None

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Child care facilities in building owned or leased by the State of Texas (RQ-1905)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Potential conflict in two amendments adopted at the same legislative session regarding requirements of notice for spelling realty located in a special district (RQ-1960)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Authority of a county clerk to collect a fee upon filing of an application for emergency detention or court-ordered services in cases involving mental competency or chemical dependency, andrelated questions (RQ-2004)

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Whether the Web County Bail Board may charge a $15 fee on each bail bond that is executed by a licensed bondsman.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Effect of article 8407a, V.T.C.S., as amended by House Bill 1558, Acts 1989, 71st Leg., ch. 1159, § 8, eff. Sept. 1, 1989, Letter of Opinion 88-96 (1988).

There is an OR module assembly stand in use at IB4. This design has been approved by safety, as presented by Mike Foley, and has been successfully used. Another one is needed at the D-zero assembly building, but some modifications need to be made. This report will show that the new modified design is at least as strong, if not stronger, than the older IB4 design in every aspect. Since the weight distribution of the OR modules on the sling is indeterminate, this report compares three cases of support for the entire assembly: the lowest two beams only, the lowest four beams only, and all six beams. In each of these cases, the new design is stronger than the old design in maximum allowable weight. The ability of the the cradle to support the weight is also shown. For all of the failure conditions except for two, the cradle is stronger than the beams that it supports. In the two excepted situations, the calculated limit of the cradle is less than the beams it supports. This is because no credit is taken for the sling and strongback, which in reality will relieve much of the horizontal load.

The assembly of the stainless steel feedthrough box for the CC cryostat resulted in distortion of the slotted plates through which the circuit boards must be installed. Due to the o-ring grooves in the plates and the presence of small pump out passages it is difficult to machine the surface flat after installation. Installing the boards on the distorted surface requires distorting the g-10 flange and the board which is glued to it to match the surface distortion and achieve a seal. This results in stresses for which the epoxy bond may not be adequate. The purpose of this work is to estimate the shear and normal stresses in the two critical planes between the board and flange and evaluate epoxy joint performance.

None

The U.S. Fish and Wildlife Service (USFWS 1983) and the State of Hawaii (DLNR 1986) have listed as endangered six forest bird species for the Island of Hawaii. Two of these birds, the O'u (Psittirostra psittacea) and the Hawaiian hawk (Buteo solitarius) may be present within the Geothermal resource sub-zone (Scott et al. 1986). Thus, their presence could impact future development within the resource area. This report presents the results of a bird survey conducted August 11 and 12, 1990 in the sub-zone in and around the proposed well site and pad for True/Mid Pacific Geothermal Well No.2.

The objective of this project is to evaluate and demonstrate a cost effective emission control technology for acid rain precursors, oxides of nitrogen (NO{sub x}) and sulfur (SO{sub x}), on two coal fired utility boilers in Illinois. The units selected are representative of pre-NSPS design practices: tangential and cyclone fired. A third unit, wall fired, is on hold'' because of funding limitations. The specific objectives are to demonstrate reductions of 60 percent in NO{sub x} and 50 percent in SO{sub x} emissions, by a combination of two developed technologies, gas reburning (GR) and sorbent injection (SI). With GR, about 80--85 percent of the coal fuel is fired in the primary combustion zone. The balance of this fuel is added downstream as natural gas to create a slightly fuel rich environment in which NO{sub x} is converted to N{sub 2}. The combustion process is completed by overfire air addition. SO{sub x} emissions are reduced by injecting dry sorbents (usually calcium based) into the upper furnace. The sorbents trap SO{sub x} as solid sulfates that are collected in the particulate control device.

The Fast Shutdown System (FSS) is a new safety system design concept being considered for in installation in the Savannah River (SRS) production reactors. This system is expected to mitigate the consequences of a Design Basis Loss of Coolant Accident, and therefore allow higher operational power levels. A test of this system in the Georgia Tech Research Reactor is proposed to demonstrate the efficacy of this concept. Three tests will be conducted at full power (5MW) and one at low power (100kw). Two full power tests will be conducted with the FSS rod backfilled with one (1) atmosphere of He-4, and one with the rod evacuated. The low power conducted with the FSS rod evacuated. Neutron flux and pressure data will be collected with an independent data acquisition system (DAS). Safety issues associated with the performance of the Fast Shutdown System experiments are addressed in this report. The credible accident scenarios were analyzed using worst case scenarios to demonstrate that no significant nuclear or personnel safety hazards would result from the performance of the proposed experiments.

This report covers the period from April 1, 1989 to March 30, 1990. During this period further extrusions of fine-grained alloys of FeAl and NiAl with different aluminum contents were produced. Thus far, researchers have (1) completed room temperature mechanical testing which shows that the yield strength, {sigma}{sub y}, of FeAl shows a minimum near Fe-45Al while that for NiAl increases with increasing (nickel-rich) deviation from stoichiometry; (2) showed that the grain boundary strengthening parameter, k, in the Hall-Petch relationship, {sigma}{sub y} = {sigma}{sub 0} + k d{sup {minus}{1/2}} (where {sigma}{sub 0} is the lattice resistance and d the grain size), in FeAl shows a minimum at Fe-45Al whilst in NiAl it decreases with increasing deviation from stoichiometry; (3) studied grain boundary chemistry in near-stoichiometric NiAl and FeAl using scanning Auger electron spectroscopy at Oak Ridge National Laboratory, with the aid of Mr. R.A. Padgett, Jr.; studied grain boundary chemistry using EDS and Z-contrast imaging on field emission gun high resolution scanning transmission electron microscopes; (5) continued in-situ straining experiments in the transmission electron microscope to examine dislocation/grain boundary interactions; (6) examined dislocation structures in lightly-deformed NiAl and FeAl and, based on observations in the latter, proposed a mechanism for …

We examine compression of near-resonant pulses in metal vapor in the nonlinear regime. Our calculations examine nonlinear effects on compression of optimally-chirped pulses of various fluences. In addition, we compare model predictions with experimental results for compression of 4 nsec Nd:YAG pumped dye pulses.

Using first-principles calculations in conjunction with modeling techniques, the author has investigated the structures of Au and Ag monolayers on a number of metal surfaces. Au(100) has a c(26 {times} 68) surface unit cell and the reconstruction has been interpreted as the top layer transforming to a contracted hexagonal-close-packed layer, superimposed on the square lattice of the underlying substrate atoms. Similar reconstructions have been observed on the 5d fcc metals Ir and Pt, but not in the 4d Rh, Pd, and Ag. The author studied the energetics of a monolayer of Au and Ag using first-principles calculations. The author found that it is energetically favorable for both Au and Ag to transform from a square to hexagonal arrangement and to contract to a higher surface density, but Au gains substantially more energy than Ag. This is true both for a monolayer in isolation as well as on top of a jellium surface. The author also calculated the mismatch energy (energy loss when the top layer loses registry with the substrate) for Au and Ag, and found that Ag has a slightly higher mismatch energy. The first-principles results thus offer a strong indication that Au(100) can reconstruct but Ag will not. …

A wide variety of physical phenomena arising within many scientific disciplines can be described by systems of coupled partial differential equations (PDEs). The numerical approximation of these PDEs often involves the solution of a system of algebraic equations (possibly nonlinear) which are typically large, sparse and nonsymmetric. The increasing computational demands required by the solution of such complex scientific applications has motivated the current direction toward large-scale parallel computers. We, therefore, consider solution techniques of representative systems of equations on large scale MIMD machines. Our primary emphasis in this study is the evaluation of iterative methods for the solution of nonsymmetric systems. In particular, we discuss two Krylov subspace methods, the conjugate gradient squared algorithm (CGS) and the generalized minimum residual method (GMRES), along with the multigrid algorithm (MG) on massively parallel MIMD architectures. The focus of this evaluation considers the performance of various algorithm and implementation variations over a broad selection of problems using a parallel machine.

The structures formed on the Ni(100) surface during oxygen adsorption, leading to oxidation, are studied with Video-LEED (low-energy electron diffraction) and AES (Auger electron spectroscopy). The temperature- and exposure-dependence in the development of LEED patterns observed during oxidation of Ni(100), at oxidation temperatures of 80 to 400 K, are investigated extensively. Integrated diffraction spot intensities and fractional spot profiles are measured quantitatively and continuously, allowing unambiguous correlation of various surface processes. AES is used to measure the oxidation onset during adsorption and the final relative thickness of the oxide. 48 figs., 79 refs.

While much research is needed to assess the reality and consequences of alpha-induced instabilities, crude transport estimates for the TAE mode indicate that as little as 10 percent of the alpha energy would be deposited in steady-state. Even so, CIT and the ITER technology phase would meet their minimal goals of Q = 5 if only the alphas themselves are ejected and not the fuel itself. Higher gain up to Q {approximately} 20 may be possible in driven reactors of a different design, depending on the effects of aspect ratio and other geometric features on confinement. Very high gain still requires alpha testing. 5 refs.