Report issued by the Argonne National Laboratory discussing meteorological data collected between 1952 and 1953. Wind, temperature, pressure, and precipitation studies are presented. This report includes tables, illustrations, and a map.

Report issued by the Argonne National Laboratory covering the quarterly report from the Reactor Engineering Division. A summary of reactor programs, designs, development, and experiments are presented. This report includes tables, illustrations, and photographs.

This technical report is concerned with a theoretical investigation of the variation of the regeneration factor [gamma] in a Th232 - U235 thermal reactor. The abundances of the significant isotopes in the thorium-uranium cycle have been derived as a function of irradiation time at constant reactor power. The change in [gamma] as a function of irradiation time at constant power was calculated for combinations of enrichment and resonance escape probability considered likely to exist in a thermal reactor. The effect upon [gamma] of the the absorption cross section of 91Pa233 and of the fission products has been shown.

Report issued by the Argonne National Laboratory discussing the Experimental Breeder Reactor (EBR). Descriptions and methods of the EBR are presented. This report includes tables, and illustrations.

This quarterly report discusses ongoing research and experiments at Oak Ridge National Laboratory in the Metallurgy Division. This report discusses water cooled reactors, liquid metal cooled reactors, reactor development metallurgy, basic metallurgy, applied metallurgy, and aqueous corrosion.

Progress is reported on (1) experimental breeder reactor program, (2) solvent extraction, (3) fluoride volatilization separation process, (4) elevated temperature separations, (5) denitration of uranyl nitrate in a fluidized bed, (6) development of analytical techniques, (7) processing and utilization of radioactive wastes.

Progress is reported on (1) direct cycle boiling reactor studies, (2) solvent extraction, (3) fluoride volatilization separation process, (4) elevated temperature separations, (5) fluidization studies, (6) development of analytical techniques, (7) processing and utilization of radioactive wastes.

Report issued by the Argonne National Laboratory discussing progress made on reactor development. Progress made on the core, pressure vessel and shield, and the power plant are presented. This report includes tables, and illustrations.

In the a study of plutonium production, the analytical solutions of the various isotope production equations are difficult and time consuming when spatial variation of the flux is considered. In an effort to reduce the time and labor required to determine the integrated production of a given thermal reactor, a graphical method of analysis is presented. The method is based on the assumption that the reactor may be divided into a relatively small number of regions such that the flux in each of these regions may be assumed constant. The production of the given isotope for each region is then read from the appropriate graph. The total production is obtained by adding the productions of all the regions.

It was demonstrated by differential thermal analysis (DTA) that: 1. Catastrophic amounts of energy can be stored in diamond. 2. Even at low irradiations, the release takes place over serval hundred degrees, indicating a spectrum of activation energies. 3. At higher irradiations, the stored energy release is considerably less than the increased energy contents and seems not to have been completely released even at the highest temperatures reached. 4. There is some indication of an increased heat capacity below the temperature of stored energy release. It was shown by DTA that large amounts of energy can be stored in silicon carbide on irradiation. The release was found to be spread out over a greater range of temperatures than in diamond and indicated a larger and higher group of activation energies. Catastrophic release was not achieved. The amount of stored energy released over the range of temperatures used was 140 cal/g in a sample irradiated in a water-cooled test hole at HEW for an exposure of 265 Mwd/aT.

A fuel element assembly in which a uranium slug is bonded to an impact extruded aluminum can by means of aluminum-silicon eutectic, and in which the can is capped with a thin aluminum disc, brazed and welded to the can, may contain,(a) imperfections common to brazed and welded metal sections, and (b) inhomogeneities arising from oxidation of uranium, and alloy formation between uranium, aluminum and silicon.

This technical report describes experimental nuclear physics, mass spectroscopy, crystallography, experimental reactor physics, theoretical physics (general), reactor theory and electronic digital computers.

Concurrently with the production of canned uranium slugs for pile operation there arises the problem of nondestructive testing so that no slug which may fail structurally during operation be placed in the pile. The ultimate goal of any such testing program is to devise nondestructive testing methods which will eliminate defective slugs. A secondary goal of the testing program is to learn as much as possible about the construction of the canned slug so that the mechanisms of failure can be understood. Radiography, an increasingly useful nondestructive test method, offered one possible way of investigating this area.

Experiments performed by the Laboratory with the Borax Reactor at the National Reactor Testing Station have demonstrated that a boiling reactor possesses inherent safety characteristics which have not previously been included in the estimation of reactor hazards. Other operating characteristics of Borax were also sufficiently attractive to justify the development of boiling reactors for package power and central station power plant applications. Accordingly, a proposal was made to the Atomic Energy Commission that Argonne design, construct and operate a pilot-scale boiling reactor (BER) as part of the Commission's five year program for development of power reactors. Tentative approval for this project has been granted. The primary objective of the BER is to establish the feasibility of operating a boiling reactor in conjunction with a turbine generator on a scale which can be extrapolated to large sizes. A preliminary evaluation of hazards is hereby submitted for the purpose of determining site requirements for a 20 mw reactor of this type. Because the construction of the reactor would be expedited and its usefulness as an operating experiment greatly enhanced, it is suggested that the reactor should be constructed at the DuPage site of the Laboratory. If the inherent features of safety of …