A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Whether a public security officer employed by the state or political subdivision is subject to licensing by the Commission on Law Enforcement Officer Standards and Education (RQ-1809)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Authority of a sheriff to impose a $20 fee on an inmate who is released on bond (RQ-1944)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Questions regarding article 3,section 52-a,of the Texas Constitutions(RQ-1779).

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether section 19 of the Cosmetology Regulatory Act allows the commission to require a beauty shop license for "people who act as independent contractors and rent a booth" in a licensed beauty shop.

Compilation of monthly reports from departments in the city of San Antonio, Texas providing statistics, project updates, and other information about services and activities. This set of reports includes information about permits and the Board of Adjustment & Historic Preservation for April 1990.

Compilation of monthly reports from departments in the city of San Antonio, Texas providing statistics, project updates, and other information about services and activities.

Compilation of monthly reports from departments in the city of San Antonio, Texas providing statistics, project updates, and other information about services and activities.

The U.S. Interagency Geothermal Coordinating Council was a multi-agency group charged with identifying and reducing barriers to geothermal energy development in the U.S. Many of the issues covered related to regulations for and progress in the leasing of Federal lands in the West for power development. The IGCC reports are important sources of historical information. Table 1 lists significant events in the history of use of geothermal energy in the U.S., starting in1884. That is useful for tracking which Federal departments and agencies managed aspects of this work over time. Table 2 gives a complete accounting for all Federal outlays for geothermal energy development for FY 1979 - 1989, including non-DOE outlays. Table 3 shows the status of the U.S. Geothermal Loan Guarantee Program at end of FY 1989: of the $500 million authorized, $285 million was committed to eight projects, and about $40 million had been paid out on project defaults. An additional $101 million had been repaid by the borrowers. (DJE 2005)

The OH modules for the DO end calorimeter are being tested by supporting a load to simulate the MH, IH, and EM modules. This test structure, the MH filler, is inserted into the previously assembled OH modules, and then loaded with hydraulic jacks. The maximum test load applied by the jacks is 78,600 lb, which is via the two downstream jacks at 130% of the nominal load. Bill Cooper's memo of 9/10/90 is include as appendix C. This note presents calculations for the AISC maximum allowable stresses/loads of the various parts of the testing assembly. Furthermore, calculations show that the actual test load is less than the AISC allowable.

None

The North endcap calorimeter vessel was recieved on July 1, 1990. A cooldown of the pressure vessel with liquid nitrogen was performed on July 10-11 to check the vessel's integrity. With the pressure vessel cold, the insulating vacuum was monitored for leaks. Through out the testing, the insulating vacuum remained good and the vessel passed the test. The cold test was carried out per the procedures of D-Zero engineering note 3740.220-EN-250. The test was very similar to the cold test performed on the Central Calorimeter in October of 1987. Reference D-Zero engineering notes 3740.210-EN-122, 3740.000-EN107, and 3740.210-EN-110 for information about the CC cold test. The insulating vacuum space was pumped on while equipment was being connected to the pressure vessel. Two hours after starting to pump with the blower the vacuum space pressure was at about 210 microns. Pumping on the vacuum space for the next 15 hours showed no progress and a leak detector was connected to the pumping line. A leak check showed a leak in a thermocouple feedthru on the vacuum space relief plate. After fixing the leak, the pressure dropped to 16 microns in less than one hour. A rate of rise test was performed starting …

The use of flammable gas and high voltage in detector systems is common in most experiments at Fermilab. To mitigate the hazards associated with these systems'' Fermilab Engineering Standard SD-45B was adopted. As part of their mission the Research Facilities Department and the Site Operations Department have assisted the fixed target experiments in satisfying some of the requirements of SD-45B. This note describes the devices that are available to experiments that will satisfy points of SD-45B. This note is meant to be used as a guide and not a mandatory standard, each experiment is reviewed for compliance with SD-45B by the flammable gas safety subcommittee. This note describes a generic system that should fit the majority of class 1, 2 and low pressure class 3 systems (less than 15 psi).

Numerical simulation of firing systems requires both the appropriate circuit analysis framework and the special element models required by the application. We have modified the SPICE circuit analysis code (version 2G.6), developed originally at the Electronic Research Laboratory of the University of California, Berkeley, to allow it to be used on MSDOS-based, personal computers and to give it two additional circuit elements needed by firing systems--fuses and saturating inductances. An interactive editor and a batch driver have been written to ease the use of the SPICE program by system designers, and the interactive graphical post processor, NUTMEG, supplied by U. C. Berkeley with SPICE version 3B1, has been interfaced to the output from the modified SPICE. Documentation and installation aids have been provided to make the total software system accessible to PC users. Sample problems show that the resulting code is in agreement with the FIRESET code on which the fuse model was based (with some modifications to the dynamics of scaling fuse parameters). In order to allow for more complex simulations of firing systems, studies have been made of additional special circuit elements--switches and ferrite cored inductances. A simple switch model has been investigated which promises to give at …

In analyzing the composition of high {Tc} superconducting materials using heavy-ion RBS we discovered that the electronic excitation of the target caused mixing to occur. To study this effect we made superlattice structures of alternating thin layers of Ba{sub 2}YCu{sub 3}O{sub 6+x} and BaF{sub 2}. At this point in the process some mixing has occurred, but the individual layers are still visible. However, as the bombardment continued the layers were mixed together. It may well be that one can use this phenomenon to produce high {Tc} materials with a wide range of compositions. In this report, we discuss modifications to the high {Tc} superconductors and the subsequent analysis. 10 figs.

LLNL received a contract during March 1990 to perform three tasks for ONT. This letter report covers Task I which concerned a supercomputing effort in a program termed the High Gain Initiative, which is an anti-submarine (ASW) project that requires substantial computational and signal processing expertise. The core of the computational aspects at the present time is a code called WRAP (Wide Area Rapid Acoustic Prediction). LLNL's objective was to study the WRAP model and determine the feasibility and limits of its optimization. At the present time, the WRAP code runs on a single processor VAX computer.

Thermal fatigue failures of solder joints in electronic devices often arise from cyclic shear strains imposed by the mismatched thermal expansion coefficients of the materials that bind the joint as temperature changes are encountered. Increased solder joint reliability demands a fundamental understanding of the metallurigical mechanisms that control the fatigue to design accurate accelerated probative tests and new, more fatigue resistant solder alloys. The high temperatures and slow strain rates that pertain to thermal fatigue imply that creep is an important deformation mode in the thermal fatigue cycle. In this work, the creep behaviour of a solder joint is studied to determine the solder's microstructural response to this type of deformation and to relate this to the more complex problem of thermal fatigue. It is shown that creep failures arise from the inherent inhomogeneity and instability of the solder microstructure and suggest that small compositional changes of the binary near-eutectic Pn-Sn alloy may defeat the observed failure mechanisms. This work presents creep and thermal fatigue data for several near-eutectic Pb-Sn solder compositions and concludes that a 58Sn-40Pb-2In and a 58Sn-40Pb-2Cd alloy show significantly enhanced fatigue resistance over that of the simple binary material. 80 refs., 33 figs., 1 tab.

Potential radiation impacts from launch of the Ulysses solar exploration experiment were evaluated using eight postulated accident scenarios. Lifetime individual dose estimates rarely exceeded 1 mrem. Most of the potential health effects would come from inhalation exposures immediately after an accident, rather than from ingestion of contaminated food or water, or from inhalation of resuspended plutonium from contaminated ground. For local Florida accidents (that is, during the first minute after launch), an average source term accident was estimated to cause a total added cancer risk of up to 0.2 deaths. For accidents at later times after launch, a worldwide cancer risk of up to three cases was calculated (with a four in a million probability). Upper bound estimates were calculated to be about 10 times higher. 83 refs.