Secondary charge effects from a 10 kilovolt proton beam and their effect upon beam current measurement are investigated. A collector is designed for beam current metering of a 60 kilovolt proton beam by means of charge measurement and energy measurement.

The state of polonium in aqueous solutions was investigated by means of ion exchange equilibrium studies. The distribution of the polonium between the solid and liquid phases was determined for solutions of various compositions using both a cation and an anion exchanges. These studies show that in the absence of a complexing agent polonium is hydrolyzed to such a degree that it forms monovalent cations and anions whose charge was not investigated in this study.

Ilford type C-2 nuclear research emulsions were exposed in the x-ray beam from the Berkeley synchrotron at four synchrotron energies. The relative yields of the photo-produced nuclear stars were determined as a function of synchrotron energy and prong number.

Describes the investigation of a particular method of extracting ions from an arc. Experimental results of a low extraction voltage ion source are given in some detail.

The proper roof thickness to correspond with a given side wall thickness has been estimated fro experience with the 184 feet cyclotron, which has indicated that a roof of about 1 1/2 feet should accompany a wall of 5 feet, and a roof of 4 feet should accompany a wall of 15 feet. For the roof area involved, this should bring about the condition that down-scattered neutrons in the working areas are but a small fraction of the neutrons coming through the side walls.

The complexing of lanthanum by various anions and weak acids was investigated by observing the light absorption of the complex formed with thenoyltrifluoracetone (TTA). This species showed the properties needed for a satisfactory specgtrophotometric method of analysis.

Our knowledge of the properties of mesons and their interactions with nuclei has come from two sources. Studies of cosmic ray phenomena provided the earliest information. The discovery that mesons may be produced artificially by bombardment of nuclei with radiations from high energy accelerators has, on the other hand, made it feasible to undertake a wide variety of investigations under more controlled conditions than is possible in cosmic ray experiments. In such experiments mesons have been produced by high-energy protons, alpha-particles and neutrons.

Positive and negative mesons produced in a common target in the cyclotron are received in two photographic plates. In the magnetic field of the cyclotron, negatives are deflected to one plate, positives to the other. The mesons must pass through an absorber before entering the plates in order to be observable.

The coefficients of thermal conductivity of aluminum-bismuth metal-to-metal bonds, and of aluminum and bismuth surfaces in contact under pressure, were measured.

The report summarizes results obtained since September, 1951, by total neutron yield experiments using 190 Mev deuterons and the MnSo4 tank method (UCRL-1375 and UCRL-1480). A new method of beam monitoring has resulted in establishing firmly the absolute yield for solid uranium and thorium primary targets backed by a solid uranium secondary. The beam monitoring was done by using a primary target built into a faraday cup. This method circumvents errors caused by recombination in the ionization chambers used previously.

Technical report includes three reports of research progress: 1)Neutron scattering by A. Bratenahl; 2) Nuclear Cross Sections, Norman Knable.

Quarterly progress report on various research projects conducted at the University of California Radiation Laboratory

The effect of air, nitrogen, helium, argon, and a mixture of twenty volume percent of hydrogen in argon on the wetting of a stainless steel (Type 446), a two percent chromium-one half percent molybdenum type steel, and a plain carbon type steel by liquid bismuth was investigated

FLOSS III is a third-generation version of a digital computer program which solves a one-dimensional difference representation of the momentum, energy, continuity, and state equations for turbulent, compressible gas flow in equivalent hydraulic channels. Extensive use of this program has been employed in the design and performance analyses of Pluto-type nuclear heat exchangers, and in the specific case of the Tory II-A test series, agreement was obtained to better than 5% for all experimentally measured parameters. The NOMAC and DASH-N programs combine the effects of up to thirty varieties of channels with the dependent boundary conditions imposed by a common inlet diffuser and exit nozzle. The resulting calculations yield performance information for blow-down facility and ramjet flight condition application of the heat exchanger.

Project Sherwood is a nation-wide attempt to produce a controlled thermo-nuclear fusion reaction. The Astron experiment, conceived by Nicholas Christofilos, will utilize the effects of a cylindrical layer of relativistic electrons to contain and heat the plasma. A high quality, 200-ampere, 5-Me V electron beam is required to form the electron layer. The electron beam is produced by a linear induction electron accelerator. Three hundred and thirty-three toroidal cores of magnetic material surround an evacuated ceramic accelerating column. The electrons are accelerated by the transverse electric field produced by the changing flux. The magnetic cores are tape-wound toroids of .001", 50% Ni - 50% Fe. Two hundred eighty-eight cores are 24" o.d. x 8-1/2" i. d. x 1/2" thick and the remaining forty-five are 33" o. d. x 18" i. d. x 1/2" thick. Each core is required to support 16 kG for 0.4 psec. The choice of magnetic material was made by testing all available material for the required parameters. Results of these tests are presented.

The theory of the hydrodynamic origin of cosmic rays proposed by Johnson and the author (Colgate) has developed to the point where the final evolution of a star to the supernova instability and subsequent explosion can be described with sufficient detail such that cosmic rays with appropriate intensity, composition, and spectrum to account for observations are a logical and necessary result. In the first publication it was pointed out that nuclei in the surface of the star may acquire many orders or magnitude more than the average energy per particle released in the explosion because of the large ratio of matter density between the core and the outer mantle. A shock from a sudden pressure increase in the core intensifies as it advances into lower-density material, thereby imparting extreme relativistic energies to the outermost layers. The shock wave was assumed on the basis that the observed explosion occurred in a time short compared to the traversal time of sound across the dimensions of the star. It was argued without proof that an adiabatic process would be inconsistent with the accepted gravitational instability as the trigger mechanism. In an attempt to confirm this supposition we extend the hydrodynamic calculations to describe …

A phase shift analysis is an attempt to translate experimental measurements (observables) into well-determined scattering amplitudes, since these are the quantities that can be readily compared with theoretical predictions, In this sense, the phase shift analysis should contain as little theory as possible. The scattering amplitudes (or phase shifts) constitute an experimental statement, and the phase shift analysis should logically be done by the experimental groups who measure the observables.

This scaler was designed to replace an obsolescent tube design that was in general use at Lawrence Radiation Laboratory in Livermore. The new design, using solid state devices and printed circuit modules, allows two complete scalers in one frame to occupy the same rack space as the tube design. Switches in the input circuits of the new scaler change input impedance and sensitivity for operation with either tube or transistor circuits. The use of transistors has greatly increased reliability, and has also reduced power by a factor of fifteen. Modular construction of all circuits, including the power supply, minimizes down time since all modules are replaceable without removing the scaler from its rack. Reliability, then cost, were the criteria dictating choice of components and circuits in the scaler design.

The transient aerothermodynamic processes in a gas-cooled reactor are described in a simplified manner to illustrate some of the fundamental physical phenomena involved, to provide some approximate but useful methods of analysis, and to aid in the understanding and use of more complex computer solutions. The transient heat balance equation for an element of a single reactor channel is derived in terms of aerothermodynamic time constants, and typical analytic solutions for transients are presented. This equation is used in generating the time-dependent equation for the channel exhaust gas temperature. The single-channel analysis is extended to multiple channels. A method for determining the approximate transient temperature envelopes for various reactor components is presented. The effects of aerodynamic and thermal coupling between different reactor channels are illustrated. Some of the simplifying assumptions are investigated with respect to the conditions under which they are valid.

It has been shown that the time of burst of exploding wires can be predicted from known thermodynamic and electrical properties of the wire materials under some conditions. The mathematical relationships are a set of integrals (transformation time integrals) similar in form to the empirical "action integrals" sometimes used in exploding wire work. This paper discusses the use of the transformation time integrals to calculate the resistance and temperature of a wire as a function of time up to the time of burst and to investigate the effects of environment of the wire on the temperature, resistance, and time of burst.

Nuclear excavation is the name given to the concept of using large scale nuclear explosion craters for useful projects, such as harbors, canals, and roadway cuts. It is one of the principal applications of the Plowshare Program for industrial, or peaceful, uses of nuclear explosives. Plowshare is sponsored by the U.S. Atomic Energy Commission and is under the technical direction of the Lawrence Radiation Laboratory at Livermore, California. The purpose of this paper is to describe cratering concepts and the present state of nuclear excavation technology. The general nature of the safety hazards associated with nuclear excavation are also discussed.

If a piston with constant velocity moves into a shock tube containing material at rest and at uniform density, the result is well known and trivial. The shock propagates with uniform speed, the state and speed of the material behind the shock is constant. One can ask if similar flows exist for cylindrical of spherical symmetry. Quickly one rules out the possibility of a solution which retains all the properties of this trivial solution. One asks if there are any solutions such that the material behind the shock is not accelerated. Indeed, there are. In the following, it is shown that for a y-law gas, there is a family of densities such that if a piston moves into the material with uniform velocity, the material behind the shock is not accelerated. Further, these are the only densities with this property. In the case of planar symmetry, the trivial case mentioned above is a member of the family, as is to be expected.

Recent underground nuclear tests conducted by the U.S. Atomic Energy Commission have yielded data on the effects of contained nuclear explosions in four rock mediums: tuff, alluvium, rock salt, and granite. This report presents and compares data obtained primarily through exploratory mining and drilling into the postshot environment of 35 such events.

The calibration of mercury vapor detectors has always posed a problem because of the difficulty of generating known concentrations of mercury vapor in air. The purpose of this study was to design an apparatus that would generate and chemically measure known concentrations of mercury vapor in air for calibration work.