From foreword: "This report is a comprehensive overview study of potential alternative methods for long-term management of high-level radioactive waste...Disposal in terrestrial locations."

From foreword: "This report is a comprehensive overview study of potential alternative methods for long-term management of high-level radioactive waste."

Quarterly progress report on a project to test the radiation effects on metallurgy.

From abstract: "...limited study work was performed on the conceptual design of the proposed fast flux test facility and information was obtained in important areas of supporting technology."

From introduction: "This paper describes a sequence for analyzing the effects of ground water flow on waste transport in natural soils."

From introduction: "In June, 1963, a geophysical research program was conducted at Hanford to determine the feasibility and desirability of using seismic methods in geohydrologic studies. Detection and delineation were desired of seven different geological features that in some sites affect the movement of liquid radioactive wastes discharged to the ground."

The experiments described in this report were performed for two purposes: (1) to find a chemical, or combination of chemicals, that would be effective for inhibiting corrosion of steel in static portions of the Hanford water systems, and (2) as screening tests to select candidate mixtures for further testing to replace sodium dichromate as the inhibitor of aluminum and steel corrosion in the Hanford single-pass reactor cooling water.

From introduction: "...a logical system has been developed to yield rapidly the indexing of a given powder pattern by using an electronic computer."

From introduction: "This document discusses the design, fabrication, assembly, and testing of a second generation shim rod assembly, and testing of a second generation shim rod assembly prototype for use in the Plutonium Recycle Test Reactor."

Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."

Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."

Abstract: "The ductility of Type 310 stainless steel T-joints brazed with GE-62 brazing alloy was measured at room temperatures 1200, 1650, and 1800 F. The measure of ductility was taken as the plastic axial strain required to crack braze fillets in T-section tensile specimens. At elevated temperatures, the ductility of as-brazed joints approximated that of the stainless steel, but at room temperature the brazed joints had only one-tenth the ductility of the base metal. Annealing for 16 hr at 1800 F in air was found to triple the room-temperature ductility of the brazed joint."

From introduction: "This investigation was undertaken with the general objective of determining whether uranium core could be sheathed with aluminum by an extrusion-cladding process. The ultimate objective of this work was to determine the feasibility of extrusion cladding flat plates of uranium."

Abstract: "Aluminum-clad nickel-plated uranium is corrosion resistant in boiling water. Samples with intentional defects in the aluminum-nickel clodding layers, after testing for more than 300 hr. showed no sign of rapid failure. The study of electroplated metals on uranium for aluminum cladding has defined the effects of several processing variables on the corrosion resistance. The quality of the uranium and the quality of the aluminum-nickel bond were important. Heat treatment and vacuum outgassing of the nickel-plated uranium prior to aluminum cladding were beneficial, and minimizing the amount of air present in the hot-press assembly was desirable. Variation in the steps for electroplating on uranium did not affect the corrosion resistance of aluminum-clad uranium."

This report covers the progress made on an intensive program to develop and evaluate UO2 as a possible fuel element for the PWR.

In studies of the fabrication of fuel subassemblies for the supercritical-water reactor, the limited ductility of stainless steel-UO₂ fuel sheet made the fabrication of corrugated-flat-plate-type subassemblies impractical. A fabricable MTR-type assembly, 5/8 in. square and 30 in. long, was developed. Methods for edge cladding fuel sheet were developed and a brazing alloy, GE-75, was found to be corrosion resistant in supercritical water.

Abstract: "Thirty-four uranium ingots containing controlled amounts of carbon, nitrogen, and Mgl2 slag were cast, rolled, and examined to investigate the relation between these impurities and the quality of the rolled rod. Carbon in concentrations up to 1400 ppm and nitrogen up to 170 ppm, either singly or in combination, had no significant effect on the number of defects observed in the rolled rod. The quality of the rods, however decreased with increasing amount of slag necessary to cause observable differences in the rod could not be detected on analysis, but was visible in the microstructure."

A report intended to aid in the evaluation of solid-state bonding techniques for cladding natural-uranium fuel-element cores with aluminum, tensile specimens which are 1/4 in. in diameter and 3 in. long.

From Abstract: "The heat treatment and mechanical properties of four zirconium alloys...were investigated. Tensile, hardness, Jominy end-quench, and metallographic data constitute the basis for much of the report. Other data reported include the results of high-temperature creep, tensile, hardness, cold rolling, thermal-cycling, and dynamic-modulus tests." A connection is made between the behavior of these four alloys and more alloys in the zirconium-uranium system.

This report follows a preliminary study on uranium migration in pressed and sintered UO2-bearing bodies based on MoSi2 or Al2O3.

Abstract: "Sound, fabricable ingots of thorium were produced by triple are melting of electrolytic thorium. Consumable electrodes were fabricated by tack welding of cold-pressed and vacuum-sintered bars of the granular thorium electrodeposited from a molten-salt bath. The hydrogen content of the electrodeposited material was reduced from 80 to 4 ppm by vacuum sintering at 1250 C at pressures below 1 x 10-(-3) mm of mercury. Both sodium and chlorine content were reduced during melting; sodium from 250 to 25 ppm and chlorine from 1000 to 30 ppm. Oxygen and HCl acid-insoluble contents increased during sintering and melting. Oxygen content increased from 0.35 to 0.50 w/o and HCl acid-insoluble content from 0.8 to 4.0 w/o. A starlike includion revealed by metallographic examination of the as-cast thorium was identified as ThO2."

Abstract: "Refinement of grain size of the base uranium-chromium eutectic alloy (uranium-5 w/o chromium) by ternary additions is discussed. Thirteen additions to the base alloy were investigated, and three additions were found to exhibit worthwhile grain-refinement tendencies. The three alloys, uranium-5 w/o chromium-0.2 w.o molybdenum, uranium-5 w/o chromium-0.2 w/o germanium, and uranium-5 w/o chromium-0.2 w/o niobium, were heat treated to produce final grain-size structures of between 0.015 and 0.033 mm."

The following report focuses on an investigation made to determine if vacuum melting was an absolutely necessary step in the metallurgical process of melting and casting uranium.