This report discusses studies revealing the tensile properties, hot hardness, and heat treatment characteristics of uranium alloys with added aluminum or zirconium.

Abstract: "A method has been devised and successfully used for marking a leaking pile process tube prior to its removal from the pile, such that subsequent location of the leak is more easily accomplished. An acetone solution of Testor's Dark Red Airplane Dope is poured into the suspect tube. The solution leaks from the hole and stains the surrounding area a light pink. To date the method has been used on tubes 3573F, 0486F, 0867F, and 3670F."

The Alco Products Criticality Facility, site location, and operating procedures are described in detail, including the handling of fissionable material and the operating procedures for the safe performance of critical experiments.

Introduction: This is the third of a series of memoranda concerning the statics of the teapot, a small-scale boiling reactor experiment, and covers power coefficients of reactivity, energy coefficients of fluid density, the poisoning effects of fission products, and production of gases. The numbering of the equations, figures, and tables thus follows that of CF 52-6-118.

From introduction: "The basic interactions which give rise to the interesting magnetic properties of dilute alloys, such as cobalt in palladium, have received a great deal of attention both theoretically and experimentally. This problem has many facets which are peculiarly interrelated. For example, there is the problem of Curie points of the order of magnitude of 10°K for concentrations of 'magnetic' ions of 0.1%. It has been proposed that this problem involves virtual d-states (Friedel) which permit one to understand much of what is observed."

The recovery of plutonium and neptunium by anion exchange has been well demonstrated on a laboratory scale. (1, 2,3,4) The specific adsorbed by the resin is the tetravalent hexanitrate complex of either element. With plutonium (IV) and neptunium(V) in IWW, the plutonium is adsorbed but the neptunium is not. If nitrite is used as the reductant in strong (preferably 8 M or over) nitric acid, both plutonium and neptunium are obtained in the tetravalent state, and both are adsorbed on the resin. With stronger reductants, such as semi carbazide or ferrous sulfamate, plutonium (III) and neptunium (IV) are obtained so that only the neptunium is adsorbed. Optimum recovery of either element is obtained with between seven and eight M nitric acid.