Abstract: This memorandum presents the possible applications and instructions for using REDCROSS, an IBM-704 computer program.

Specimens of two ferroelectric materials, barium titanate and lead-zirconate titanate, have been subjected to high dynamic stresses by impacting them with a projectile accelerated by an air gun. The purpose of these tests was to supplement information previously obtained using high explosives to stress the ferromagnetic materials.

This report presents a description of and operating instructions for APOTA--a device which automatically tracks any signal-emitting source within the 190 to 250 MC band. APOTA is especially useful for telemetering applications.

Abstract: This technical memorandum describes an automatic tester and recorder as it is used in obtaining fusing time information from electrical fuses for subsequent analysis in the IBM 704 computer.

Abstract: Methods are presented for calibrating a peak current gage which was developed at Sandia in the spring of 1953.

Abstract: "Methods developed by [the Systems Evaluation Department] to analyze circular targets are extended to handle a particular family of casualty curves."

The short-circuit coaxial antenna in a lossy medium is analyzed using transmission line theory.

A plot of overpressure versus distance is presented for the fractional psi pressure level. The plot provides a rapid and simple means of estimating the permissible yield at any distance from settled areas.

The primary purpose of this study was to find a method for establishing component reliability requirements from system reliability specifications, because component reliability requirements are presently arbitrarily and vaguely defined.

A digital comparator has been designed to flag data which goes above a maximum limit or below a minimum limit.

The need for special high velocity shock testing is pointed out and equipment that has been developed to meet these needs is discussed. The concept of velocity-change and its importance in shock-testing technology is brought out. The three types of equipment discussed are: accelerated drop testers, pneumatic actuators, and air guns. Examples of each type and their capabilities and limitations are presented.

Abstract: The purpose of this report is to describe the problems inherent to general dielectric strength measurements, and to act as a guide in establishing a method for pulse dielectric strength measurements.

Abstract: Presented here are working graphs of pressure, density, velocity, and temperature from the Los Alamos Scientific Laboratory calculations (IBM Problem M) of a spherically symmetric explosion in a homogeneous atmosphere.

Test requirements for several components specifies that surge currents be monitored to determine if the initial peak surge current exceeds a certain predetermined amplitude. This report describes and evaluates two circuits which were developed by Organization 2451 to meet this requirement in production testing.

Abstract: A method is given for the rapid and accurate numerical integration of integrals of the form [integral] [superscript infinity] [subscript infinity] f(x) [golden ratio constant] (x) dx, where f(x) is "smooth."

Abstract: This memorandum discusses a new design definition technique, requiring no standard, which pictorially shows part and gage limits on the same drawing. When functional gages, test fixtures, or optical chart gages are the selected inspection method, design, manufacturing process, and gage engineers can use these drawings directly to replace the usual standards-based drawings. In essence, this advanced technology visually describes true position dimensioning and tolerancing. It enables product designers to directly control the acceptance process.

Abstract: A method is presented of predicting the shock response of a friction-damped vibratory system.

Abstract: Results of pressure tests of a reflection plane in the Sandia 12-inch transonic wind tunnel to determine lateral and longitudinal Mach distribution over the plate at 0.5≤M≤1.30 are presented.

A quantizing pulse ammeter has been designed which brackets an input pulse current peak between two preset current levels. These levels are easily selected by calibration circuits contained on the chassis. Readout is presented in the form of a Nixie visual display as well as an output which is suitable for automatic data recording.

Abstract: Force, moment, and center of pressure information are presented for four models of the Hi-Lo configuration.

Abstract: This memorandum describes the components and presents the operating and maintenance instructions for the 12-inch transonic wind tunnel analog-to-digital data gathering systems.

Abstract: Tests were made on 24 simply supported, post-tensioned, end-anchored, prestressed concrete beams with and without web reinforcement.

Abstract: This report describes two tests made to obtain data on the loads that equipment is subjected to during railroad switching.

From abstract: This paper presents the results of a study of the error in radio interferometer measurements of near sources attributable to the use of asymptotic formulae, valid for distant targets.