Report issued by the U.S. Bureau of Mines covering accidents that happened in metal mines located in the United States including statistics for injuries, fatalities, kinds and causes of accidents, and operational data, such as number of mine workers and shifts worked.

Report compiled by the U.S. Bureau of Mines including statistics on fatal and non-fatal accidents in coal mines located in the United States as well as data regarding the various operations (e.g., number of miners employed and average production). The information is organized into tables for comparison and the text draws some overall conclusions in the summary.

From Summary: "A method is presented for the rapid calculation of the pressure distribution over an airfoil section when the normal-force distribution and the pressure distribution over the "base profile" (i.e., the profile of the same airfoil were the camber line straight and the resulting airfoil at zero angle of attack) are known. This note is intended as a supplement to N.A.C.A. Report Nos. 631 and 634 wherein methods are presented for the calculation of the normal-force distribution over plain and flapped airfoils, respectively, but not of the pressures on the individual surfaces. Base-profile pressure-coefficient distributions for the usual N.A.C.A. family of airfoils, which are also suitable for several other commonly employed airfoils, are included in tabular form. With these tabulated base-profile pressures and the computed normal-force distributions, pressure distributions adequate for most engineering purposes can be obtained."

Report issued by the U.S. Bureau of Mines on the oil and gas production of the Eunice oil field in southeastern New Mexico. Properties of the oil field, and analysis of the oil and gas produced are presented. This report includes tables, maps, illustrations, and photographs.

From Summary: "Optimum proportions of tapered wings were investigated by a method that involved a comparison of wings designed to be aerodynamically equal. The conditions of aerodynamic equality were equality in stalling speed, in induced drag at a low speed, and in the total drag at cruising speed. After the wings were adjusted to aerodynamic equivalence, the weights of the wings were calculated as a convenient method of indicating the optimum wing. The aerodynamic characteristics were calculated from wing theory and test data for the airfoil sections. Various combinations of washout, camber increase in the airfoil sections from the center to the tips, and sharp leading edges at the center were used to bring about the desired equivalence of maximum lift and center-stalling characteristics. In the calculation of the weights of the wings, a simple type of spar structure was assumed that permitted an integration across the span to determine the web and the flange weights. The covering and the remaining weight were taken in proportion to the wing area. The total weights showed the wings with camber and washout to have the lowest weights and indicated the minimum for wings with a taper ratio between 1/2 and 1/3."

From Summary: "The problem of developing a windshield for aircraft which will withstand the effect of bird impacts during flight is a difficult one, as an estimate of the striking energy will indicate. If the average speed of the airplane is considered to be about 200 miles per hour and that of the bird about 70 miles per hour, the speed of the bird relative to the airplane may be as great as 400 feet per second. If a 4-pound bird is involved, a maximum impact energy of approximately 10,000 foot-pounds must be dissipated. To obtain this energy in a drop test in the Washington Monument, it would be necessary to drop a 20-pound weight down the 500-foot shaft. For both theoretical and practical reasons, it is necessary to keep the mass and speed more nearly like those to be encountered. However, to get an impact of about 10,000 foot-pounds with a 4-pound falling body, it would be necessary to drop it from a height of approximately one-half mile, neglecting air resistance. These facts will indicate some of the experimental obstacles in the way of simulating bird impacts against aircraft windshields."

Describes the different types of centipedes and millipedes found in the home, and methods for control.

Describes the characteristics of psocids, their habits, and steps that can be taken to control psocids in the home.

The present report deals with six-component measurements in the small tunnel of the DVL on a model of the BFW-M 27b(sub 1), which were made to determine the effect of rolling and yawing on the air forces and moments. The wind was given a spiral motion by means of a rotating screen, the model being suspended in the conventional manner. The lack of accuracy in the measurement of the rolling-yawing moments was very noticeable.

"The flow over the inner halves of the rotor blades on a Kellet YG-1B autogiro was investigated in flight by making camera records of the motion of silk streamers attached to the upper surfaces of the blades. These records were analyzed to determine the boundaries of the region within which the flow over the blade sections was stalled for various tip-speed ratios. For the sake of comparison, corresponding theoretical boundaries were obtained. Both the size of the stalled area and its rate of growth with increasing tip-speed ratio were found to be larger than the theory predicted, although experiment agreed with theory with regard to shape and general location of the stalled area" (p. 1).

Describes the use, value, and production of farm animals.

Note presenting tests of several forms of fixed wing slot in a large-chord NACA 23012 airfoil in the closed-throat 7- by 10-foot wind tunnel. The airfoil extended completely across the test section so that two-dimensional flow was approximated. The data are presented in the form of tables of important aerodynamic characteristics for each slot tested and as curves of section lift, profile-drag, and pitching-moment coefficients.

Four N.A.C.A. 23012 wings were tested at several angles of yaw in the N.A.C.A. 7- by 10-foot wind tunnel. All the wings have rounded tips and, in plan form, one is rectangular and the others are tapered 3:1 with various amounts of sweep. Each wing was tested with two amounts of dihedral and with partial-span split flaps. The coefficients of lift, drag, and pitching moment are given for all the models at zero yaw. The coefficients of rolling moment, yawing moment, and side force are given for the rectangular wing at all values of yaw tested. The rate of change in the coefficients with angle of yaw is given in convenient form for stability calculations.

Note presenting testing of an N.A.C.A. 23012 rectangular wing with rounded tips in combination with a fuselage of circular cross section at several angles of yaw in the NACA 7- by 10-foot wind tunnel. The model was tested as a high-wing, a midwing, and a low-wing monoplane; for each wing location, tests were made with two amounts of dihedral and with partial-span split flaps. Results regarding the wing and fuselage, fin and fuselage, and wing, fuselage, and fin are provided.

In the present paper, the complete buckling conditions of stiffened plates are being developed for uniform compression. We shall treat plates with one or two longitudinal or transverse stiffeners at any point, discuss the buckling conditions, and evaluate them for different cases.

Describes ways to maximize the value of the cowpea crop, how to best market it, and how to analyze price trends.

This report is part of a series describing the structural features, the character of the oil- and gas-producing beds, and the localities where additional oil and gas may be found in parts of Osage County, Oklahoma. This part discusses the geology and resources in the center part of the county.

Describes how to build and properly heat greenhouses for growing flowers and vegetables year-round.

Describes the benefits of growing tomatoes in greenhouses for improved quality and marketability. Discusses requirements and methods for successfully growing greenhouse tomatoes.

A guide to planting and growing sweet corn for commercial canning. Includes descriptions of sweet corn varieties and provides suggestions for the practical use of factory wastes.

Describes the history of rhubarb, and the steps for planting and cultivating rhubarb in the United States.

Note presenting testing of twenty-two models of flying-boat hulls for the purpose of determining the effects on water resistance and spray of 13 variations in the transverse section of the bottom of the forebody and of three variations in the form of the afterbody. Generally, the effect of chine flare on the resistance was small, although the resistance of force with chine flare was generally less than the resistance of the form without chine flare.

This paper restricts itself to radial impellers with cylindrical blades since, as Prasil has shown, the flow about an arbitrarily curved surface of revolution may be reduced to this normal form we have chosen by a relatively simple conformal transformation. This method starts from the simple hypotheses of the older centrifugal impeller theory by first assuming an impeller with an infinite number of blades. How the flow is then modified is then investigated.

"The optimum circulation distribution and hence the maximum theoretical thrust obtainable for contra-vanes fitted behind propellers is markedly dependent on the number of guide vanes. The outer portion of the vanes, even if projecting considerably beyond the edge of the propeller slipstream, still contribute appreciably to this theoretical gain of thrust. But, owing to the always existing friction of the vanes, the limit of the optimum vane length lies at relatively small diameters" (p. 1).