English airplane construction is presented with a particular emphasis on metal construction techniques. Steel rib and fuselage construction are discussed as well as the use of duralumin in construction.

"Although all constructors in Germany use duralumin quite frequently, and prefer cold riveting exclusively for permanent (nondetachable) connections of individual structural components, their methods and equipment are very diversified. The differences are due to a great extent to the diversity of structural types and to the special shapes of the individual subassemblies. The results is that different manufacturers have developed totally different riveting methods, as well as entirely different working methods" (p. 1).

This report includes descriptive material on rivet inspection, types of rivets and sizes. Tabular data on shearing strength of rivets at failure, ultimate shear of various rivets, tensile tests of rivet plate, and tensile strength values of riveted joints are provided.

This report includes strength of riveted joints in duralumin, descriptions of test procedure and results of tests. Tabulated data includes: curshing strength by failure for various conditions, shearing strength of hole edge zone in direction of tearing, tearing strengths of plates weakened by rivet holes, and enlargement of holes at beginning of break.

Tests were made to determine the crushing strength of a riveted joint, in order to define the difference in crushing stregth between a strictly bolted joint and a riveted joint. The object was to tabulate the crushing strength by failure on various plate thicknesses for a one-rivet double-shear riveted joint.

In this mathematical investigation, made in collaboration with Dr. Wilhelm Schmidt, we interpret the temporary change (due to some disturbance) in the quantities which define the position of the airplane while in a flat spin. We further examine the effect of this change, of the means resorted to to produce the disturbance, and thus reveal the expedients available for recovering from a flat spin.

This paper presents a relative determination of the wrinkling of a plate wall beam with variable number of supports and methods of attachment. The discussion is based entirely on tests with extensometer readings and number of wrinkles, with complete web and with cutout sections. The author notes that the number of corrugations increase with added stress, keeping constant edge spacing.

"The effect of a slotted wing depends essentially on the fact that a secondary flow branches off from the main flow and passes to the suction side of the profile. It is thus possible to delay the separation greatly and increase the lift. The practical aspect of the slotted wing is less known in Germany, especially the results obtained during the last three years since the introduction of the 'auto control slot'" (p. 1).

"For some time the D.V.L. has been investigating the question of applicability of Handley Page slotted wings to German airplanes. Comparitive gliding tests were made with open and closed slots on an Albatros L 75 airplane equipped with the Handley Page "auto control slots." This investigation served to determine the effect of the auto control slot on the properties and performances of airplanes at large angles of attack. The most important problems were whether the angle of glide at small angles of attack can be increased by the adoption of the auto control slot and, in particular, as to whether the flight characteristics at large angles of attack are improved thereby and equilibrium in gliding flight is guaranteed even at larger than ordinary angles of attack" (p. 1).

The method of riveting by forming the closing head under increasing pressure or by a series of hammer blows is investigated. The question as to the best edge distance, i.e. that distance from the rivet center to the plate edge below which it is unadvisable to go and, at the same time useless to go beyond, was examined. The slippage of plates which occurs under the effect of a certain stress, does not completely disappear on unloading.

Relative altimetry is of great importance for increasing the safety in aerial transportation, because it makes possible safe flying at night, by poor visibility, and when landing. Among the instruments of this type is the Behm sounder, which operates on an acoustic principle. Acoustic altimetry in general and the Behn sounder, in particular, are covered in this report.

A counter-propeller is a fixed propeller smaller than the main propeller, mounted either fore or aft of the latter and performing the function of changing the direction of motion of the fluid filaments, which naturally tend to adopt a helicoidal form. This paper presents a consideration of the real advantage of counter-propellers on aircraft and the best shape of the blades. First, the author determines the possible energy absorption by the tangential increments. This process will be facilitated by the examination of the polygons of the relative velocities fore and aft of the generic section, of radius r, of one of the blades of the propeller.

This report presents a thorough investigation of the functioning process and injection and combustion characteristics of ignition-chamber engines.

The suggestion for the measurements collected in this report was prompted by the results of spinning experiments. For the theoretical spinning investigations there was a lack of data on lateral force, yawing, and rolling moment of airplanes.

This report deals with the measurement of the velocity distribution of the air in the velocity of a plate placed parallel to the air flow. The measurements took place in a small wind tunnel where the diameter of the entrance cone is 30 cm and the length of the free jet between the entrance and exit cones is about 2.5 m. The measurements were made in the free jet where the static pressure was constant, which was essential for the method of measurement used.

"This report is intended to furnish bases for load assumptions in the designing of airplane controls. The maximum control forces and quickness of operation are determined. The maximum forces for a strong pilot with normal arrangement of the controls is taken as 1.25 times the mean value obtained from tests with twelve persons. Tests with a number of persons were expected to show the maximum forces that a man of average strength can exert on the control stick in operating the elevator and ailerons and also on the rudder bar" (p. 1).

The main purpose of this report is to give references to literature on the subject of end fixation of airplane struts and also to furnish the constructor with a general survey of the simplest methods for estimating the end-fixation effect.

The accuracy of the instruments used for flight test measurements has been inadequate so a new series of tests were commissioned with the development of an accurate elevator setting recorder.

"The following load assumptions shall be taken as the basis of the strength calculations. Certain definite load conditions (e.g. of flight, control, landing and transport) shall be assumed. The loads shall be assumed to be safe loads, constant or only slowly variable, and the inertia forces due to elastic deformation are accordingly disregarded. The external forces, the force of gravity and the inertia forces on the whole airplane shall produce a condition of equilibrium" (p. 1).

The tapered wing shape increases the lift in the middle of the wing and thus reduces the bending moment of the lifting forces in the plane of symmetry. Since this portion of the wing is the thickest, the stresses of the wing material are reduced and desirable space is provided for stowing the loads in the wing. This statically excellent form of construction, however, has aerodynamic disadvantages which must be carefully weighed, if failures are to be avoided. This treatise is devoted to the consideration of these problems.

Previous investigations on the strength characteristics and structure of wood in construction are analyzed and a method of representation is developed suitable for the use of designers.

This report presents a review of German light airplane construction. Some of the topics discussed include: engines, fuselages, wings, landing gear, and other mechanical parts.

The present investigation is an endeavor to express the jolting stresses, designated as landing impacts, undergone by seaplanes in landing and taking off from rough water, as functions of specific factors, in order to enable the evaluation of empirically obtained results and thus acquire theoretical data for the construction of seaplane floats and hulls.

From Summary: "The present report is, in the first place, a compilation of the test results now available from wing tests up to angles of attack 90^o. Reports are also given of tests with monoplane and auxiliary wings in the Gottingen wind tunnel for the purpose of plotting a steadily rising curve of the normal force as a foundation of the angle of attack."