States

D-0 North End Cap Calorimeter Cold Test Results (open access)

D-0 North End Cap Calorimeter Cold Test Results

The North endcap calorimeter vessel was recieved on July 1, 1990. A cooldown of the pressure vessel with liquid nitrogen was performed on July 10-11 to check the vessel's integrity. With the pressure vessel cold, the insulating vacuum was monitored for leaks. Through out the testing, the insulating vacuum remained good and the vessel passed the test. The cold test was carried out per the procedures of D-Zero engineering note 3740.220-EN-250. The test was very similar to the cold test performed on the Central Calorimeter in October of 1987. Reference D-Zero engineering notes 3740.210-EN-122, 3740.000-EN107, and 3740.210-EN-110 for information about the CC cold test. The insulating vacuum space was pumped on while equipment was being connected to the pressure vessel. Two hours after starting to pump with the blower the vacuum space pressure was at about 210 microns. Pumping on the vacuum space for the next 15 hours showed no progress and a leak detector was connected to the pumping line. A leak check showed a leak in a thermocouple feedthru on the vacuum space relief plate. After fixing the leak, the pressure dropped to 16 microns in less than one hour. A rate of rise test was performed starting …
Date: August 2, 1990
Creator: Michael, J.
Object Type: Report
System: The UNT Digital Library
Application of MeV ions to the analysis and modification of high temperature superconducting materials (open access)

Application of MeV ions to the analysis and modification of high temperature superconducting materials

In analyzing the composition of high {Tc} superconducting materials using heavy-ion RBS we discovered that the electronic excitation of the target caused mixing to occur. To study this effect we made superlattice structures of alternating thin layers of Ba{sub 2}YCu{sub 3}O{sub 6+x} and BaF{sub 2}. At this point in the process some mixing has occurred, but the individual layers are still visible. However, as the bombardment continued the layers were mixed together. It may well be that one can use this phenomenon to produce high {Tc} materials with a wide range of compositions. In this report, we discuss modifications to the high {Tc} superconductors and the subsequent analysis. 10 figs.
Date: November 2, 1990
Creator: Tombrello, T.A.
Object Type: Report
System: The UNT Digital Library
Damage measurements on optical materials for use in high-peak-power lasers (open access)

Damage measurements on optical materials for use in high-peak-power lasers

Recently, we have expanded our efforts to develop state-of-the-art optical components for use in large-scale, high-peak-power, solid state lasers. Laser-induced damage to many of these components sets critical constraints on construction costs and limits the peak powers attainable in current and proposed devices. Increasing the damage threshold whenever possible by improving materials fabrication technology is therefore the ultimate goal of our work. Our research has resulted in an extensive database of laser-damage measurements. We present summaries of these measurements with particular emphasis on those taken at 1064 nm and 355 nm.
Date: May 2, 1990
Creator: Rainer, F.; Brusasco, R. M.; Campbell, J. H.; DeMarco, F. P.; Gonzales, R. P.; Kozlowski, M. R. et al.
Object Type: Article
System: The UNT Digital Library
Development of a numerical computer code and circuit element models for simulation of firing systems (open access)

Development of a numerical computer code and circuit element models for simulation of firing systems

Numerical simulation of firing systems requires both the appropriate circuit analysis framework and the special element models required by the application. We have modified the SPICE circuit analysis code (version 2G.6), developed originally at the Electronic Research Laboratory of the University of California, Berkeley, to allow it to be used on MSDOS-based, personal computers and to give it two additional circuit elements needed by firing systems--fuses and saturating inductances. An interactive editor and a batch driver have been written to ease the use of the SPICE program by system designers, and the interactive graphical post processor, NUTMEG, supplied by U. C. Berkeley with SPICE version 3B1, has been interfaced to the output from the modified SPICE. Documentation and installation aids have been provided to make the total software system accessible to PC users. Sample problems show that the resulting code is in agreement with the FIRESET code on which the fuse model was based (with some modifications to the dynamics of scaling fuse parameters). In order to allow for more complex simulations of firing systems, studies have been made of additional special circuit elements--switches and ferrite cored inductances. A simple switch model has been investigated which promises to give at …
Date: July 2, 1990
Creator: Carpenter, K.H. (Kansas State Univ., Manhattan, KS (USA). Dept. of Electrical and Computer Engineering)
Object Type: Report
System: The UNT Digital Library
Energy conservation standards for new federal residential buildings: A decision analysis study using relative value discounting (open access)

Energy conservation standards for new federal residential buildings: A decision analysis study using relative value discounting

This report presents a reassessment of the proposed standard for energy conservation in new federal residential buildings. The analysis uses the data presented in the report, Economic Analysis: In Support of Interim Energy Conservation Standards for New Federal Residential Buildings (June 1988)-to be referred to as the EASIECS report. The reassessment differs from that report in several respects. In modeling factual information, it uses more recent forecasts of future energy prices and it uses data from the Bureau of the Census in order to estimate the distribution of lifetimes of residential buildings rather than assuming a hypothetical 25-year lifetime. In modeling social preferences decision analysis techniques are used in order to examine issues of public values that often are not included in traditional cost-benefit analyses. The present report concludes that the public would benefit from the proposed standard. Several issues of public values regarding energy use are illustrated with methods to include them in a formal analysis of a proposed energy policy. The first issue places a value on costs and benefits that will occur in the future as an irreversible consequence of current policy choices. This report discusses an alternative method, called relative value discounting which permits flexible discounting …
Date: July 2, 1990
Creator: Harvey, C. (Houston Univ., TX (USA). Coll. of Business Administration); Merkhofer, M.M. & Hamm, G.L. (Applied Decision Analysis, Inc., Menlo Park, CA (USA))
Object Type: Report
System: The UNT Digital Library
Environmental compliance assessment findings for Weldon Spring Site Remedial Action Program (open access)

Environmental compliance assessment findings for Weldon Spring Site Remedial Action Program

This report presents the results of an environmental assessment conducted at Weldon Spring Site Remedial Action Project (WSSRAP) in St. Charles County, Missouri, in accordance with the Formerly Utilized Sites Remedial Action Program (FUSRAP) Environmental Compliance Assessment Checklists. The purpose of this assessment was to evaluate the compliance of the site with applicable federal and Missouri environment regulations. Assessments activities included the following: review of site records, reports ,and files; inspection of the WSSRAP storage building, other selected buildings, and the adjacent grounds; and interviews with project personnel. This assessment was conducted on August 28-30, 1989. The assessment covered five management areas as set forth in the Checklist: Hazardous Waste Management, Polychlorinated Biphenyls (PCBs) Management; Air Emissions; Wastewater Discharges and Petroleum Management. No samples were collected. 1 ref., 2 figs., 1 tab.
Date: March 2, 1990
Creator: Sigmon, C. F. & Levine, M. B.
Object Type: Report
System: The UNT Digital Library
Exploratory coprocessing research (open access)

Exploratory coprocessing research

The objectives of this project are to: (1) study the scope of hydrothermal pretreatment of coal on subsequent conversion, (2) identify and study the chemical or physical causes of this effect, and (3) attempt to elucidate the chemistry responsible for any coal-resid synergisms. This project is divided into three tasks. This quarter we concentrated on Tasks 1 and 2. Task 1: Scope of aqueous pretreatment. Task 2: Chemistry of Pretreatment. Also during this quarter we investigated other means of pretreating low rank coal to enhance conversions. 6 refs., 1 fig., 2 tabs.
Date: November 2, 1990
Creator: Hirschon, A. S.; Tse, D. S.; Malhotra, R.; McMillen, D. F. & Ross, D. S.
Object Type: Report
System: The UNT Digital Library
Extraction, separation and analysis of high sulfur coal (open access)

Extraction, separation and analysis of high sulfur coal

In summary, significant bond cleavage was found only for thiophenol under the supercritical conditions studied. Less than 5% yield was found for the observed reaction products for all the other organosulfur compounds. The hydrogen sulfur bond in thiophenol is clearly the weakest of those studied and therefore it is the easiest to rupture. Also a general trend was observed the solvolysis reaction products such as ethylthiobenzene were the products initially formed at lower temperatures. But with higher temperatures the reaction product were those typically produced from the bimolecular association of free-radicals, such as phenylsulfide for the thiophenol sample. This type of reaction would be expected in pyrolysis reactions. Bimolecular reactions between organosulfur compounds would not be expected when the reaction is occurring at the surface of the solid coal matrix. The probability of the extracted organosulfur radicals having such bimolecular reactions is quite low. However, the reactions that are observed from the interaction of supercritical ethanol and the model coal compounds are not ones that show obvious indications of desulfurization of the compound.
Date: April 2, 1990
Creator: Olesik, S. V.
Object Type: Report
System: The UNT Digital Library
Extraction, separation and analysis of high sulfur coal. Technical progress report No. 11, January 1, 1990--March 21, 1990 (open access)

Extraction, separation and analysis of high sulfur coal. Technical progress report No. 11, January 1, 1990--March 21, 1990

In summary, significant bond cleavage was found only for thiophenol under the supercritical conditions studied. Less than 5% yield was found for the observed reaction products for all the other organosulfur compounds. The hydrogen sulfur bond in thiophenol is clearly the weakest of those studied and therefore it is the easiest to rupture. Also a general trend was observed the solvolysis reaction products such as ethylthiobenzene were the products initially formed at lower temperatures. But with higher temperatures the reaction product were those typically produced from the bimolecular association of free-radicals, such as phenylsulfide for the thiophenol sample. This type of reaction would be expected in pyrolysis reactions. Bimolecular reactions between organosulfur compounds would not be expected when the reaction is occurring at the surface of the solid coal matrix. The probability of the extracted organosulfur radicals having such bimolecular reactions is quite low. However, the reactions that are observed from the interaction of supercritical ethanol and the model coal compounds are not ones that show obvious indications of desulfurization of the compound.
Date: April 2, 1990
Creator: Olesik, S. V.
Object Type: Report
System: The UNT Digital Library
(High T sub c superconductivity) (open access)

(High T sub c superconductivity)

A detailed description of the research conducted at the University of Paris at Orsay and the International Meeting on High-{Tc} Superconductivity, organized by the traveler, H. Schultz from Orsay, and D. M. Newns from IBM, is presented. Particular emphasis is placed on the collaboration with F. Perrot of the Centre Europeen de Calcul Atomique et Moleculaire. In addition, descriptions of the different scientific interactions and information obtained and implications of this scientific exchange on the research conducted in the Solid State Division of ORNL are made.
Date: October 2, 1990
Creator: Rasolt, M.
Object Type: Report
System: The UNT Digital Library
Interagency Geothermal Coordinating Council Annual Report for Fiscal Year 1989 (open access)

Interagency Geothermal Coordinating Council Annual Report for Fiscal Year 1989

The U.S. Interagency Geothermal Coordinating Council was a multi-agency group charged with identifying and reducing barriers to geothermal energy development in the U.S. Many of the issues covered related to regulations for and progress in the leasing of Federal lands in the West for power development. The IGCC reports are important sources of historical information. Table 1 lists significant events in the history of use of geothermal energy in the U.S., starting in1884. That is useful for tracking which Federal departments and agencies managed aspects of this work over time. Table 2 gives a complete accounting for all Federal outlays for geothermal energy development for FY 1979 - 1989, including non-DOE outlays. Table 3 shows the status of the U.S. Geothermal Loan Guarantee Program at end of FY 1989: of the $500 million authorized, $285 million was committed to eight projects, and about $40 million had been paid out on project defaults. An additional $101 million had been repaid by the borrowers. (DJE 2005)
Date: January 2, 1990
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Limits on the masses of supersymmetric particles from 1. 8 TeV p p collisions (open access)

Limits on the masses of supersymmetric particles from 1. 8 TeV p p collisions

Preliminary analysis of p{bar p} collision events at {radical}s = 1.8 TeV using events with large missing transverse energy and on two (four) jets in a minimal SUSY model places new limits on the masses of squarks (gluinos). The data sample (4 pb{sup {minus}1}) was taken in 1988--89 and is approximately 160 times as large as the data sample from our earlier 1987 run (25 nb{sup {minus}1}). 5 refs., 1 fig.
Date: October 2, 1990
Creator: Beretvas, A.
Object Type: Article
System: The UNT Digital Library
The LLNL (Lawrence Livermore National Laboratory) ICF (Inertial Confinement Fusion) Program: Progress toward ignition in the Laboratory (open access)

The LLNL (Lawrence Livermore National Laboratory) ICF (Inertial Confinement Fusion) Program: Progress toward ignition in the Laboratory

The Inertial Confinement Fusion (ICF) Program at the Lawrence Livermore National Laboratory (LLNL) has made substantial progress in target physics, target diagnostics, and laser science and technology. In each area, progress required the development of experimental techniques and computational modeling. The objectives of the target physics experiments in the Nova laser facility are to address and understand critical physics issues that determine the conditions required to achieve ignition and gain in an ICF capsule. The LLNL experimental program primarily addresses indirect-drive implosions, in which the capsule is driven by x rays produced by the interaction of the laser light with a high-Z plasma. Experiments address both the physics of generating the radiation environment in a laser-driven hohlraum and the physics associated with imploding ICF capsules to ignition and high-gain conditions in the absence of alpha deposition. Recent experiments and modeling have established much of the physics necessary to validate the basic concept of ignition and ICF target gain in the laboratory. The rapid progress made in the past several years, and in particular, recent results showing higher radiation drive temperatures and implosion velocities than previously obtained and assumed for high-gain target designs, has led LLNL to propose an upgrade of …
Date: October 2, 1990
Creator: Storm, E.; Batha, S. H.; Bernat, T. P.; Bibeau, C.; Cable, M. D.; Caird, J. A. et al.
Object Type: Article
System: The UNT Digital Library
Marker evaluation of human breast and bladder cancers (open access)

Marker evaluation of human breast and bladder cancers

We are investigating multiple markers in human breast and bladder cancers. Our aim is to identify markers that are clinically relevant and that contribute to our understanding of the disease process in individual patients. Good markers accurately assess the malignant potential of a cancer in an individual patient. Thus, they help identify those cancers that will recur, and they may be used to predict more accurately time to recurrence, response to treatment, and overall prognosis. Therapy and patient management may then be optimized to the individual patient. Relevant markers reflect the underlying pathobiology of individual tumors. As a tissue undergoes transformation from benign to malignant, the cells lose their differentiated phenotype. As a generalization, the more the cellular phenotype, cellular proliferation and cellular genotype depart from normal, the more advanced is the tumor in its biological evolution and the more likely it is that the patient has a poor prognosis. We use three studies to illustrate our investigation of potential tumor markers. Breast cancers are labeled in vivo with 5-bromodeoxyuridine (BrdUrd) to give a direct measure of the tumor labeling index. Bladder cancers are analyzed immunocytochemically using an antibody against proliferation. Finally, the techniques of molecular genetics are used to …
Date: November 2, 1990
Creator: Mayall, B. H.; Carroll, P. R.; Chen, Ling-Chun; Cohen, M. B.; Goodson III, W. H.; Smith, H. S. et al.
Object Type: Article
System: The UNT Digital Library
MH Test Filler Force Limitations (open access)

MH Test Filler Force Limitations

The OH modules for the DO end calorimeter are being tested by supporting a load to simulate the MH, IH, and EM modules. This test structure, the MH filler, is inserted into the previously assembled OH modules, and then loaded with hydraulic jacks. The maximum test load applied by the jacks is 78,600 lb, which is via the two downstream jacks at 130% of the nominal load. Bill Cooper's memo of 9/10/90 is include as appendix C. This note presents calculations for the AISC maximum allowable stresses/loads of the various parts of the testing assembly. Furthermore, calculations show that the actual test load is less than the AISC allowable.
Date: October 2, 1990
Creator: Primdahl, K. A.
Object Type: Report
System: The UNT Digital Library
A microstructural study of creep and thermal fatigue deformation in 60Sn-40Pb solder joints (open access)

A microstructural study of creep and thermal fatigue deformation in 60Sn-40Pb solder joints

Thermal fatigue failures of solder joints in electronic devices often arise from cyclic shear strains imposed by the mismatched thermal expansion coefficients of the materials that bind the joint as temperature changes are encountered. Increased solder joint reliability demands a fundamental understanding of the metallurigical mechanisms that control the fatigue to design accurate accelerated probative tests and new, more fatigue resistant solder alloys. The high temperatures and slow strain rates that pertain to thermal fatigue imply that creep is an important deformation mode in the thermal fatigue cycle. In this work, the creep behaviour of a solder joint is studied to determine the solder's microstructural response to this type of deformation and to relate this to the more complex problem of thermal fatigue. It is shown that creep failures arise from the inherent inhomogeneity and instability of the solder microstructure and suggest that small compositional changes of the binary near-eutectic Pn-Sn alloy may defeat the observed failure mechanisms. This work presents creep and thermal fatigue data for several near-eutectic Pb-Sn solder compositions and concludes that a 58Sn-40Pb-2In and a 58Sn-40Pb-2Cd alloy show significantly enhanced fatigue resistance over that of the simple binary material. 80 refs., 33 figs., 1 tab.
Date: June 2, 1990
Creator: Tribula, D.
Object Type: Report
System: The UNT Digital Library
NMR clinical imaging and spectroscopy: Its impact on nuclear medicine (open access)

NMR clinical imaging and spectroscopy: Its impact on nuclear medicine

This is a collection of four papers describing aspects of past and future use of nuclear magnetic resonance as a clinical diagnostic tool. The four papers are entitled (1) What Does NMR Offer that Nuclear Medicine Does Not by Jerry W. Froelich, (2) Oncological Imaging: Now, Future and Impact Jerry W. Froelich, (3) Magnetic Resonance Spectroscopy/Spectroscopic Imaging and Nuclear Medicine: Past, Present and Future by H. Cecil Charles, and (4) MR Cardiology: Now, Future and Impact by Robert J. Herfkens.
Date: February 2, 1990
Creator: unknown
Object Type: Report
System: The UNT Digital Library
NMR clinical imaging and spectroscopy: Its impact on nuclear medicine (open access)

NMR clinical imaging and spectroscopy: Its impact on nuclear medicine

This is a collection of four papers describing aspects of past and future use of nuclear magnetic resonance as a clinical diagnostic tool. The four papers are entitled (1) What Does NMR Offer that Nuclear Medicine Does Not? by Jerry W. Froelich, (2) Oncological Imaging: Now, Future and Impact Jerry W. Froelich, (3) Magnetic Resonance Spectroscopy/Spectroscopic Imaging and Nuclear Medicine: Past, Present and Future by H. Cecil Charles, and (4) MR Cardiology: Now, Future and Impact by Robert J. Herfkens.
Date: February 2, 1990
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Nucleosynthesis in a baryon-inhomogeneous universe with coupled baryon diffusion (open access)

Nucleosynthesis in a baryon-inhomogeneous universe with coupled baryon diffusion

Detailed calculations of big-bang nucleosynthesis in baryon-inhomogeneous universes show that {Omega}{sub b} can be considerably larger than its limit from standard big-bang nucleosynthesis. Such results require that late-time hydrodynamic effects deplete overproduction of {sup 7}Li and that the QCD surface tension be near the cube of the QCD coexistence temperature for fluctuations of the correct length scales to arise. 15 refs., 1 fig.
Date: August 2, 1990
Creator: Meyer, B.S.
Object Type: Article
System: The UNT Digital Library
ONT High Gain Initiative WRAP (Wide Area Rapid Acoustic Prediction) computational performance section (open access)

ONT High Gain Initiative WRAP (Wide Area Rapid Acoustic Prediction) computational performance section

LLNL received a contract during March 1990 to perform three tasks for ONT. This letter report covers Task I which concerned a supercomputing effort in a program termed the High Gain Initiative, which is an anti-submarine (ASW) project that requires substantial computational and signal processing expertise. The core of the computational aspects at the present time is a code called WRAP (Wide Area Rapid Acoustic Prediction). LLNL's objective was to study the WRAP model and determine the feasibility and limits of its optimization. At the present time, the WRAP code runs on a single processor VAX computer.
Date: October 2, 1990
Creator: McGraw, J. R.; Hedstrom, G. & De Groot, T.
Object Type: Report
System: The UNT Digital Library
Potential Health Risks From Postulated Accidents Involving the Pu-238 RTG (Radioisotope Thermoelectric Generator) on the Ulysses Solar Exploration Mission (open access)

Potential Health Risks From Postulated Accidents Involving the Pu-238 RTG (Radioisotope Thermoelectric Generator) on the Ulysses Solar Exploration Mission

Potential radiation impacts from launch of the Ulysses solar exploration experiment were evaluated using eight postulated accident scenarios. Lifetime individual dose estimates rarely exceeded 1 mrem. Most of the potential health effects would come from inhalation exposures immediately after an accident, rather than from ingestion of contaminated food or water, or from inhalation of resuspended plutonium from contaminated ground. For local Florida accidents (that is, during the first minute after launch), an average source term accident was estimated to cause a total added cancer risk of up to 0.2 deaths. For accidents at later times after launch, a worldwide cancer risk of up to three cases was calculated (with a four in a million probability). Upper bound estimates were calculated to be about 10 times higher. 83 refs.
Date: November 2, 1990
Creator: Goldman, M. (California Univ., Davis, CA (USA)); Nelson, R.C. (EG and G Idaho, Inc., Idaho Falls, ID (USA)); Bollinger, L. (Air Force Inspection and Safety Center, Kirtland AFB, NM (USA)); Hoover, M.D. (Lovelace Biomedical and Environmental Research Inst., Albuquerque, NM (USA). Inhalation Toxicology Research Inst.); Templeton, W. (Pacific Northwest Lab., Richland, WA (USA)) & Anspaugh, L. (Lawren
Object Type: Article
System: The UNT Digital Library
Quarterly coal report, April--June 1990 (open access)

Quarterly coal report, April--June 1990

The Quarterly Coal Report provides comprehensive information about US coal production, exports, imports, receipts, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. This issue presents detailed quarterly data for April 1990 through June 1990, aggregated quarterly historical data for 1982 through the second quarter of 1990, and aggregated annual historical data for 1960 through 1989 and projected data for selected years from 1995 through 2010. To provide a complete picture of coal supply and demand in the United States, historical information and forecasts have been integrated in this report. 7 figs., 37 tabs.
Date: November 2, 1990
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Quotas for CFE Treaty declared site inspections for baseline validation (open access)

Quotas for CFE Treaty declared site inspections for baseline validation

The CFE Treaty will provide for limits on NATO and WTO forces, particularly tanks, armored personnel carriers, artillery, and helicopters. In addition to the overall limits on TLEs in the ATTU zone, there are expected to be secondary limits on single country forces, limits on forces based in foreign nations, and geographic sublimits. To help validate WTO declarations of baseline forces, the treaty may provide for on-site inspections by NATO of declared WTO basing facilities. One important unresolved issue concerning baseline declared-site OSIs is the quota of such inspections allowed each country. This report presents a decision analysis and evaluation in support of recommendations for resolving this and related issues. It also indentifies key policy decisions that impact the determination of the number of declared-site OSIs. These decisions are: Desired probabilities of detecting a violation and of falsely accusing WTO; Trade-off between improved verification and the intrusiveness of additional OSIs; Force strength constituting a militarily significant violation; and Degree of coordination with and reliance on inspections by NATO allies. 10 figs.
Date: October 2, 1990
Creator: Strait, R.S. & Sicherman, A.
Object Type: Report
System: The UNT Digital Library
San Antonio Monthly Reports: April 1990 [Part 2] (open access)

San Antonio Monthly Reports: April 1990 [Part 2]

Compilation of monthly reports from departments in the city of San Antonio, Texas providing statistics, project updates, and other information about services and activities. This set of reports includes information about permits and the Board of Adjustment & Historic Preservation for April 1990.
Date: May 2, 1990
Creator: San Antonio (Tex.)
Object Type: Report
System: The Portal to Texas History