range 10{sup {minus}6}M{sub {circle dot}} < M {approx lt} 100M{sub {circle dot}}. 4 refs.

The central research problem of this project is the effective representation, computation, and display of surfaces interpolating to information in three or more dimensions. If the given information is located on another surface, then the problem is to construct a surface defined on a surface''. Sometimes properties of an already defined surface are desired, which is geometry processing''. Visualization of multivariate surfaces is possible by means of contouring higher dimensional surfaces. These problems and more are discussed below. The broad sweep from constructive mathematics through computational algorithms to computer graphics illustrations is utilized in this research. The breadth and depth of this research activity makes this research project unique.

The overall objective of this program is to develop the engine and lubricant system design approach that has the highest probability for commercial acceptance. Several specific objectives can also be identified. These objectives include: definition of the dominant wear mechanisms prevailing in coal-fueled diesel engines; definition of the specific effect of each coal-related lube oil contaminant; determination of the potential of traditional engine lubrication design approaches to either solve or mitigate the effects of the coal related lube oil contaminants; evaluation of several different design approaches aimed specifically at preventing lube oil contamination or preventing damage due to lube oil contamination; and presentation of the engine/lubricant system design determined to have the most potential. 2 figs., 3 tabs.

We have made striking and considerable progress in our AGS program which is searching for a Quark-Gluon Plasma or other new phenomena at the AGS. We are employing a TCP Tracking Magnetic Spectrometer that has handled up to {approx}100 tracks, the maximum observed in 14.5 GeV/c {times} A Si ions incident on Au and Cu. In essence the TPC covers more than the forward half hemisphere in the nucleon-nucleon cms (i.e. {ge} 2{pi}) and thus allows tracking, momentum and angular analysis of the charged particles emitted in these heavy ion collisions. Particle identification for negative pions can be made approximately by assuming negative particles are pions. Then by subtraction of negatives from positives in a suitable manner the proton characteristics can be determined. {Lambda} and K{sub s}{sup 0} V particles have been identified singly in events and {approx}50 double {Lambda} and 2 triple {Lambda} events have been observed in the relatively small data sample we have obtained and analyzed this year. Further discussion of these topics are contained in this report.

This report discusses research done in string field theory; bosonic technicolor; and supersymmetry. (LSP)

None

Grazing incidence metal mirrors (GIMMs) have been examined to replace dielectric mirrors for the final elements in a laser beam line for an inertial confinement fusion reactor. For a laser driver with a wavelength from 250 to 500 nm in a 10-ns pulse, irradiated mirrors made of Al, Al alloys, or Mg were found to have calculated laser damage limits of 0.3--2.3 J/cm{sup 2} of beam energy and neutron lifetime fluence limits of over 5 {times} 10{sup 20} 14 MeV n/cm{sup 2} (or 2.4 full power years when used in a 1000-MW reactor) when used at grazing incidence (an angle of incidence of 85 degrees) and operated at room temperature or at 77 K. A final focusing system including mirrors made of Al alloy 7457 at room temperature or at liquid nitrogen temperatures used with a driver which delivers 5 MJ of beam energy in 32 beams would require 32 mirrors of roughly 10 m{sup 2} each. This paper briefly reviews the methods used in calculating the damage limits for GIMMs and discusses critical issues relevant to the integrity and lifetime of such mirrors in a reactor environment. 10 refs., 3 figs., 1 tab.

An in-depth review of the measurement techniques that could be used in materials characterization is presented. The measurement techniques to non-destructively determine the in-service or time-related aging of materials considered include ultrasonic velocity and attenuation, eddy current conductivity, neutron scattering and absorption, conventional and tomographic imaging for ultrasonic and radiation imaging, x-ray scattering, thermal impedance, and magnetic hysteresis. The three sections of the report include a review of failure mechanisms in steel and a discussion of nondestructive evaluation techniques and fracture mechanics, a description of a chart on Measurement Techniques versus Material Properties, and recommendations on the techniques and tests to be performed for the experimental investigations and analysis task of the project. 49 refs., 7 figs.

I report on the scientific aspects of my US/USSR Interacademy Exchange Visit to the Soviet Union. My research was conducted at three different institutes: the Lebedev Physical Institute in Moscow, the Leningrad Nuclear Physics Institute in Gatchina, and the Yerevan Physics Institute in Soviet Armenia. I included relevant information about the Soviet educational system, salaries of Soviet physicists, work habits and research activities at the three institutes, and the relevance of that research to work going on in the United States. 18 refs.

Recent results from selected TES research activities in Germany and Sweden under an associated IEA annex are discussed. In addition, several new technologies for heating and cooling of buildings and automobiles were reviewed and found to benefit similar efforts in the United states. Details of a meeting with Didier-Werke AG, a leading German ceramics manufacturer who will provide TES media necessary for the United States to complete field tests of an advanced high temperature latent heat storage material, are presented. Finally, an overview of the December 1990 IEA Executive Committee deliberations on TES is presented.

The fracture of alumina copper-vapor laser tubes has led to great interest in the mechanical properties of pure alumina ({alpha}-Al{sub 2}O{sub 3}) in the Copper Laser Program. In particular, knowledge of the fracture strength of the alumina used to make these tubes is required at temperatures ranging from ambient to 1500{degree}C. The purpose of the work reported here was to confirm that the fracture strength data reasonably well describe the behavior of the alumina used in the Copper Laser Program. The goal was to make this investigation with the minimum of effort and cost. To this end, only ambient temperature tests were planned.

We introduce the coalescence variables, a set of three boost-invariant kinematic quantities which may be used in analyzing n-particle correlations. These variables characterize the invariant mass of an n-particle and in three directions and separate the timelike and spacelike characteristics of the source. The analytic Kolehmanien-Gyulassy model is generalized to give two, three, and four-particle correlation functions, with coherence and Coulomb corrections applied to the basic formalism. We demonstrate the relation of the coalescence variables to be radius and duration of the source, and find that for sufficiently large transverse radii, Coulomb effects can suppress the structure of the Hanbury-Brown-Twiss correlations so that no significant information on source size can be obtained. 11 refs., 10 figs.

This report documents the results of the Department of Energy's (DOE) Tiger Team Assessment of the Argonne Illinois Site (AIS) (including the DOE Chicago Operations Office, DOE Argonne Area Office, Argonne National Laboratory-East, and New Brunswick Laboratory) and Site A and Plot M, Argonne, Illinois, conducted from September 17 through October 19, 1990. The Tiger Team Assessment was conducted by a team comprised of professionals from DOE, contractors, consultants. The purpose of the assessment was to provide the Secretary of Energy with the status of Environment, Safety, and Health (ES H) Programs at AIS. Argonne National Laboratory-East (ANL-E) is the principal tenant at AIS. ANL-E is a multiprogram laboratory operated by the University of Chicago for DOE. The mission of ANL-E is to perform basic and applied research that supports the development of energy-related technologies. There are a significant number of ES H findings and concerns identified in the report that require prompt management attention. A significant change in culture is required before ANL-E can attain consistent and verifiable compliance with statutes, regulations and DOE Orders. ES H activities are informal, fragmented, and inconsistently implemented. Communication is seriously lacking, both vertically and horizontally. Management expectations are not known or commondated …

In October 1989, a US shuttle lifted off from Cape Kennedy carrying the spacecraft Galileo on its mission to Jupiter. In November 1990, a second spacecraft, Ulysses, will be launched from Cape Kennedy with a mission to study the polar regions of the sun. The prime source of power for both spacecraft is a series of radioisotope thermoelectric generators (RTGs), which use plutonium oxide (plutonia) as a heat source. Several of the key components in this power system are required to ensure the safety of both the public and the environment and were manufactured at Oak Ridge National Laboratory (ORNL) in the 1980 to 1983 period. For these two missions, Martin Marietta Energy Systems, Inc. (Energy Systems), will provide an iridium-alloy component used to contain the plutonia heat source and a carbon-composite material that serves as a thermal insulator. ORNL alone will continue to fabricate the carbon-composite material. Because of the importance to DOE that Energy Systems deliver these high-quality components on time, performance of an Operational Readiness Review (ORR) of these manufacturing activities is necessary. Energy Systems Policy GP-24 entitled Operational Readiness Process'' describes the formal and comprehensive process by which appropriate Energy Systems activities are to be reviewed …

The purpose of this note is to analyze the excitation of traveling wave (TW) output structures by an RF current. Such structures are being used in relativistic klystron experiments at Lawrence Livermore National Laboratory. First we will preset a set of difference equations that describes the excitation of the cells of a TW structure. Next we will restrict our attention to structures that have identical cells, except possibly for the first and last cells. Under these circumstances one can obtain difference equations that have constant coefficients, and we will present the general solution of these equations. Lastly we will apply our results to the analysis of a TW output structure. We will show that, by appropriate choice of the quality factors (Qs) and eigenfrequencies of the first and last cells, it is possible to obtain a traveling wave solution for which there is no reflected wave and where the excitation grows linearly with cell number.

A proposal to study the application of the principles of environmental impact assessment (EIA) to policy, plans, and programs was submitted by the US Environmental Protection Agency (EPA) to the Senior Advisors on Environmental and Water Problems of the United Nations Economic Commission. On approval, EPA asked Oak Ridge National Laboratory (ORNL) to support its efforts as lead participant on an international task force. ORNL is responsible for overall project management, including development of the report. At the first meeting in Geneva on June 18--19, there were representatives from Austria, Canada, Finland, Norway, Poland, Sweden, and the United Kingdom. The administrative/legal setting for EIA in each country was reviewed. The objectives of the task force were defined, and issues related to the application of EIA at the policy level were discussed. At the second meeting, in addition to those countries represented at the first meeting the Commission of Economic Communities, Czech and Slovak Federal Republic, Remark, Federal Republic of Germany, Hungary, and The Netherlands were represented. A brief review was given by the new participants of legal/administrative requirements for EIA in their countries. Case studies were presented by Canada, Finland, The Netherlands, Norway, Sweden, and the United States.