Testimony issued by the Government Accountability Office with an abstract that begins "Over the past 25 years, the number of defined benefit (DB) plans has declined while the number of defined contribution (DC) plans has increased. Today, DC plans are the dominant type of employer-sponsored retirement plans, with more than 49 million U.S. workers participating in them. 401(k) plans currently cover over 85 percent of active DC plan participants and are the fastest growing type of employer-sponsored pension plan. Given these shifts in pension coverage, workers are increasingly relying on 401(k) plans for their pension income. Recently, policy makers have focused attention on the ability of 401(k) plans to provide participants with adequate retirement income and the challenges that arise as 401(k) plans become the predominant retirement savings plan for employees. As a result, GAO was asked to report on (1) challenges to building and maintaining of savings in 401(k) plans, and (2) recent measures to improve 401(k) participation and savings levels."

The U.S. Department of Energy’s (DOE) commitment to assuring the health and safety of its workers includes the conduct of epidemiologic surveillance activities that provide an early warning system for health problems among workers. The Illness and Injury Surveillance Program monitors illnesses and health conditions that result in an absence of workdays, occupational injuries and illnesses, and disabilities and deaths among current workers.

For reporting year 2008, Los Alamos National Laboratory (LANL) submitted a Form R report for lead as required under the Emergency Planning and Community Right-to- Know Act (EPCRA) Section 313. No other EPCRA Section 313 chemicals were used in 2008 above the reportable thresholds. This document was prepared to provide a description of the evaluation of EPCRA Section 313 chemical use and threshold determinations for LANL for calendar year 2008, as well as to provide background information about data included on the Form R reports. Section 313 of EPCRA specifically requires facilities to submit a Toxic Chemical Release Inventory Report (Form R) to the U.S. Environmental Protection Agency (EPA) and state agencies if the owners and operators manufacture, process, or otherwise use any of the listed toxic chemicals above listed threshold quantities. EPA compiles this data in the Toxic Release Inventory database. Form R reports for each chemical over threshold quantities must be submitted on or before July 1 each year and must cover activities that occurred at the facility during the previous year. In 1999, EPA promulgated a final rule on persistent bioaccumulative toxics (PBTs). This rule added several chemicals to the EPCRA Section 313 list of toxic chemicals …

This report includes a table which provides access to names and contact information for CRS experts on policy concerns relating to swine influenza A virus (H1N1). Policy areas identified include: Identification, diagnosis, and surveillance of the virus; Treatment and prevention: antiviral drugs (Tamiflu, Relenza) and vaccines; Declarations of emergencies; Official plans and organizational responsibilities; and Restrictions on travel and trade.

This report first provides a synopsis of key events, actions taken, and authorities invoked by World Health Organization (WHO), the U.S. federal government, and state and local governments.

This report describes the World Health Organization (WHO) process to determine the phase of a threatened or emerging flu pandemic, and touches on several related issues.

This report provides a brief overview of selected legal issues regarding the H1N1 influenza, including emergency measures, civil rights, liability issues, and employment issues.

This report provides a brief overview of selected legal issues including emergency measures, civil rights, liability issues, and employment issues.

PowerPoint Presentation

Testimony issued by the Government Accountability Office with an abstract that begins "The decennial census is a constitutionally-mandated activity that produces data used to apportion congressional seats, redraw congressional districts, and help allocate billions of dollars in federal assistance. In March 2008, GAO designated the 2010 Census a high-risk area in part because of information technology (IT) shortcomings. The U.S. Census Bureau (Bureau) has since strengthened its risk management efforts and made other improvements; however, in March 2009, GAO noted that a number of challenges and uncertainties remained. This testimony discusses the Bureau's readiness for 2010 and covers: (1) the delivery of key IT systems, (2) preliminary findings on the results of address canvassing and the lessons learned from that operation that can be applied to subsequent field operations, and (3) the Bureau's progress in improving its cost estimation abilities. The testimony is based on previously issued and ongoing GAO work."

Testimony issued by the Government Accountability Office with an abstract that begins "The decennial census is a constitutionally mandated activity that produces data used to apportion congressional seats, redraw congressional districts, and help allocate billions of dollars in federal assistance. A complete and accurate master address file (MAF), along with precise maps--the U.S. Census Bureau's (Bureau) mapping system is called Topologically Integrated Geographic Encoding and Referencing (TIGER)--are the building blocks of a successful census. If the Bureau's address list and maps are inaccurate, people can be missed, counted more than once, or included in the wrong location. This testimony discusses the Bureau's readiness for the 2010 Census and covers: (1) the Bureau's progress in building an accurate address list; and (2) an update of the Bureau's information technology (IT) system used to extract information from its MAF/TIGER? database. Our review included observations at 20 early opening local census offices in hard-to-count areas. The testimony is based on previously issued and ongoing work."

Fast thermal models of cell interior temperature have been developed and validation initiated. A subscale sodium battery has been received and instrumented for validation of thermal models

This report addresses the secondary aerosol is an important component of atmospheric fine particles that generally consists of organics, sulfates, and nitrates.

This Technical Memorandum (TM) summarizes the Fermilab accelerator and accelerator experiment operations for FY 2009. It is one of a series of annual publications intended to gather information in one place. In this case, the information concerns the FY 2009 Run II at the Tevatron Collider, MINOS using the Main Injector Neutrino Beam (NuMI), the MiniBooNE experiment running in the Booster Neutrino Beam (BNB), and the Meson Test Beam (MTest) activities in the 120 GeV external Switchyard beam (SY120). Each section was prepared by the relevant authors, and was somewhat edited for inclusion in this summary.

The use of existing Fermilab facilities to provide beams for two muon experiments - the Muon to Electron Conversion Experiment (Mu2e) and the New g-2 Experiment - is under consideration. Plans are being pursued to perform these experiments following the completion of the Tevatron Collider Run II, utilizing the beam lines and storage rings used today for antiproton accumulation without considerable reconfiguration. Operating scenarios being investigated and anticipated accelerator improvements or reconfigurations will be presented.

Over the last decade there has been significant progress in developing the concepts and technologies needed to produce, capture, accelerate and collide high intensity beams of muons. At present, a high-luminosity multi-TeV muon collider presents a viable option for the next generation lepton-lepton collider, which is believed to be needed to fully explore high energy physics in the era following LHC discoveries. Such a collider can offer superb energy resolution, smaller size, and potentially cost and power consumption compared to multi-TeV e{sup +}e{sup -} linear colliders. This article briefly reviews the motivation, design and status of accelerator R&D for Muon Collider and Neutrino Factory.

This report discusses the current debate over "net neutrality." While there is no single accepted definition of "net neutrality," most agree that any such definition should include the general principles that owners of the networks that compose and provide access to the Internet should not control how consumers lawfully use that network, and they should not be able to discriminate against content provider access to that network.

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

This document is a user's guide for the code Adagio. Adagio is a three-dimensional, implicit solid mechanics code with a versatile element library, nonlinear material models, and capabilities for modeling large deformation and contact. Adagio is a parallel code, and its nonlinear solver and contact capabilities enable scalable solutions of large problems. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. The Adagio 4.14 User's Guide provides information about the functionality in Adagio and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Adagio is similar to that of the code Presto [3]. Presto, like Adagio, is a solid mechanics code built on the SIERRA Framework. The primary difference between the two codes is that Presto uses explicit time integration for transient dynamics analysis, whereas Adagio is an implicit code. Because of the …

The purpose of this addendum is to graphically publish data which indicate moisture in leakage and corrosion may have occurred during heating of the tanks at the Molten Salt Reactor Experiment (MSRE) for and during hydrofluorination, fluorination and transfer of uranium. Corrosion, especially by hydrofluoric acid, is not expected to occur uniformly over the tank and piping inner surfaces and therefore is not easily measured by nondestructive techniques that can measure only limited areas. The rate of corrosion exponentially escalates with both temperature and moisture. The temperature, pressure, and concentration data in this addendum indicate periods when elevated corrosion rates were likely to have been experienced. This data was not available in time to be considered as part of the evaluation that was the focus of the report. Pressure and temperature data were acquired via the LabView{trademark} Software, while concentration data was acquired from the Fourier Transform InfraRed (FTIR) system.

In a continuing effort to examine portable methods for implementing active neutron interrogation for detecting shielded fissionable material research is underway to investigate the utility of analyzing multiple time-correlated signatures. Time correlation refers here to the existence of unique characteristics of the fission interrogation signature related to the start and end of an irradiation, as well as signatures present in between individual pulses of an irradiating source. Traditional measurement approaches in this area have typically worked to detect die-away neutrons after the end of each pulse, neutrons in between pulses related to the decay of neutron emitting fission products, or neutrons or gamma rays related to the decay of neutron emitting fission products after the end of an irradiation exposure. In this paper we discus the potential weaknesses of assessing only one signature versus multiple signatures and make the assertion that multiple complimentary and orthogonal measurements should be used to bolster the performance of active interrogation systems, helping to minimize susceptibility to the weaknesses of individual signatures on their own. Recognizing that the problem of detection is a problem of low count rates, we are exploring methods to integrate commonly used signatures with rarely used signatures to improve detection capabilities …

A high explosive pulsed power (HEPP) generator called the Advanced Helical Generator (AHG) has been designed, built, and successfully tested. The AHG incorporates design principles of voltage and current management to obtain a high current and energy gain. Its design was facilitated by the use of modern modeling tools as well as high precision manufacture. The result was a first-shot success. The AHG delivered 16 Mega-Amperes of current and 11 Mega-Joules of energy to a quasi-static 80 nH inductive load. A current gain of 154 times was obtained with a peak exponential rise time of 20 {micro}s. We will describe in detail the design and testing of the AHG.

In recent years, a team from NSTec and SNL has built a unique capability to develop microchannel plate (MCP)?based framing x-ray cameras for HEDP diagnostics. At the SNL Z facility, multistrip MCP detectors to record up to eight channels are employed in 2-D, sub-nanosecond time-resolved imaging and time- and space-resolved spectroscopy diagnostics. Progressively more stringent technical temporal resolution and response uniformity requirements have necessitated a systematic design approach based on iterative modeling of the MCP using inputs from electrical circuit characterization. An inherently large exponential dependence in MCP gain, V{sup 11.5}, has mandated a firm understanding of the applied voltage pulse shape propagating across the strip. We pioneered direct measurements of the propagating waveform using a Picoprobe{reg_sign} and developed a Monte Carlo code to simulate MCP response to compare against test measurements. This scheme is shown in Figure 1. The simulation detailed a physical model of the cascade and amplification process of the MCP that includes energy conservation for the secondary electrons, the effects of elastic scattering of low-energy electrons from the channel wall, and gain saturation mechanisms from wall charging and space charge. Our model can simulate MCP response for both static and pulsed voltage waveforms. Using this design …

This fact sheet provides an overview of the research the National Renewable Energy Laboratory is conducting to achieve net-zero energy buildings (NZEBs). It also includes key definitions of NZEBs and inforamtion about an NZEB database that captures information about projects around the world.