This report consists of copies of previous progress reports, and copies of viewgraphs presented in a talk at Los Alamos. The report describes activities carried out as part of a project to evaluate the design and performance of a superconducting wiggler magnet design. It includes work on evaluating the appropriate materials for the magnet coils and poles, and stress evaluations for the design. It includes work on beam optics through the magnet, and design considerations to optimize extraction: work on the cryocooling system; weight minimization efforts; and design work on the vacuum liner for the magnet. A major concern in all of this design work is heat loads which will be dissipated in different parts of the system during operation, as well as transient events.

The purpose of this work is to develop a set of Titanium areal density standards for calibration and maintenance of the Fischer`s X-ray Fluorescence measurement system characterization curve program. The electron microprobe was calibrated for Titanium films on ceramic substrates using an existing set of laboratory standards (Quantity: 6 Range: 0.310 to 1.605). Fourteen source assemblies were measured and assigned values. These values are based on a mean calculation, of five separate readings, from best curve fit equations developed form the plot of the laboratory standards areal density (Source Measure) versus electron microprobe measurement (reading). The best fit equations were determined using the SAS General Linear Modeling (GLM) procedure. Four separate best fit equations were evaluated (Linear, Quadratic, Cubic and Exponential). Areal density values for the Fischer Standards appear here ordered by best fit equation based on maximum R{sup 2}.

In order to help answer questions about the magnitude of heat flux to the liquid argon in a liquid argon calorimeter which could cause boiling (bubbles), calculations estimating the heat flux which can be removed by free convection were made in February, 1988. These calculations are intended to be an estimate of the heat flux above which boiling would occur. No formal writeup was made of these calculations, although the graph dated 3 Feb 88 and revised (adding low-velocity forced convection lines) 19 Feb 88 was presented in several meetings and widely distributed. With this description of the calculations, copies of the original graph and calculations are being added to the D0 Engineering Note files. The liquid argon surface is in equilibrium with argon vapor at a pressure of 1.3 bar, so the surface is at 89.70 K. The liquid is entirely at this surface temperature throughout the bulk of the volume, except locally where it is warmed by a solid surface at a higher temperature than the bulk liquid. This surface temperature is taken to be the boiling temperature of argon at the pressure corresponding to 1.3 bar plus the liquid head; hence it is a function of depth …

The inner vessel heads including bypass and beam tubes had just been welded into place and dye penetrant checked. The vacuum heads were not on at this time but the vacuum shell was on covering the piping penetrating into the inner vessel. Signal boxes with all feed through boards, the instrumentation box, and high voltage boxes were all installed with their pump outs capped. All 1/4-inch instrumentation lines were terminated at their respective shutoff valves. All vacuum piping used for pumping down the inner vessel was isolated using o-ring sealed blind flanges. PV215A (VAT Series 12), the 4-inch VRC gate valve isolating the cyropump, and the rupture disk had to be removed and replaced with blind flanges before pressurizing due to their pressure limitations. Stresses in plates used as blind flanges were checked using Code calcualtions. Before the CC test, vacuum style blanks and clamps were hydrostatically pressure tested to 150% of the maximum test pressure, 60 psig. The Code inspector and Research Division Safety had all given their approval to the test pressure and procedure prior to filling the vessel with argon. The test was a major success. Based on the lack of any distinguishable pressure drop indicated on …

Realization of practical multi-kilowatt Nd:garnet lasers will require the scale-up of crystal dimensions as well as more powerful pumping sources. A high average power zigzag slab crystal amplifier testing facility has been established at LLNL which employs two 100 kW{sub e} vortex stabilized arc lamps, cooled reflectors and a cooled, spectrally filtered, crystal slab mounting fixture. The operational characteristics of the first crystal laser to be tested in this setup, a Nd:GGG zigzag oscillator, are presented. A Nd:GGG crystal of dimensions 18 {times} 7 {times} 0.5 cm{sup 3}, doped at 2 {times} 10{sup 20} cm{sup {minus}3} Nd{sup 3+} atomic density, was pumped by up to 40 kW of filtered argon line emission. A small-signal single pass gain (losses excluded) of 1.09 was measured with a probe laser when the DC input to the lamps was 43 kW{sub e}. Our power supply was then modified to operate in a pulsed mode and provided one to three milliseconds pulses at 120 Hz. An average optical output power of 490 watts was obtained at a lamp input power of 93 kW{sub e} in an unoptimized resonator. The laser output power declined after a few tens of seconds since the slab tips were not …

Nitrate and nitrite have been almost completely removed from the synthetic effluent steam with good efficiency by affecting a separation across a pair of ion exchange membranes. In addition to recovering acid and base in this process, the volume of the remaining effluent is reduced considerably by transport of water across the membrane. One of the problems that remains with this process, however, is the stability of the membranes and particularly the stability of the anion exchange membrane. This membrane is exposed to both nitric acid and strongly alkaline solutions in the cell and to date long term stability has been a problem with the membranes tested. It is recommended that further work should evaluate other newly available membranes as well as study the effects of radiation on the performance of the membranes. The direct reduction of nitrate and nitrite has been studied at several different electrode materials and it has been demonstrated that cathode material has a large effect on both the efficiency and the gas product distribution. Highest current efficiencies for the reduction process are seen at those electrode materials that are known to show high hydrogen overpotentials. Flow cell studies have demonstrated that temperature and current density …

An introduction to the ideas and current state of weak scale supersymmetry is given. It is shown that LEP data on Z decays has already excluded two of the most elegant models of weak scale supersymmetry. 14 refs.

Technology developed by the late Dr. Felix Sebba of the VPI Chemical Engineering Department by which an oil phase can be broken up into small droplets and encapsulated in a continuous water phase led to research on the possible merits of a fuel prepared by this procedure. The resulting mixture is called a polyaphron. Part 1 of this report describes the testing of polyaphronated gasoline in an automobile engine. Nitrogen oxides (NO{sub x}) emissions, total hydrocarbon (HC) emissions, and exhaust temperature were determined for various load and RPM combinations. Difficulties with viscosity and separation of the water phase have prevented complete testing at road load conditions. Rather than continue with engine testing, some bench tests of polyaphrons were performed to see the effect of various filtering processes on fuel stability as well as measuring viscosity and density. These results are reported in Part 2 of this paper. 6 figs., 4 tabs.

The progress made during the current grant period (1 January 1988--1 April 1990) in three different areas of research is summarized. The research areas are: (1) oxidatively-induced double carbonylation reactions to form {alpha}-ketoacyl complexes and studies of the reactivity of the resulting compounds, (2) mechanistic studies of the carbonylation of nitroaromatics to form isocyanates, carbamates, and ureas, and (3) studies of the formation and reactivity of unusual metallacycles and alkylidene ligands supported on binuclear iron carbonyl fragments. 18 refs., 5 figs., 1 tab.

This document summarizes progress made on the research of high beta and second region transport and stability. In the area second stability region studies we report on an investigation of the possibility of second region access in the center of TFTR supershots.'' The instabilities found may coincide with experimental observation. Significant progress has been made on the resistive stability properties of high beta poloidal supershot'' discharges. For these studies profiles were taken from the TRANSP transport analysis code which analyzes experimental data. Invoking flattening of the pressure profile on mode rational surfaces causes tearing modes to persist into the experimental range of interest. Further, the experimental observation of the modes seems to be consistent with the predictions of the MHD model. In addition, code development in several areas has proceeded.

The objectives of the project are to discover and evaluate novel catalytic systems for the conversion of methane or by-product light hydrocarbon gases either indirectly (through intermediate light gases rich in C{sub 2}'s) or directly to liquid hydrocarbon fuels, and to evaluate, from an engineering perspective, different conceptualized schemes. The approach is to carry out catalyst testing on several specific classes of potential catalysts for the conversion of methane selectively to C{sub 2} products. The behavior of alkaline earth/metal oxide/halide catalysts containing strontium was found to be different from the behavior of catalysts containing barium. Two approaches were pursued to avoid the heterogeneous/homogeneous mechanism in order to achieve higher C{sub 2} selectivity/methane conversion combinations. One approach was to eliminate or minimize the typical gas phase combustion chemistry and make more of the reaction occur on the surface of the catalyst by using silver. Another approach was to change the gas phase chemistry to depart from the typical combustion reaction network by using vapor-phase catalysts. The layered perovskite K{sub 2}La{sub 2}Ti{sub 3}O{sub 10} was further studied. Modifications of process and catalyst variables for LaCaMnCoO{sub 6} catalysts resulted in catalysts with superior performance. Results obtained with a literature catalyst Na{sub 2}CO{sub 3}/Pr{sub …

The purpose of this project was to provide team members with practical experience in application of Civil Engineering 555, Solid Waste Management principles. Team members chose to evaluate the functional elements of the Oak Ridge Y-12 Plant's (Y-12's) solid waste management system. The following factors contributed to selection of Y-12'system for evaluation: team members' familiarity with the Y-12 system; knowledge that the Y-12 Centralized Sanitary Landfill II was nearing capacity; and presence of the unique issues posed by special national security and potential radioactive contamination considerations. This report was limited to evaluation of the solid waste management system for conventional solid waste; hazardous radioactive, and radioactive mixed waste were not addressed. The report: (1) describes each functional element including waste generation, storage, collection, transport, processing, recovery, and disposal; (2) identifies and evaluates alternatives for each element and (3) identifies system strengths and recommends opportunities for improvement. 34 figs.

The production of top at the Fermilab Tevatron D0 detector was investigated using full Monte Carlo and event reconstruction packages. In total, 480 events were generated for m{sub T} = 150 GeV/c{sup 2} in the specific t({bar t}) {yields} b({bar b}) + W{sup {plus minus}}, with at least one W decaying to leptons. These events were then analyzed in an attempt to find characteristic signals for top production at D0. 21 figs.

In experimental studies of the Plasma Wake-field Accelerator performed to date at the Argonne Advanced Accelerator Test Facility, significant nonlinearities in both plasma and beam behavior have been observed. The plasma waves driven in the wake of the intense driving beam in these experiments exhibit three-dimensional nonlinear behavior which has as yet no quantitative theoretical explanation. This nonlinearity is due in part to the self-pinching of the driving beam in the plasma, as the denser self-focused beam can excite larger amplitude plasma waves. The self-pinching is a process with interesting nonlinear aspects: the initial evolution of the beam envelope and the subsequent approach to Bennett equilibrium through phase mixing. 35 refs., 10 figs.

From the outset in the 1950's, fusion research has been motivated by environmental concerns as well as long-term fuel supply issues. Compared to fossil fuels both fusion and fission would produce essentially zero emissions to the atmosphere. Compared to fission, fusion reactors should offer high demonstrability of public protection from accidents and a substantial amelioration of the radioactive waste problem. Fusion still requires lengthy development, the earliest commercial deployment being likely to occur around 2025--2050. However, steady scientific progress is being made and there is a wide consensus that it is time to plan large-scale engineering development. A major international effort, called the International Thermonuclear Experimental Reactor (ITER), is being carried out under IAEA auspices to design the world's first fusion engineering test reactor, which could be constructed in the 1990's. 4 figs., 3 tabs.

Microprocessor farms have been successfully employed in high energy physics for both offline analysis and online triggers. As the experiments continue to grow in size, so do the demands for processing power. The preliminary indications are that the large collider experiments will require at least a million VAX-11/780 equivalents of processing power for online trigger decisions and offline event reconstruction. This paper examines the current technology trends and projects the processing power that may be expected with the current farm architectures. 3 refs., 6 figs.

The Electric Power Monthly (EPM) is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the national, Census division, and State levels for net generation, fuel consumption, fuel stocks, quantity and quality of fuel, cost of fuel, electricity sales, and average revenue per kilowatthour of electricity sold. Data on net generation are also displayed at the North American Electric Reliability Council (NERC) region level. Additionally, company and plant level information are published in the EPM on capability of new plants, net generation, fuel consumption, fuel stocks, quantity and quality of fuel, and cost in fuel. Quantity, quality, and cost of fuel data lag the net generation, fuel consumption, fuel stocks, electricity sales, and average revenue per kilowatthour data by 1 month. This difference in reporting appears in the national, Census division, and State level tables. However, at the plant level, all statistics presented are for the earlier month for the purpose of comparison. 12 refs., 4 figs., 48 tabs.

The ETA-II linear induction accelerator (LIA) is designed to drive a microwave free electron laser (FEL). Beam energy sweep must be limited to {plus minus}1% for 50 ns to limit beam corkscrew motion and ensure high power FEL output over the full duration of the beam flattop. To achieve this energy sweep requirement, we have implemented a pulse distribution system and are planning implementation of a tapered pulse forming line (PFL) in the pulse generators driving acceleration gaps. The pulse distribution system assures proper phasing of the high voltage pulse to the electron beam. Additionally, cell-to-cell coupling of beam induced transients is reduced. The tapered PFL compensates for accelerator cell and loading nonlinearities. Circuit simulations show good agreement with preliminary data and predict the required energy sweep requirement can be met.

We present experimental results and a model of Nd:glass disk amplifiers which are used in inertial confinement fusion research. We first review our previous measurements on pulsed xenon flashlamps. We then discuss out measurements on the enhancement of the Nd fluorescence decay rate in laser disks by amplified spontaneous emission. Using these data, we have constructed a model of flashlamp pumping which treats the transfer efficiency of pump light from the flashlamps to the disks as an empirical function. We have found a simple description of this cavity transfer function which provides an excellent fit to the amplifier results for various pump pulselengths. We discuss the concept of the pump area ratio for describing the flashlamp packing density and show that amplifier performance is optimized for values of this parameter near unity. We finally present results for both a single-segment and a multisegment disk amplifier. We have used these devices to investigate new amplifier designs for a large scale fusion driver. 11 refs., 13 figs.

Research programs from NIPER are briefly summarized. Topics include: Development of Analytical Methodology for Analysis of Heavy Crudes, and Thermochemistry and Thermophysical Properties of Organic Nitrogen- and Diheteroatom-Containing Compounds. 1 ref.

How does one assure that both quality and creativity are obtained in basic research environments QA theoreticians have attempted to develop workable definitions of quality, but in more reflective moments, these definitions often fail to capture the deeper essence of the idea of quality.'' This paper asserts that creativity (as a product of the human mind) is a concrete interface between perfunctory definitions of quality (conformance to specifications) and more philosophical speculations about the nature of quality- related ultimates'' like elegance or beauty. In addition, we describe the distinction between creative ideas and creative acts and highlight one of the major inhibitors of creativity, fear. Finally we show that highly creative people often have an irreverent attitude toward boundaries and established authority, and discuss how one can allow for this when designing a QA program in a basic research environment.

This report discusses the following basic research accomplishments: new x-ray structure determination methods were developed and applied to biomembrane lipid phases; a novel mechanism for general anesthesia was proposed; the elastic properties of membranes were investigated, both theoretically and experimentally; the effects of high pressures on membranes were studied; neutron diffraction was used to probe mesophase structure; and novel lipid and surfactant systems are characterized. Also discussed are instrumentation accomplishments.

A 14-MeV deuterium-tritium (D-T) neutron source for accelerated end-of-life testing of fusion reactor materials has been designed on the basis of a linear two-component collisional plasma system. An intense flux (up to 5 {times} 10{sup 18}/m{sup 2}{center dot}s) of 14-MeV neutrons is produced in a fully ionized high-density (n{sub e} {approx equal} 3 {times} 10{sup 21} m{sup {minus}3}) tritium target by transverse injection of 60 MW of neutral beam power. Power deposited in the target is removed by thermal electron conduction to large end chambers, where it is deposited in gaseous plasma collectors. We show in this paper that the major physics issues have now been experimentally demonstrated. These include magnetohydrodynamic (MHD) equilibrium and stability, microstability, startup, fueling, Spitzer electron thermal conductivity, and power deposition in a gaseous plasma collector. However, an integrated system has not been demonstrated. 28 refs., 8 figs., 2 tabs.

This report discusses the following topics on the ARIES tokamak: systems; plasma power balance; impurity control and fusion ash removal; fusion product ripple loss; energy conversion; reactor fueling; first wall design; shield design; reactor safety; and fuel cost and resources. (LSP)