Report containing tables of the Racah Coefficients.

From introduction: "This report covers work performed in the Solid State Division for the quarter ending May 10, 1952." Topics covered include radiation metallurgy, engineering properties, solid state reactions, crystal physics, and special projects.

From abstract: "This report presents the laboratory development of the MTR-RaLa Process for the production of barium140 from Materials Testing Reactor assemblies." The laboratory studied four possible chemical schemes with the final process being chosen "on the basis of chemical yield and purity of product, ease of recovery of uranium235, simplicty of equipment, and overall time required for processing" (from introduction).

From abstract: "The methods of applying results of bulk-shielding measurements to the design of reactor shields is outlined. Geometrical transformations for the more common shapes are derived, as are approximate means of calculating leakage of radiation. As an illustration of the methods, the ORNL Lid Tanks and Bulk Shielding Facility data are transformed to a standard geometry and compared. Two direct calculations of water attenuation, using cross sections described in the previous article, are finally compared with the experimental data."

This quarterly progress report details the ongoing research and experiments at the Oak Ridge National Laboratory as part of the Aircraft Nuclear Propulsion Project. The first part of this report discusses reactor theory and design. The second part of this report is not included. The third part of this report discusses materials research. The fourth part of this report includes appendixes

This quarterly progress report details ongoing work at the Oak Ridge National Laboratory as part of the Aircraft Nuclear Propulsion Project. Topics of discussion include reactor theory and design, shielding research, materials research, appendixes with information on ongoing analytical chemical studies.

This quarterly progress details ongoing research at the Oak Ridge National Laboratory as a part of the Aircraft Nuclear Propulsion Project. Topics discussed include reactor theory and design, [part two is not included], materials research, and appendixes with information on analytical chemical studies.

The first part of this quarterly progress report details reactor theory and design, discussing the aircraft reactor experiment, experimental reactor engineering, reactor physics, and critical experiments. The second part of this report is not included. The third part of this quarterly progress report details materials research, discussing corrosion research, physical properties and heat-transfer research, metallurgy and ceramics, chemistry of high-temperature liquids, and radiation damage. The fourth part of this quarterly progress report details alternate systems, discussing a supercritical water reactor, circulating-moderator-coolant reactors. The fifth part of this quarterly progress report includes appendixes.

This quarterly progress discusses the ongoing work at the Oak Ridge National Laboratory for the quarter ending in March 10, 1952. Topics discussed include reactor theory and design, shielding research, materials research, and includes appendixes with supplemental information.

This progress report discusses the work during the fourth quarter of 1951. During this quarter, "the uranium raw materials program at ORNL has been devoted to studies of uranium chemistry and to the development of processes for deriving uranium and byproducts from various types of ores" (From introduction).

This report presents "Results of a critical literature review on pressure drop due to isothermal turbulent flow in noncircular geometries" (introduction).

From introduction: "The tube arrangement covered in this report was proposed in June, 1950, as a means of halving the weight and volume required for the heat exchanger. Ideally, the pressure drop across this arrangement should be little more than that required to overcome the skin friction on the tube surfaces. If the pressure drop across the tube spacers and in the cross-flow regions can be kept low, this ideal can be approached. much of the test work covered in this report was devoted to this phase of the problem."

From abstract: "This report presents the progress in the laboratory development of a continuous solvent recovery process for the tributyl phosphate-diluent mixture used in the Purex Process. Investigations were made with 1/2" diameter pulse columns, using a nine foot sodium carbonate contacting column and a four foot water wash column."

From introduction: "The ORNL-ANP liquid-to-liquid heat exchanger design and development effort has been based on an exceptionally high performance matrix of closely-spaced small diameter tubes that permits practically pure counter-flow operation. In the course of full-scale aircraft power plant design work a number of charts for this type of heat exchanger has been prepared. These charts were intended in part to show the effects of the various parameters in a readily understandable form, and in part to simplify and to reduce markedly the chore of making detailed design calculations. These charts have proved so helpful it seemed very worthwhile to assemble them into a report along with brief explanations and sample calculations."

This quarterly progress report discusses ongoing work at the Metallurgy Division at the Oak Ridge National Laboratory. Topics discussed include thorium research, the preferred orientation of uranium, studies in the ceramics laboratory, the homogenous reactor program, studies in the x-ray laboratory, studies in the metallographic laboratory, the experimental plate-cladding program, and fuel and control element fabrication.

This quarterly progress report describes the ongoing research at the Metallurgy Division at the Oak Ridge National Laboratory. In particular, this report discusses the thorium research program, the slug problem, the preferred orientation and anisotropy in metals, fundamental studies of alloying, and the ANP program.

This quarterly progress report discusses ongoing research and experiments at Oak Ridge National Laboratory in the Metallurgy Division. This report discusses thorium research, the mechanical properties of metals including thorium, uranium, inconel, and z-nickel, the ANP program (including the following topics: the physical chemistry of liquid metals, and welding research), and the materials testing reactor program.

From abstract: "Data obtained in laboratory studies of the 'fumelses dissolving' of irradiated uranium are presented. Procedures for handling dissolver off-gases are proposed."

From summary: "The influence of the structure of phosphate esters on the distribution coefficient of uranium between solutions of these esters in carbon tetrachloride and aqueous nitrate solutions has been studied. Esters of secondary alcohols showed higher distribution coefficients than primary alcohols. Phenyl esters extracted less uranium than alkyl esters, and the presence of other negative groups also resulted in less extraction. Compounds containing carbon to phosphorus bonds gave higher distribution coefficients than the corresponding esters, and the distribution coefficients increased with the number of such carbon to phosphorus bonds. Tributyl phosphine oxide (with three carbon to phosphorus bonds) showed high distribution coefficients with many salts, including uranyl nitrate, uranyl sulfate, uranyl chloride, thorium nitrate, plutonium (IV) nitrate and some of the fission products in nitrate solution. It is planned to study these and similar compounds further."

From abstract: "A continuous countercurrent solid-liquid contactor has been developed which retains the desirable features of the conventional fixed bed and gains the advantages of countercurrent flow. It can be adapted to many solid-liquid mass-transfer processes such as ion exchange, silica gel adsorption, and ore leaching."

This progress report discusses new additions to the Mathematics Panel and discusses new and further work happening at Oak Ridge National Laboratory relating to the Mathematics Panel, of particular note is the Oak Ridge computer which is being fabricated at Argonne National Laboratory and the Technitrol Company.

Report discussing the progress of various research projects by members of the Mathematics Panel at Oak Ridge National Laboratory for the quarter ending April 30, 1952.

From introduction: "During the second quarter of fiscal year 1952, the Isotope Production and Process Development Department placed primary emphasis on the collection of lithium, iron and calcium isotopes."

This quarterly progress report discusses in detail the work done by the Analytical Chemistry Division at Oak Ridge National Laboratory. In particular, this report discusses the research and development work ongoing at the X-10 Site and the Y-12 Site.