From Introduction: "One part of this study, which is presented in this Monograph, consists of an analysis of electric energy usage and electric power demand data obtained from a sample group of occupied houses at Little Rock Air Force Base in Arkansas, equipped with heat pumps, water heaters, cooking ranges, clothes dryers, and miscellaneous appliances all operated by electricity."

Report discussing how solids subjected to non-uniform temperature change develop internal stresses determined by, (1) the temperature distribution within the solid, and (2) certain physical constants of the material. For two varieties of heating, the equations determining stress have been put in convenient form for practical use, and tables of certain temperature functions show how to determine stresses in a slab, in a cylinder, or in a sphere subjected to either of two modes of heating. The temperature-distribution tables independently provide a useful means for the ready estimation of temperature gradients.

From Introduction: "The purpose of this guide is to describe, discuss, and analyze methods of measuring the average noise factor and average effective input noise temperature of an electronic transducer."

Report providing a detailed and analytical assessment of the economic techniques used by researchers to evaluate the efficiency of capital markets. The application of these techniques to that portion of the capital market which supplies venture funds to small, technology-based firms is emphasized. The primary elements of such analysis are the "efficient market ' hypothesis" and the "capital asset pricing model." The empirical analogue of the latter is commonly referred to as the market model."

From Abstract: "Several dynamic determinations have been made of the constants of quartz. Most of these determinations do not take into account the piezoelectric effect; those that do, suffer from certain deficiencies which are discussed in this paper."

Report of the near ultraviolet and visible emission spectrum of CH presented in the form of a spectrophotometric atlas. The spectrum was recorded photoelectrically from an acetylene-oxygen flame in the region 4900 to 3000 A by use of a high-resolution grating monochromator. Each of the lines in the CH spectrum is identified.

From Forward: "Although the first paper in this volume describes the general aspects of the technical management of the program, it is important to emphasize that much of success and productivity of this program stemmed from the sympathetic understanding of its basic viewpoint by both the Department of Defense and the National Bureau of Standards."

Report discussing variations in comparative tests of portland cements that could lead to the rejection of a material fully conforming to specification requirements, or the acceptance of a material with undesirable chemical or physical properties. Many of the causes for variation in chemical analyses and physical test results are listed in this discussion, and remedies for some of the more frequently encountered deficiencies in apparatus and methods are suggested.

Report compiling the work done in radio meteorology over the past ten years at the National Bureau of Standards' Central Radio Propagation Laboratory (CRPL). There is an emphasis upon the effects of the lower atmosphere on the propagation of radio waves. The CRPL group has concentrated upon the refraction of radio waves as well as the refractive index structure of the lower atmosphere on both synoptic and climatic scales. Additional chapters on radio-meteorological parameters and the absorption of radio waves by the various constituents of the lower atmosphere.

From Introduction: "In this monograph, the background of the exponential reference atmosphere will be outlined and a set of radio ray tracings presented. These ray may be used for the solution of many problems involving refraction by means of the exponential reference atmosphere."

From Introduction: "This Monograph has as its purpose the compilation and analysis of the extensive radio refractive index data available within the Central Radio Propagation Laboratory of the National Bureau of Standards. This will be accomplished by presenting both tabulations of basic data for specific locations and charts for interpolation to any location."

Report issued by the Bureau of Standards over "the basic theory and analytical methods used in the development of accurate microwave measurement methods and standards" (p. x). These methods are presented and discussed. This report includes tables, illustrations, and photographs.

Report discussing microwave attenuation measurement methods and standards. In addition, a relatively new and more precise way of representing and analyzing an attenuation measurement is presented. This in turn permits more rigorous definitions and error analyses than were previously possible. The referral of microwave attenuation measurements to standards operating at lower frequencies is discussed with particular attention to the errors in the referral processes as well as the errors in the standards themselves. Desirable characteristics are listed for attenuators which are suitable for calibration. Measurement methods are classified and described. Comments are made on the accuracy and convenience of various methods, and references are given which cover most of the basic and important research in this field. Key words: Microwave, attenuation, measurements, standards, tutorial.

Report presenting a survey and discussion of well-known microwave impedance measurement techniques. The discussion includes an introduction which emphasizes basic concepts and reflection coefficient-voltage standing-wave ratio relationships. Sources of error in the various measurement techniques are discussed and methods to reduce errors are presented. Methods using rotating loops and resonance lines are included and a brief discussion of microwave impedance standards is given.

Report issued by the Bureau of Standards over a survey conducted on measurement methods of network parameters. As stated in the introduction, "this paper is concerned with the development of automatic methods of measuring basically the magnitudes and phase differences, or the complex ratio of two sinusoidal voltages, and applications of this capability to determining complex reflection coefficients and transmission coefficients and group delay times of electrical networks" (p. 1). This report includes tables, and illustrations.

Report describing the interferometric measurement process using a laser light source and a Kosters type gage block interferometer. Continuous evaluation and refinement of the process is aided by statistical treatment and control chart techniques. All error sources, both random and systematic, are evaluated and the process is maintained in a state of statistical control.

Report discussing optical wedge beam splitters and the basic theory for computing the ratio of the intensity of the incident beam to the intensity of any selected emerging beam and also for computing the direction of the emerging beam, assuming that the wedge angle, index of refraction, angle of incidence, and number of reflections are known.

From Abstract: "The data obtained at the National Bureau of Standards on the sound insulating properties of building structures are summarized. A brief description of the sound-measuring techniques is given."

From Introduction: "This Monograph, supplemented by ORNL-3207 [9], should eliminate completely the need for use of approximate formulas (e.g. those of Kotani and Ross [10]). The formulation of the problem has been summarized in sec. II. This is followed in sec. III by a discussion of the methods used in numerical calculations. Sec. IV contains a detailed explanation to facilitate the use of present tables."

From Abstract: "This is a tutorial Monograph describing various aspects of time and frequency (T/F). Included are chapters relating to elemental concepts of precise time and frequency; basic principles of quartz oscillators and atomic frequency standards; historical review, recent progress, and current status of atomic frequency standards; promising areas for developing future primary frequency standards; relevance of frequency standards to other areas of metrology including a unified standard concept; statistics of T/F data analysis coupled with the theory and construction of the NBS atomic time scale; an overview of T/F dissemination techniques; and the standards of T/F in the USA. The Monograph addresses both the specialist in the field as well as those desiring basic information about time and frequency."

Report issued by the Bureau of Standards over studies on the importance of conductive flooring in hospitals. Types of conductive flooring are compared, and tested. The methods and results are presented, and discussed. This report includes tables, illustrations, and photographs.

Report discussing the selection, specifications, and use of signal-light colors. It discusses the nature of the problem, and the mathematical representation, recognition, production, control, and use of such colors. The characteristics of different types of chromaticity boundaries and the purpose and effect of the requirement for similarity of chromaticity characteristics are given special consideration. The treatment is varied according to the intended use. The discussion of the control of colors and the section on the use of colors are nontechnical, whereas the section on the production of signal colors is designed for the colorimetrist who is faced with the problem of selecting limit filters or drafting a specification.

Report containing information regarding He4 vapor pressure measurement as of 1958, the recent history of the vapor pressure temperature scale, and a series of tables containing these measurements.

From Introduction: "This paper consists essentially of a) a bibliography, b) an author index, and c) an index of the subject matter of the bibliography. While the primary objective is to focus on vacuum measurement, it was believed essential to include in the bibliography articles on vacuum technology in some measure accessory or essential to vacuum measurement. For maximum usefulness, an index of the subject matter of the references has been prepared. The abstract publications listed in the previous paragraph have been freely drawn upon in preparing the bibliography."