The Compact Torus (Spheromak-type) is a near ideal plasma confinement configuration for acceleration. The fields are mostly generated by internal plasma currents, plasma confinement is toroidal, and the compact torus exhibits resiliency and stability in virtue of the ``rugged`` helicity invariant. Based on these considerations we are developing a coaxial rail-gun type Compact Torus Accelerator (CTA). In the CTA, the CT ring is formed between coaxial electrodes using a magnetized Marshall gun, it is quasistatically ``precompressed`` in a conical electrode section for inductive energy storage, it is accelerated in a straight-coaxial electrode section as in a conventional rail-gun, and it is focused to small size and high energy and power density in a final ``focus`` cone section. The dynamics of slow precompression and acceleration have been demonstrated experimentally in the RACE device with results in good agreement with 2-D MHD code calculations. CT plasma rings with 100 {micro}gms mass have been accelerated to 40 Kj kinetic energy at 20% efficiency with final velocity = 1 X 10{sup 8} cm/s (= 5 KeV/H{sup +}). Preliminary focus tests exhibi dynamics of radius compression, deceleration, and bouncing. Compression ratios of 2-3 have been achieved. A scaled-up 10-100 MJ CTA is predicted to achieve …

The fixture used to hold the IH module while the EC Calorimeter is pul led over it consists of two tripod frames with a double wide flange between them. The two tripods have legs made of 6-inch Schedule 40 pipe, these legs are tied together with 2-inch Schedule 40 pipe. One of the legs sits on and is attached to a box made of 3/4-inch plates. The fixture was analyzed using ANSYS. The element used was a 3-D beam (STIF4). Equivalent properties were figured for the double wide flange. The legs of the tripods were constrained in the Y direction (vertical). The box at the bottom of the tripod leg was not used in this analysis, the leg was constrained at the point of attachment to the box. The cross beam was loaded at two points representing the IH load. The reaction force at the point where the tripod leg attaches to the box was then used in an analysis of the box itself. The box was modeled using plate elements (STIF63). The bottom of the box was constrained in the Y (vertical) direction. The top of the box was loaded in roughly a circular area to represent the pipe …

None

This report describes recent progress in a fundamental, three-year investigation of carbon formation and its effects on the activity and selectivity of promoted iron catalysts for Fischer-Tropsch (FT) synthesis, the objectives of which are: determine rates and mechanisms of carbon deactivation of unsupported Fe and Fe/K catalysts during CO hydrogenation over a range of CO concentrations, CO:H{sub 2} ratios, and temperatures; model the rates of deactivation of the same catalysts in fixed-bed reactors. During the thirteenth quarter design of software for a computer-automated reactor system to be used in the kinetic and deactivation studies was continued. Further progress was made toward the completion of the control language, control routines, and software for operating this system. Progress was also made on the testing of the system hardware and software. H{sub 2} chemisorption capacities and activity selectivity data were also measured for three iron catalysts promoted with 1% alumina. 47 refs., 8 figs., 1 tab.

J. P. Young attended the Fifth International Symposium on Resonance Ionization Spectroscopy and presented an invited oral presentation on research he and coworkers had carried out in applying diode lasers to resonance ionization mass spectrometry. A summary of the conference is given along with an assessment of some of the presentations that the author found of interest. Young also visited Professor Marassi at the University of Camerino to present a seminar and discuss mutual interests in a new molten salt research project of the author. Some of the studies at Camerino are described. Ideas concerning the author's research that came from private discussions are also presented here.

The Winter Fuels Report is intended to provide concise, timely information to the industry, the press, policymakers, consumers, analysts, and state and local governments on the following topics: distillate fuel oil net production, imports and stocks for all PADD's and product supplied on a US level; propane net production, imports and stocks for Petroleum Administration for Defense Districts (PADD) I, II, and III; natural gas supply and disposition and underground storage, for the United States and consumption for all PADD's; residential and wholesale pricing data for propane and heating oil for those states participating in the joint Energy Information Administration (EIA)/State Heating Oil and Propane Program; crude oil and petroleum price comparisons for the United States and selected cities; and US total heating degree-days by city. This report will be published weekly by the EIA starting the first week in October 1990 and will continue until the first week in April 1991. The data will also be electronically after 5:00 p.m. on Thursday during the heating season through the EIA Electronic Publication System (EPUB). See page ii for details. 12 tabs.

The x-ray holography program at the Lawrence Livermore National Laboratory has two principal goals: (1) the development of x-ray diffraction techniques for DNA sequence analysis and (2) the development of x-ray laser holography for structural analysis of intact biological cells and organelles. DNA sequence analysis will be accomplished by applying x-ray diffraction techniques to determine the ensemble average of the sequence of labels along the individual elements of crystalline DNA. X-ray laser holographic imaging will be accomplished by applying three dimensional x-ray holography to elucidate the structure of few hundred angstrom objects such as 300 {Angstrom} chromatin fibers, nuclear pores and nucleic acid replication complexes in living cells. Existing laboratory x-ray lasers will be utilized to produce flash x-ray holograms of the biological structures.

The Fifth International Symposium in Resonance Ionization Spectroscopy and Its Applications was attended. The Joint Research Centre of the European Communities at Ispra, Italy was also visited. The traveler presented an invited talk, chaired a meeting session and gave an impromptu presentation on how current laser technology limits the development of commercial instrumentation based upon Resonance Ionization Spectroscopy. The conference was truely international with scientists from 19 countries and less than 1/4 from the US. The meeting also provided a health mixture of experimentalists and theoreticians. Technical developments reported included the use of electric field ionization from laser prepared Rydberg states as a way to reduce background signals and commercial development of an optical parametric oscillator for replacing pulsed dye laser. A speaker from the Soviet Union suggested their willingness to market hardware they have developed based upon the resonance ionization technique.

As part of the EIA program on petroleum, The US Petroleum Refining Industry in the 1980's, presents a historical analysis of the changes that took place in the US petroleum refining industry during the 1980's. It is intended to be of interest to analysts in the petroleum industry, state and federal government officials, Congress, and the general public. The report consists of six chapters and four appendices. Included is a detailed description of the major events and factors that affected the domestic refining industry during this period. Some of the changes that took place in the 1980's are the result of events that started in the 1970's. The impact of these events on US refinery configuration, operations, economics, and company ownership are examined. 23 figs., 11 tabs.