Monthly magazine discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

The report includes summary reports in five areas (1) High-speed computer program, (2) Switching circuit theory, (3) ILLIAC use and operations, (4) IBM 650 use and operation, and (5) General laboratory information.

The purpose of the test was to determine the neutron flux level in a BF3 counter well during the second performance of DL-S-225. The measured activity of the irradiation brass bolt was due entirely to the radioactive decay of Zn65. The thermal neutron flux in the BF3 counter well during the second 1000 hour run was calculated to be 2.5 x 10(9) neutrons/cm2 sec.

The report covers work performed during the period September 1, 1959 through September 30, 1959. The general objectives of the program of "Studies of Reactor Containment" are to accomplish theoretical and experimental investigations of the loads to which external containment structures for nuclear reactors are subjected in the vent of a violent incident at the reactor core, the evaluation of methods of reducing that loading, and the study of the response of and design criteria for external containment structures as a result of such loading. Progress of technical effort during the report period is summarized for each of the eight tasks of the program.

The progress report covers the work carried out during the first year 1958-59 in the department of metallurgy at M.I.T. under the supervision of Professors John T. Norton and Robert E. Ogilvie. A brief summary of the work that has been completed and in some cases still continuing is given. The work has been listed under the following general headings: (1) Diffusion studies in the uranium-niobium system, (2) X-ray detection of cladding defects, (3) Precision X-ray stress analysis of uranium and zirconium, (4) Magnetic studies of Fe3O3 single crystals, (5) Crystal structure studies of yttrium compounds, (6) Structural relationships in ZrFe2-ZrCr2 system.

A commercially available electronic high vacuum pump has bee tested on various types of mass spectrometers used at the Oak Ridge Gaseous Diffusion Plant. Considerable savings in operating and maintenance costs can be realized from the use of this pump. the greatest savings result from the elimination of the cold trap required for the diffusion pump whether it is cooled by liquid nitrogen or by mechanical refrigeration. additional savings results from the fact that the pump currently is usually an adequate indication of the pressure in the spectrometer tube and that a continuously running mechanical fore pump is not required.

The purpose of the test is to determine the reason for the decreases in the liquid levels of the reference chambers serving the reactor plant remote liquid level indicators. The remote gages and the local liquid level gages agreed closely for the Reactor Plant Component Cooling Water Expansion Tank and the Coolant Discharge and Vent System flash tank and blow-off tank. There appeared to be no loss of water from the D/P cell reference chambers for these two systems over the period of the test. There was no definite indication of leakage from the Valve Operating System reference chamber, however, the differences between remote indicator readings and the sight glass readings are attributed to sticking of the ball check valve on the upper sight glass, inaccuracy of the readings and instrument error. It is recommended that he lower shut-off valve on the upper sight glass be cleaned and reopened prior to reading the sight glass to ensure that the ball check valve is not stuck in the closed position. No lead age was found in any of the level indicating systems.

Production of new surface area by fracturing of rock behind an explosive-initiated high amplitude wave is probably an important mechanism for energy absorption in the region near n explosion in rock. Explosive-initiated high amplitude pulses in cylinders of three different rocks and two concretes were studied to determine the pulse amplitude need to damage the cylinders. An average high amplitude wave velocity of half the elastic wave velocity was observed in a porous limestone. Elastic theory is not expected to apply to a wave fracturing a rock. Rapid decreases in original free surface velocity of the greywacke rock which was most thoroughly tested indicate that this rock sustained tensile stresses about a hundred times greater than its probably tensile strength for times a long as fifty microseconds.

A Lucite model of a multi-stage countercurrent hydroclone solvent extraction apparatus has been constructed and tested with Amsco-water. The diffusivity of Cs 134 tracer in aqueous chloride solution was measured to check the performance of the capillary diffusivity measuring system. The experimental data from four Druhm runs showed that 1/8in. thick graphite liners are usable for reactor temperatures above the boiling point of sodium.

Monthly newsletter of the High Plains Underground Water Conservation District No. 1, discussing the field of underground water. Topics include profiles of water conservation research, annual pre-plant soil moisture survey data, annual Winter Water Level measurement data, and information about the latest water conservation tips.

Methods for analyzing chemical impurities in sodium metal samples are presented. Chemical analysis was used to determine the following impurities: Calcium, Carbon, Chromium, Iron, Lithium, Nickel, Oxygen, Potassium, and Zirconium. Spectrographic analysis was used to determine many other impurities. Sodium samples obtained from experimental apparatus operated as part of the work being conducted for Atomics International were analyzed by these methods.

Design Test Request PR-20 Calandria Characteristics, outlined the need for experimental data concerning the performance of the calandria under transient conditions. Test data was required to confirm that the moderator dump system would drop the level the required 24 inches in less than one second. The original calandria dump chamber design was modified until the criteria was met. This information is recorded in HW-58333, Interim Report, Design Test PR-20, Calandria Characteristics, which lists the drop for the first 24 inches only.

The Atomic Energy Commission has assigned the Hanford Atomic Products Operation the responsibility of providing the technology and facilities for the interim reprocessing of slightly enriched uranium fuels discharged from power and propulsion reactors. The fuel from the various reactors vary greatly in physical dimensions and in the composition of the core and cladding. For the purposes of chemical reprocessing, the fuels may be divided into the three main categories of aluminum, Zircaloy or stainless steel clad elements. The fuels may be sub-divided by the nature of the core material; e.g. metallic uranium, uranium dioxide, uranium-molybdenum alloys uranium-aluminum alloys, etc.

For purposes of an earlier consideration of the effects of in-reactor test loops on PRTR operation and program, the design of the high pressure, H20 cooled fuel test loop was assumed to be similar to that for the high pressure, gas cooled loop. Detailed design criteria for the H20 loop have recently been completed so that this assumption is no longer necessary. Therefore, to insure that the effects of all proposed in-reactor loops are fully evaluated with respect to Plutonium Recycle Program objectives, the present study has been carried out. Much of the qualitive discussion in the original analysis is still considered valid. Thus, rather than repeating the entire analysis as it pertains to the H20 loop, only those departures resulting from differences between the assumed design and the scope design are presented.

The Fermi age of thermal neutrons in a lattice containing both water and graphite in some sort of weighted average of the age in water and in graphite independently, with correction for volumes of non-moderating elements or voids. The correct weighting function has been in question during design calculations for the NPR. This paper presents a very simple and direct approach to the problem, resulting in a weighting equation which seems to be theoretically sound. Unfortunately, simple theories cannot be guaranteed to give good results in complicated systems; nevertheless, it appears that the weighting dunction derived here is to be preferred over methods involving empirical relationships which are of doubtful validity in the NPR geometry.

The NPR design calls for carbon steel to be the major constituent in the reactor coolant piping system. The piping and its associated fittings will, in all likelihood, be exposed to atmospheric weather conditions during the period of reactor construction. This type of exposure causes rusting. From experience gained during the startup of KER Loop 1 it is expected that there will be initially high NPR coolant activity levels. The high activity during the startup of KER Loop 1 was partially caused by the activation of rust that was eroded from pipe walls. Prevention of rusting on the carbon steel prior to its introduction into the coolant system would reduce the initial activity levels.

Property changes to common graphites resulting from reactor irradiation depends strongly on the temperature of exposure. Radiation affects at 30 C and 400 to 500 C are quite well known; however, at intermediate temperatures, results are not well known although a large volume of graphite in most reactors operate in this range. Production test, IP-22A, was reactivated, after a dormant period of many months, to study radiation damage between 30 and 400 C. This report concerns mainly the experimental details and evaluation of the equipment necessary for the controlled temperature irradiation.

The Atomic Energy Commission has assigned Hanford Atomic Products Operation the responsibility of reprocessing some of the slightly enriched uranium fuel elements from nuclear power reactors. Some stainless steel clad fuel elements contain sodium or a sodium-potassium alloy as a heat transfer medium between metallic core and outer sheath. The nature of the reaction between water and sodium is well known; however, the reaction between sodium and an oxidizing acid is more energetic and not so well known. The unknown factor of interest is the pressure generated by the reaction between the next transfer medium and the acid used for fuel dissolution prior to solvent extraction. The scouting studies discussed in this report were made to determine hydraulic pressures developed when sodium is exposed to cold concentrated nitric acid beneath the liquid surface.

On a project of the magnitude and complexity of the Plutonium Recycle Test Reactor is was considered prudent engineering practice to obtain an independant design review by a competent off-site group that had not participated in any way in the development of the design. Accordingly, the Atomic Power Equipment Department of the General Electric Company was requested to make such an engineering review, and an Assistance to Hanford contract authorizing this work was approved by the Atomic Energy Commission in November, 1958.

This paper discusses a remotely operated system developed to transport (raise and lower) a 1/2 gram radium gamma radiation source for calibration of the HAPO film badges and finger rings. The system employs the rotometer principle for positioning the source for operating purposes. An accurate timer is utilized to assure the desired exposure time.

Basic Studies. It has been reported previously that a reduction of PuO2 to a suboxide does not occur when a powder sample is heated for one hour at 1450 C. To investigate this anomaly, the present hooded facilities were converted from full air flow to an argon atmosphere to prevent oxidation of a possible suboxide. Five grams of PuO2 powder were heated in dry hydrogen to 1500 C for times of one and eight hours. Immediately after discharge, they were mounted and transferred to a helium atmosphere diffractometer hood. The resulting x-ray diffraction pattern consisted only of the single FCC PuO2 phase.

The processing of irradiated fuels from power and propulsion reactors is planned by Hanford Atomic Products Operation as part of the Atomic Energy Commission's interim reprocessing scheme. The several chemical processes proposed for the reprocessing of these fuels may be divided into two categories: first, total dissolution processes which dissolve both fuel element cladding and core material and, second, selective dissolution processes which dissolve either cladding or core material. The Niflex process uses a nitric and hydrofluoric acid solution for the total dissolution of stainless steel clad uranium fuel elements.

At the request of Process Control Development, Chemical Development Operation, statistical assistance was provided by the Operations Research and Synthesis operation in the design and analysis of an experiment to determine how accurately volumes of solution in a large process vessel could be measured. A detailed discussion of the vessel calibration tests, the associated liquid level measuring equipment and the conclusions thereof are presented in HW-62049. The main purpose of this report is to present the precision and accuracy statements obtained, the method by which they were calculated, and to point out the advantages of this method over other "least square" procedures.

Conceptual design studies conducted at HAPO indicate that the improved thermal efficiencies which can be obtained in a high pressure, high temperature, nuclear-electric power plant might reduce unit power costs substantially. The Plutonium Recycle Test Reactor (PRTR) is designed primarily to investigate various facets of plutonium recycle operation. In order to increases the usefulness of the PRTR as an experimental tool, it is desirable to include facilities for testing materials and fuel concepts under a variety of conditions, including the high temperatures and pressures which may be encountered in future water-cooled power reactors.