The validity of the nuclear track emulsion technique for fast-neutron dosimetry is examined in the exposure of a human phantom to PuBe neutrons, Semiautomatic track scanning and high-speed data analysis obviate the major disadvantages of emulsion dosimetry, and allow the absolute differential proton track energy spectrum at various locations in the phantom to be obtained without a serious cost in time. From this are calculated the total absorbed local tissue dose due to proton recoils and the local thermal neutron intensity during irradiation.

In previous letters we have reported a Av resonance, called Y*1, observed through the study of the interaction of 1.15-Bev/c K* mesons in hydrogen in the Lawrence Radiation Laboratory 15-in. bubble chamber. We now wish to report the results of the study of the three reactions [formula](1), [formula](2) and [formula](3).

Recently a T=1 resonance in the [Alpha w] system called [Y*1] has been observed with a mass of 1385 Mev. Two types of resonances have been predicted that might relate this observation to other elementary-particle interactions: (1) P 3/2 resonances in the Alpha w and Sigma w systems predicted by global symmetry corresponding to the (3/2, 3/2) resonance of the wN system, (2) a spin-1/2 Y-w resonance resulting from a bound state in the KN system. The position and width of the observed [Y*1] resonance agree with both theories but since the spin and parity have not yet been determined, it is impossible at present to distinguish between the two theoretical interpretations.

The following report records measurements and evaluations of fast neutron levels in remote areas monitored by personnel.

The thermal decomposition of the higher oxides of praseodymium and americium have been investigated.

From abstract: Absolute cross sections for the production of charged secondary particles is the bombardments of aluminum, nickel, silver, and gold by 332-Mev protons, 187-deuterons, and 380-Mev alpha particles have been determined.

Recent underground nuclear tests conducted by the U.S. Atomic Energy Commission have yielded data on the effects of contained nuclear explosions in four rock mediums: tuff, alluvium, rock salt, and granite. This report presents and compares data obtained primarily through exploratory mining and drilling into the postshot environment of 35 such events.

Numerous articles have recently been published on nuclear pulse height analyses. This report describes an approach to the problem using existing scaling equipment (scale of 1024) as building blocks in a multi-channel pulse height analyzer.

Equations are derived for the rates of heating of objects in induction furnaces and for the maximum temperatures attainable. The equations are primarily useful in designing conducting crucibles, shells, and cylinders so as to increase the power input and decrease heat losses. A very brief treatment is given of the factors which influence the current in the induction coil. The performances of various induction furnaces are compared.

Abstract: The silicides of Ti, Zr, Ce and Nb were investigated to determine the phases present at temperatures around 2000 K. The reactions of silicides of Ti, Zr, Ce, Nb, Ta, Mo, and W with carbon were studied at these temperatures. Also a limited amount of work was done on the reactions of some of the silicides with nitrogen. The data have been used to establish ternary phase diagrams for the systems and to obtain upper and lower limits for the heats of formation of the silicides.

The angle errors of a rotary table can be accurately measured by stepping off the angles with an optical caliper and computing table error from (1) the error readings at each angle measured and (2) the cumulative caliper error that will be evident when the circle is closed at 360', eliminating the necessity of adjusting the caliper to the exact setting.

Technical report describing the methods used for forming wave guides for installations of microwave diagnostic systems for use in Project Sherwood. A machine designed by the author is described along with details of its use.

In any underground nuclear explosion, the shock front that propagates from the shot point carries with it energy from the explosion, and distributes this energy by doing work on the surrounding material. In the process, the material undergoes changes in both its physical and mechanical states. If enough energy is deposited in the material, it will vaporize or melt thus changing its physical state, or cause it to crush or crack. During the past few years, special computer codes have been developed for predicting the close-in phenomena of underground nuclear explosions using the laws of physics, and the knowledge of the properties of the materials in which the detonations occur. As a consequence, a better understanding of experimental observations and measurements has evolved.

Abstract: "Measurements have been made on pseudo-cylindrical graphite-enriched uranium unreflected systems. These measurements include both critical mass determinations and time dependent measurements using a pulsed neutron source to drive the assemblies."

"This is a selective bibliography of books and periodical articles relating to extrusion die design with special emphasis on extrusion of beryllium. Material on the extrusion process has been included when it contains information that might be of possible help in die designing."

The effects of explosion-induced ground motion must be evaluated in planning and executing any nuclear excavation project. For some projects ground use intensity may dictate the use of less-than-optimum yields to minimize damaging effects. In remote areas, weighing the alternatives of outright purchase of some property or use of smaller yields may be required. The cost of indemnifying owners against damage must be considered in any case. Discussions of the effects of ground motion on three broad types of facilities - engineered structures, residential buildings, and equipment required for the support of nuclear excavation operations - are presented. A method of predicting the response of single- and multi-storied buildings, the response spectrum technique, is discussed, with emphasis on the application of explosion-induced spectra.

"Yields of N¹⁷ relative to that produced in LiF have been measured in the 190-Mev deflected deuteron and the 380-Mev alpha beams of the 184-inch synchrocyclotron. The measurements have been performed in all the light elements from 0 through V, with the exception of Sc and the noble gases. In addition, yields were measured in the separated isotopes of Mg...Comparisons are made with other types of yield studies performed with neutrons and protons, and the areas of agreement are noted."

Abstract: Fifty-four spectral lines of curium are listed together with estimated intensities. A brief description of the manner of taking the spectra and of measuring the lines are given.

In the past year, exploratory data have been taken to determine the relative solubilities of hydrogen and deuterium in various solvents in the vicinity of room temperature and atmospheric pressure. This investigation is one phase of a program to determine the feasibility of separating deuterium from hydrogen by means of rectified absorption.

Absolute differential cross sections for the reaction p + p - w+ + d were obtained by detecting meson-deuteron coincidences produced by passing the 340-Mev external proton beam of the Berkeley synchro-cyclotron through a liquid hydrogen target.

"In these studies ions of several-kilovolts energy were extracted from an ion source located inside one of the peaks of the mirror field...The extraction slot of the source is located near the field injection plane, about midway between the mirror peak and the center, and ions are injected perpendicularly to magnetic field lines. In their traversal of the distance between the mirrors, the ions are in an inhomogeneous magnetic field and have a component of velocity along curved field lines. This gives rise to a to a 'guiding center' drift in the azimuthal direction and prevents the particle trajectory from intersecting the ion source after the first reflection. The magnetic field is increased during the injection period by an amount sufficient to move the reflection surface inside the ion source region by the time the ions have precessed completely about the symmetry axis."

In November 1952 an event took place which was to have a profound effect on political alignments of the world. This event was the detonation of "Mike", the first large thermonuclear device. The political implications of this experiment overshadowed what has come to be a major advance in the development of scientific tools; the experimentally verified, extremely high thermal neutron flux observed in Mike. Subsequent to this observation, the Atomic Energy Commission established a study program to investigate this particular characteristic of nuclear devices. Under the program, Los Alamos Scientific Laboratory and Lawrence Radiation Laboratory, Livermore, have studied the mechanisms of high fluxes, capture systematics, general stability characteristics, and more specifically, nuclear design to accomplish this massive neutron irradiation. Utilization of these greatly increased fluxes can be expected to significantly advance understanding in many fields.

The purpose of this letter is to point out certain discrepancies between previous work on the decay of Rb82 (6.3 hour, B+, K-capture) and studies made recently at the University of California Radiation Laboratory.

The following report discusses a survey of seventy-seven interactions of K- mesons in flight in nuclear emulsion with seven decays in flight, and finding four inelastic scatterings.