Abstract: "The protection of thorium in hot water was studied. Copper electrocladding on thorium offers promising protection against hot water. The corrosion of thorium in 95 C water was reduced appreciably by a thorium phosphate film. The results of this abbreviated investigation offer a basis for the development of a method of protecting thorium at elevated temperatures in corrosive media."

This report has two parts to it discussing mineralogical examination of pitchblende concentrates and nitric acid digest residues. Part I gives the results of a cursory examination with the petrographic microscope of samples of pitchblende concentrates and residues to see if there is a relationship between the mineral composition of the samples and the filterability of the residue. Part II gives a revaluation of the data in Report BMI-241 on the mineral composition of two residues from the nitric acid digestion of pitchblende concentrates at the Rallinckrodt Chemical Works.

From abstract: "The composition of vapors from aqueous nitric acid solutions boiling at 200 mm mercury total pressure is established for solutions containing between - and 67.5 w/o nitric acid. The volatility characteristics of low concentrations of chloride in the same concentration range of nitric acid have been measured in solutions boiling at 200 mm mercury. The effects of chloride concentration and pressure of boiling are evaluated. A spectrophotometric method of the determination of chloride in nitric acid solutions is described."

Report discussing experiments on the interaction of neutron-absorber materials and metal matrix materials used in the fabrication of control rods, such as "boron, cadmium, and some of the rare-earth elements such as gadolinium and europium...In order to evaluate the reactions that might occur during fabrication and use, experiments were carried out in which combinations of the various control materials were heated in intimate contact with the several matrices at elevated temperatures."

This report discusses tests on the preparation and cladding of hot-pressed and pressure-bonded titanium-boron. It explores the properties of titanium-boron as a control material in reactors.