In order to perform the various experiments with a bubble chamber, a high intensity flash tube is used. This report briefly describes the power supplies designed and constructed to power these lamps.

The power supplies designed and constructed to power high intensity flash tubes used in bubble chamber experiments are briefly described and are accompanied by a schematic diagram of the layout. (D.C.W.)

These procedures are intended to be used for the initial operation of the expansion system and serve as a basis for a more complete and revised form to be written once operating experience has been gained. An attempt has been made to offer a logical and systematic presentation to facilitate operation and maintenance of the system by the operating personnel. Thus, the sequence of valve actuations has been presented in matrix and check list form to minimize errors; this also has the advantage of making it easier to adapt certain expansion system procedures to programmed control by a process control computer.

Prior to assembly into the 80" bubble chamber, the expansion system was subjected to a series of tests to check piston dynamics and gain information on the reliability of the various components. Furthermore, the rest provided operating personnel with the opportunity to become familiar with the operation and maintenance of the expansion system. Two separate tests were performed with the apparatus that was located at the north end of the AGS experimental area; one during the week of Oct. 15 and the other during the week of Nov. 12. The system was run with helium gas supplied from AGS compressor room and the piston was operated at room temperature.

One of the major, as well as first, decisions which must be taken on a large chamber is to decide on the direction of the magnetic field, i.e., vertical or horizontal. Either alternative has advantages and disadvantages ad it is the intention of this note to discuss these features.

The aim of this series of experiments was to evaluate the existence of abscopal effects of irradiation. No attempt was made towards the elucidation of mechanisms. Very early in the history of radiological research it was noticed radiation produces both local and general effects involving the entire body. Gauss and Lembcke introduced the term "Roentgenkater" (radiation sickness). They ascribed these "General Effects" to the circulation of toxic substances released from cells that disintegrated following irradiation.

The absolute yield of the ferrous sulfate oxidation reaction, under the influence of ionizing radiation, has been determined. A polystyrene, parallel plate ionization chamber, filled with argon, nitrogen, or air, was used to measure the energy absorbed per unit volume of the solution through the application of the Bragg-Gray principle. The ionization current was extrapolated to zero chamber spacing. In related experiments the average ionization potential of polystyrene was determined to be 34.3 ev by comparison with argon and nitrogen. The G value obtained in this experiment using the three gases was 15.9 ± 0.5 ions/100 ev, in good agreement with calorimetric and cathode-ray bombardment measurements.

Human iron metabolism has been extensively studied in the past twenty-five years with the radioisotopes iron⁵⁵ and iron⁵⁹. Before the availability of the whole body counter, however, iron absorption studies were performed by the indirect methods of fecal assay of unabsorbed radioiron, and estimation of red cell incorporation of absorbed tracer. The few long-term excretion studies performed required numerous assumptions, since human iron excretion was less well understood. Whole body counting provides a simple and accurate method of measuring the total body retention of administrative tracer iron⁵⁹, thus making absorption and subsequent excretion determinations possible with a single radioiron study. The energetic gamma emissions of iron⁵⁹ permit ready external detection with small quantities of isotope, Normal radioiron distribution is uniform throughout the circulating red cell mass and thus minimize geometry influences on the counting efficiency, 0nly the 45.1 day half-life of iron⁵⁹ limits long term iron turnover studies. Measurements of iron⁵⁹ absorption and long-term body turnover have been under way at Brookhaven National Laboratory for over two years. The present paper outlines some of the results of these studies, and discusses some implications of the method.

The study of the interaction of the electromagnetic field with nuclei has proved very fruitful for the elucidation of many details of nuclear structure. The γ-ray transitions observed in either absorption or emission can be divided into three classes, depending on whether the matrix elements of the transition are (1) much larger, (2) approximately equal or (3) much smaller than those expected for single proton transitions which are usually taken as a norm. In class (1) we find (a) the broad transitions leading to the "giant resonances" in the nuclear photo-electric effect, and (b) the "fast" transitions between low lying states, especially for even-even nuclei far removed from magic numbers. The large matrix elements and the regular dependence of their magnitude on the atomic weight speak for cooperative phenomena in which many nucleons or the nuclei as a whole are involved. In class (2) we find the much studied M4 transitions which give strong support for the single particle model; they have rather uniform matrix elements. Some finer points remain to be understood, especially why some odd nuclei do not show the expected ratio for |M|^2 of ~ 2:1. The transitions belonging to class (3) require further selection rules and …

To aid in planning Brookhaven's future program in high-energy physics, we have just completed a summer study on possible experimentation with super-high-energy accelerators and with storage rings. I should like to review a few of our conclusions and to describe an experiment on coasting beams in progress at Brookhaven. First, however, to provide background for this review, I shall present a short history of the past year. During 1962, many proposals were submitted to the United States Government for design or construction of accelerators for energies above 700 Mev. In order to decide which of these proposals should receive support, an advisory panel was set up under the chairmanship of Professor Norman Ramsey of Harvard. Last April this panel submitted its report. During last April the Brookhaven Laboratory received an official authorization to proceed with studies aimed at the recommended storage rings and super-energy accelerator.

The magnetic field of the AGS ring can contain particles of magnetic rigidity about 34 Bv/c. This includes not only protons of kinetic energy 33 Bev, but also 32 Bev deuterons, 64 Bev alpha particles, and conceivably heavier nuclei such as 188 Bev carbon nuclei. It will be shown in this paper that such nuclei can be injected and accelerated in the AGS if some rather small modifications are made in the injection and acceleration systems. What physics could be done with such beams? Several types of experiments may be suggested. In the first place, since the deuteron is a rather loosely bound combination of a neutron and a proton, it is likely to break up when it hits a target nucleus (stripping reaction). In a considerable fraction of the collisions the neutron will go straight on with essentially unchanged energy (half the deuteron energy). Therefore, with an internal target bombarded by 30 Bev deuterons one should obtain an intense, rather well collimated and monochromatic beam of 15 Bev neutrons in the forward direction.

Maintenance of polarization of polarized protons in a linear accelerator is known to be feasible. Circular accelerators present a different problem, and the investigation of the interaction of orbit dynamics and particle polarization in general is undertaken. The equation of motion of the spin vector of a charged particle in a magnetic field as formulated by Bargmann, Michel, and Telegdi is utilized in the study of depolarization for several accelerators. High values of depolarization are obtained, and means for avoiding such depolarization are suggested. (D.C.W.)

In this report we present solutions of the design problem in which a system of quadruple lenses is required to carry a particle beam from given focal lines in the x and y planes to other given focal lines. Particular attention will be given to the case of the anastigmatic lens system which takes a beam from one focal point to another focal point. Since the general problem is almost impossibly complicated a simplification is introduced by breaking the lens system into two parts. The first part of the lens system is required to bring the initial beam to the state where it is parallel to the z axis in both planes. The second part carries the initially parallel beam to the required final condition. Each part will involve two quadrupoles so that the complete system will consist of four quadruples; usually, however, the field gradients in the second and third quadrupoles can be made identical so that those quadrupoles can be combined into one and the system becomes a three quadrupole system. The configuration of the lens element will be as shown in the figures below. These figures indicate also the general character of the beam path in the …

The so-called Fluoride Volatility Processes refer to several proposed non-aqueous methods of processing irradiated fuel elements. In each of these methods, the uranium is fluorinated to UF6 and then decontaminated by distillation. One of those methods, involving the direct fluorination of the uranium by bromine trifluoride (BTF), has been under investigation at BNL since 1950. In 1952, it was demonstrated at BNL that uranium, as UF6, could be satisfactorily decontaminated by distillation in small-scale pilot plant equipment; end in 1953, BNL undertook the job of determining the technical feasibility of a continuous dissolver on a pilot-plant scale. The reason for the project was that the economic superiority of the process seemed to depend upon its amenability to continuous operation.

We consider here the accuracy of relaxation lengths measured during the water-uranium lattice experiments. Since such an analysis for all measurements would take a great deal of time, we have applied it to just one lattice. This one (2:1 water-to-metal ratio) was chosen completely at random.

This technical report describes the toxicity observations on mice of varying borate-glucose molar ratios and relative potencies (p) (4) for the pentaborate and tetraborate drug. This report outlines the methods and results of this experiment and provides a discussion of the results.

The rapid advances in many technologically important areas have not only served to accentuate the increased demands for high temperature metals and ceramics but have necessitated a more through knowledge of their physical properties when exposed to high temperature service. Toward this latter end, the use of X-ray diffraction has proved an invaluable tool in providing data of regions of thermal stability, expansion coefficients, solid solubility limits, and phase transformations by direct examination at temperature. Since this Laboratory has for some time now been engaged in the study of refractory nuclear materials, it was thought desirable to employ and possibly extend this technique to temperatures ranging up to 3000°C. This communication will describe the equipment developed for this purpose, with experimental results to be described in subsequent publications.

In the memorandum entitled "Stored Energy in BNL Reactor Graphite", dated February 25, 1953, there is described an experiment conducted by Gurinsky's group to determine the energy per gram of irradiated graphite released in a 200°C anneal. Similar experiments were subsequently conducted by W. Kosiba, differing from the original in two particulars: a) Instead of two graphite samples, one normal, and one irradiated, Kosiba used only an irradiated sample which he heated first to release the stored energy, and then again after the energy was released. In this way, he obtained time against temperature curves for both normal and irradiated graphite from the same sample. (These curves are graphed for each run in Figs. 1 thru 5.) b) The vycor tubing used in the original experiment was not used by Kosiba. Five runs of this experiment were selected, Runs 4P, 13, 36, and 40 at furnace temperatures of 200°C, and Run 45 at a furnace temperature of 400°C.

Since the discovery of the Straub and Feuer as well as Laki et al. that ATP bound to G-actin is transformed to ADP and inorganic phosphate during polymerization of actin (1, 2), it has become increasingly clear that the chemical changes in the nucleotide are related to the change in the physical state of the protein. Barany, Biro, Molnar and Straub have shown that highly purified actin preparation free of any enzyme which would use ATP, ADP or AMP as a substrate still catalyze the breakdown of ATP (3) thus supporting the original idea that the ATP to ADP transformation is related to the globular to fibrous transformation of the actin protein itself. Mommaerts was the first to show that the ADP formed during polymerization remains bound to F-actin and Ulbrecht et al. while extending Mommaert's finding on exhaustively purified actin preparations have shown that the P1 formed during polymerization is not bound to F-actin. The stoichiometry of the splitting and the tightness of binding of the ADP lead inevitably to questions in regard to the position of bond breaking during the hydrolysis and to the nature of the forces involved in the tight binding of ADP to F-actin. To …

Many of the most important properties of the clay minerals are in reality properties of the complex systems clay-water. Since water enters directly into the equilibria between clays and ionic solutions, determination of the water content of the minerals under specified conditions are an obvious necessity in any complete study of these equilibria. A formulation of the thermodynamics involved indicates what information is necessary and how to take it into account. Furthermore, recent results of others indicate that a knowledge of the water adsorption isotherms can profitably be used to help elucidate the structures of the clay minerals.

We have made absolute radiochemical measurements of the yields of Kr-85 and Xe-133 in the thermal neutron fission of U-235, and of Kr-85 in the thermal neutron fission of Pu-239. For Kr-85 in U-235 fission, the mean of eight measurements gives the ratio, X/T, of fission yield to half-life: X/T = 0.0253%/yr; σ = 1.59%; 99-1 error of the mean = 2.41%. For Kr-85 in Pu-239 fission, the mean of three measurements gives X/T = 0.0092%/yr; σ = 4.3%. Here σ is the standard deviation of a single measurement expressed as percent of the mean. If the Kr-85 half-life is 10.8 (±4%) yr, the yields are U-235 fission: X = 0.273% (±5% of X). Pu- 239 fission: X = .0994%. The error estimate in the U-235 yield is an accuracy estimate compounded of estimated accuracies of 3% in the X/T value and 4% in the half life. For Xe-133 in U-235 fission, the mean of five measurements gives the yield: X = 6.62%; σ = 0.095% of X; accuracy = ±3% of X. The accuracy estimates are based on a detailed investigation of the possible sources of error in the fission counting, the chemical procedure, and the beta-counting (gas-phase proportional …

The potassium-argon age of the Sikhote Alin iron meteorite has been determined. The value is 1.7 + 0.2 x 10⁹ years. Previous lead data suggest an age of 4.6 x 10⁹ years . The date of solidification may be the sum of these two ages.

The scope of the AGS complex has expanded rapidly during the three years since an accelerated beam was first obtained. Demand for research time far exceeds the amount available although facilities have been much increased. At the same time, experiments are being designed which are more complicated than previous ones and which make more stringent demands on the accelerator and on its auxiliary equipment. There is a continuous trend of experiments to particle beams of greater momentum, as the experimental techniques are refined. This use of increased momentum means that larger areas are required for the apparatus and that more power is necessary for the magnetic optics. All beam-sharing at the AGS is done by multiple use of each accelerated pulse because our experience indicates that pulse-by-pulse beam-sharing is relatively inefficient. (Expansion chambers have seldom been used at the AGS.) The problems of scheduling experiments becomes increasingly complex since combinations must be found satisfying the criteria: maximum number of experiments to run simultaneously; minimum downtime to be taken for rearrangement between successive experimental arrays

In wet sectioning of celloidin embedded tissue it is necessary to maintain a layer of alcohol on the knife and on the surface of the block. The alcohol acts as a lubricant and also prevents drying of the block. The application of alcohol may be done by hand or mechanically. To apply the alcohol by hand while operating the microtome slows down the cutting operation, unless the operator is ambidextrous. In addition, stopping and starting the knife to apply alcohol results in an extensive wasting of tissue due to half-sections and sections of uneven thickness. Unless the knife can be kept moving smoothly at a constant rate the result will be sections of non-uniform thickness regardless of the setting on the microtome.