From introduction: "This investigation was undertaken with the general objective of determining whether uranium core could be sheathed with aluminum by an extrusion-cladding process. The ultimate objective of this work was to determine the feasibility of extrusion cladding flat plates of uranium."

From introduction: This report covers an investigation of solid-state bonding as a technique for aluminum cladding uranium plates of 3 by 0.180-in. cross section in lengths up to 14 ft.

Abstract: "Aluminum electroplating was studied in a search for new methods of cladding uranium fuel elements. Uranium electroclad with 12 mils of aluminum over a 0.5-mil (or nickel plus copper) electroplate resisted corrosion for more than 100 hr in boiling water. This quality of protection was effected by hot pressing the electroclad uranium with 5.1 tons per sq in. for 5 min at 950 F. The electroclad uranium with hot-pressed samples paralleled those of later experiments with hot-pressed wrought aluminum claddings on uranium. In both cases, the uranium was electroplated with thin (0.5 mil) layers of metals to prevent aluminum-uranium diffusion, to aid bonding, and to assist in corrosion protection. This aluminum electroplating study helped to define the importance of the intermediate coating between the aluminum and the uranium, the effect of good bonds between the various layers, and the effects of hot pressing in protecting uranium with an aluminum cladding."