Three-dimensional photonic lattices are engineered materials which are the photonic analogues of semiconductors. These structures were first proposed and demonstrated in the mid-to-late 1980's. However, due to fabrication difficulties, lattices active in the infrared are only just emerging. Wide ranges of structures and fabrication approaches have been investigated. The most promising approach for many potential applications is a diamond-like structure fabricated using silicon microprocessing techniques. This approach has enabled the fabrication of 3-D silicon photonic lattices active in the infrared. The structures display band gaps centered from 12{micro} down to 1.55{micro}.

Topics discussed in the conference included the following: Radiation Physics, Radiation Chemistry and modelling--Radiation physics and dosimetry; Electron transfer in biological media; Radiation chemistry; Biophysical and biochemical modelling; Mechanisms of DNA damage; Assays of DNA damage; Energy deposition in micro volumes; Photo-effects; Special techniques and technologies; Oxidative damage. Molecular and cellular effects-- Photobiology; Cell cycle effects; DNA damage: Strand breaks; DNA damage: Bases; DNA damage Non-targeted; DNA damage: other; Chromosome aberrations: clonal; Chromosomal aberrations: non-clonal; Interactions: Heat/Radiation/Drugs; Biochemical effects; Protein expression; Gene induction; Co-operative effects; ``Bystander'' effects; Oxidative stress effects; Recovery from radiation damage. DNA damage and repair -- DNA repair genes; DNA repair deficient diseases; DNA repair enzymology; Epigenetic effects on repair; and Ataxia and ATM.

None

The effect of shrapnel on target chamber components and experiments at large lasers such as the National Ignition Facility at LLNL and the Megajoule Laser at CESTA in France is an important issue in fielding targets and exposure samples. Modeling calculations are likely to be an important component of this effort. Some work in this area has been performed by French workers, who are collaborating with the LLNL on many issues relating to target chamber, experiment-component, and diagnostics survival. Experiments have been performed at the PhCbus laser in France to measure shrapnel produced by laser-driven targets; among these shots were experiments that accelerated spheres of a size characteristic of some of the more damaging shrapnel. These spheres were stopped in polyethylene witness plates. The penetration depth is characteristic of the velocity of the shrapnel. Experimental calibration of steel sphere penetration into polyethylene was performed at the CESTA facility. The penetration depth has been reported (ref. 1) and comparisons with modeling calculations have been made (ref. 2). There was interest in a comparison study of the modeling of these experiments to provide independent checks of the calculations. This work has been approved both by DOE headquarters and by the French Atomic …

The authors have successfully synthesized highly crystalline, size-selected indirect band-gap nanocrystals (NC) of Si, Ge and MoS{sub 2} in the size range 2-10 nm in inverse micelles and studied their optical absorption and photoluminescence (PL) properties using liquid chromatography. Room temperature, visible PL from these nanocrystals was demonstrated in the range 700-350 nm (1.8-3.5 eV). their experimental results are interpreted in terms of the corresponding electronic structure of the bulk materials and it is demonstrated that these nanocrystals retain bulk-like electronic character to sizes as small as 2 nm, but the absorbance energies are strongly blue-shifted by quantum confinement. The experimental results on Si-NCs are also compared to earlier work on Si clusters grown by other techniques and to the predictions of various model calculations. Currently, the wide variations in the theoretical predictions of the various models along with considerable uncertainties in experimental size determination for clusters less than 3-4 nm, make it difficult to select the best model.

The purposes of this paper are to (1) discuss the necessity for conducting accelerated life testing (ALT) in the early stages of developing new photovoltaic (PV) technologies, (2) elucidate the crucial importance for combining ALT with real-time testing (RTT) in terrestrial environments for promising PV technologies for the 21st century, and (3) outline the essential steps for making a service lifetime prediction (SLP) for any PV technology. The specific objectives are to (a) illustrate the essential need for ALT of complete, encapsulated multilayer PV devices, (b) indicate the typical causes of degradation in PV stacks, (c) elucidate the complexity associated with quantifying the durability of the devices, (d) explain the major elements that constitute a generic SLP methodology, (e) show how the introduction of the SLP methodology in the early stages of new device development can reduce the cost of technology development, and (f) outline the procedure for combining the results of ALT and RTT, establishing degradation mechanisms, using sufficient numbers of samples, and applying the SLP methodology to produce a SLP for existing or new PV technologies.

We examined the ability of a halophilic bacterium (WFP 1A) isolated from the Waste Isolation Pilot Plant (WIPP) site to accumulate uranium in order to determine the potential for biocolloid facilitated actinide transport. The bacterial cell Surface functional groups involved in the complexation of the actinide were determined by titration. Uranium, added as uranyl nitrate, was removed from solution at pH 5 by cells but at pH 7 and 9 very little uranium was removed due to its limited volubility. Although present as soluble species, uranyl citrate at pH 5, 7, and 9, and uranyl carbonate at pH 9 were not removed by the bacterium because they were not bioavailable due to their neutral or negative charge. Addition of uranyl EDTA to brine at pH 5, 7, and 9 resulted in the immediate precipitation of U. Transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS) analysis revealed that uranium was not only associated with the cell surface but also accumulated intracellulary as uranium-enriched granules. Extended X-ray absorption fine structure (EXAFS) analysis, of the bacterial cells indicated the bulk sample contained more than one uranium phase. Nevertheless these results show the potential for the formation of actinide bearing bacterial biocolloids …

High resolution spectroscopy experiments with visible adaptive optics (AO) telescopes at Starfire Optical Range and Mt. Wilson have demonstrated that spectral resolution can be routinely improved by a factor of - 10 over the seeing-limited case with no extra light losses at visible wavelengths. With large CCDs now available, a very wide wavelength range can be covered in a single exposure. In the near future, most large ground-based telescopes will be equipped with powerful A0 systems. Most of these systems are aimed primarily at diffraction-limited operation in the near IR. An exciting new opportunity will thus open up for high resolution IR spectroscopy. Immersion echelle gratings with much coarser grooves being developed by us at LLNL will play a critical role in achieving high spectral resolution with a compact and low cost IR cryogenically cooled spectrograph and simultaneous large wavelength coverage on relatively small IR detectors. We have constructed a new A0 optimized spectrograph at Steward Observatory to provide R = 200,000 in the optical, which is being commissioned at the Starfire Optical Range 3.5m telescope. We have completed the optical design of the LLNL IR Immersion Spectrograph (LISPEC) to take advantage of improved silicon etching technology. Key words: adaptive …

Using Interracial Force Microscopy (IFM), we investigated the tribological behavior of hexadecanethiol monolayer on Au and films of octadecyltrichlorosilane (ODTS), perfluorodecyltrichlorosilane (PFTS) and dodecane on Si. We observe a strong correlation between hysteresis in a compression cycle (measured via nanoindentation) and friction. Additionally, we suggest that the amount of hysteresis and friction in each film is related to its detailed molecular structure, especially the degree of molecular packing.

Time-dependent simulations with transport coefficients derived from experimentally achieved discharges are used to explore the capability of off-axis electron cyclotron current drive (ECCD) to control hollow current profiles in negative central shear discharges. Assuming these transport coefficients remain unchanged at higher EC power levels, the simulation results show that high confinement, high normalized beta and high bootstrap fraction can be achieved with EC power expected to be available in the near future in the DIII-D tokamak.

The NIF laser system will be capable of delivering 1.8MJ of 351nm energy in 192 beams. Diagnostics instruments must measure beam energy, power vs. time, wavefront quality, and beam intensity profile to characterize laser performance. Alignment and beam diagnostics are also used to set the laser up for the high power shots and to isolate problems when performance is less than expected. Alignment and beam diagnostics are multiplexed to keep the costs under control. At the front-end the beam is aligned and diagnosed in an input sensor package. The output 1053nm beam is sampled by collecting a 0.1% reflection from an output beam sampler and directing it to the output sensor package (OSP). The OSP also gets samples from final focus lens reflection and samples from the transport spatial filter pinhole plane. The output 351nm energy is measured by a calorimeter collecting the signal from an off-axis diffractive beam-sampler. Detailed information on the focused beam in the high-energy target focal plane region is gathered in the precision diagnostics. This paper describes the design of the alignment and diagnostics on the NIF laser system.

We have previously presented simple elastic deformation modeling results for three classes of seismic events of concern in monitoring the CTBT--underground explosions, mine collapses and earthquakes. Those results explored the theoretical detectability of each event type using synthetic aperture radar interferometry (InSAR) based on commercially available satellite data. In those studies we identified and compared the characteristics of synthetic interferograms that distinguish each event type, as well the ability of the interferograms to constrain source parameters. These idealized modeling results, together with preliminary analysis of InSAR data for the 1995 mb 5.2 Solvay mine collapse in southwestern Wyoming, suggested that InSAR data used in conjunction with regional seismic monitoring holds great potential for CTBT discrimination and seismic source analysis, as well as providing accurate ground truth parameters for regional calibration events. In this paper we further examine the detectability and ''discriminating'' power of InSAR by presenting results from InSAR data processing, analysis and modeling of the surface deformation signals associated with underground explosions. Specifically, we present results of a detailed study of coseismic and postseismic surface deformation signals associated with underground nuclear and chemical explosion tests at the Nevada Test Site (NTS). Several interferograms were formed from raw ERS-1/2 radar …

There is great interest in being able to use the x-ray output from a Z-pinch for equation of state measurements at extreme conditions. However, the direct x-ray output form the pinch produces a very sharp and rapidly attenuating pressure pulse in target materials. To obtain high quality measurements with this source, a mechanism for generating non-attenuating waves is needed. One possibility involves using the x-ray source to throw a near-normal density intermediate drive at the target, a situation similar to more conventional configurations. To scope out preliminary design parameters, they used the ALEGRA code to simulate a number of different possibilities involving the driver and the gap between it and the target. They used a somewhat idealized radiation source--a main x-ray pulse 30 ns long at its base and peaking at a blackbody temperature of 100 eV. The calculations suggest that a 100-micron aluminum driver with a 90-micron gap will yield a 15-ns-wide non-attenuating pulse with an amplitude of over 250 GPa.

We generally use large-scale hydrocodes to study the dynamic response of targets to influence pulsed radiation loads. However, for many applications where the desired solution does not require a detailed specification of pressure- or velocity-time histories, there are simple analytic approaches that can yield surprisingly accurate results. Examples include determining either the final velocity of a radiation-driven flying plate or the impulse delivered to a structural element. These methods are all based on relatively straightforward use of conservation of mass and momentum, but they typically need one scaling-law parameter. In this context, short pulse means short compared to the characteristic time of the desired response, which allows for the phenomena to be essentially uncoupled. High fluence means that the input energy is great enough to yield vaporization or blowoff of one or more portions of the configuration. We discuss some of these methods, give examples, and suggest limitations and criteria for their use.

This paper introduces new octant-range, composite-type Gauss and mid-point rule angular quadrature formulas for neutron and photon transport computations. A generalization to octant-range quadratures is also introduced in order to allow for discontinuities at material interfaces for two- and three-dimensional transport problems which can be modeled with 60-degree triangular or hexagonal mesh subdivisions in the x-y plane.

Experiment E917 at the Brookhaven AGS has made a measurement of near-mid-rapidity antibaryon production in both the antiproton and antilambda channel. Results on dN/dy and inverse slope parameters are shown. A preliminary measurement of the ratio {bar {Lambda}}/{bar p} is also presented.

On July 28-29, 1999, the Federal Energy Technology Center (FETC) and the WMAC Foundation co-sponsored the Appalachian Rivers II Conference in Morgantown, West Virginia. This meeting brought together over 100 manufacturers, researchers, academicians, government agency representatives, watershed stewards, and administrators to examine technologies related to watershed assessment, monitoring, and restoration. Sessions included presentations and panel discussions concerning watershed analysis and modeling, decision-making considerations, and emerging technologies. The final session examined remediation and mitigation technologies to expedite the preservation of watershed ecosystems.

The material control and accountancy system for the Fuel Conditioning Facility (FCF) initially uses calculated values for the mass flows of irradiated EBR-II driver fuel to be processed in the electrorefiner. These calculated values are continually verified by measurements performed by the Analytical Laboratory (AL) on samples from the fuel element chopper retained for each chopper batch. Measured values include U and Pu masses, U and Pu isotopic fractions, and burnup (via La and Tc). When the measured data become available, it is necessary to determine if the measured and calculated data are consistent. This verification involves accessing two databases and performing standard statistical analyses to produce control charts for these measurements. These procedures can now be invoked via a Web interface providing: a timely and efficient control of these measurements, a user-friendly interface, off-site remote access to the data, and a convenient means of studying correlations among the data. This paper will present the architecture of the interface and a description of the control procedures, as well as examples of the control charts and correlations.

Typical ASTM fracture testing determines J-integral resistance (J-R) curve or fracture toughness (JIC) based on specimens with high constraint geometry such as those specified in ASTM E1737-96. A three-term asymptotic solution with two parameters J and A2 (a constraint parameter) has been developed for characterizing the constraint effect of various geometries. The present paper extends the J-A2 characterization of a stationary crack tip to the regime of stable crack growth. Similar to the concept of J-controlled crack growth, the J-A2 description can be approximately used to characterize ductile crack growth under certain amount of crack extension. The region of J-A2 controlled crack growth is much larger than that controlled by J-integral alone. From the relationships between A2 and the test data, JIC and tearing modulus (TR), the coefficients used to define a J-R curve can be determined. For non-standard specimens or actual structures, once the constraint parameter A2 is determined, the J-R curves appropriate for these geometries can then be obtained. A procedure of transferring J-R curves determined from the standard ASTM procedure to non-standard specimens or flawed structures is outlined in the paper.

Magnitude estimation forms an integral part in any seismic monitoring endeavor. For monitoring compliance of the Comprehensive Nuclear-Test-Ban Treaty, regional seismic discriminants are often functions of magnitude such as m{sub b}:M{sub 0} high-to-low spectral ratios, and nuclear yield estimation. For small-to-moderate magnitude events that cannot be studied by a large regional or global network of stations, there is a need for stable magnitudes that can be obtained from as few as one station. To date, magnitudes based on coda envelopes are by far the most stable because of the coda's averaging properties. Unlike conventional magnitudes which utilize the direct phases such as P (P{sub n}, P{sub g}) or S (S{sub n}, L{sub g}), or M{sub g}, a coda envelope magnitude is not as sensitive to the undesirable effects of source radiation pattern, 3-D path heterogeneity, and constructive/destructive interference near the recording site. The stability of the coda comes from a time-domain measurement made over a large portion of the seismogram thereby averaging over the scattered wavefield. This approach has been applied to earthquakes in the western United States where it was found that a single-station coda magnitude was approximately equivalent to an average over a 64 station network which used …

The ARAC Client System allows users (such as emergency managers and first responders) with commonly available desktop and laptop computers to utilize the central ARAC system over the Internet or any other communications link using Internet protocols. Providing cost-effective fast access to the central ARAC system greatly expands the availability of the ARAC capability. The ARAC Client system consists of (1) local client applications running on the remote user's computer, and (2) ''site servers'' that provide secure access to selected central ARAC system capabilities and run on a scalable number of dedicated workstations residing at the central facility. The remote client applications allow users to describe a real or potential them-bio event, electronically sends this information to the central ARAC system which performs model calculations, and quickly receive and visualize the resulting graphical products. The site servers will support simultaneous access to ARAC capabilities by multiple users. The ARAC Client system is based on object-oriented client/server and distributed computing technologies using CORBA and Java, and consists of a large number of interacting components.

Calibration of hydroacoustic and T-phase stations for Comprehensive Nuclear-Test-Ban Treaty (CTBT) monitoring will be an important element in establishing new operational stations and upgrading existing stations. Calibration of hydroacoustic stations is herein defined as precision location of the hydrophones and determination of the amplitude response from a known source energy. T-phase station calibration is herein defined as a determination of station site attenuation as a function of frequency, bearing, and distance for known impulsive energy sources in the ocean. To understand how to best conduct calibration experiments for both hydroacoustic and T-phase stations, an experiment was conducted in May, 1999 at Ascension Island in the South Atlantic Ocean. The experiment made use of a British oceanographic research vessel and collected data that will be used for CTBT issues and for fundamental understanding of the Ascension Island volcanic edifice.

The RELAP5-3D (version bt) computer code was used to assess the United States Nuclear Regulatory Commission's Standard Problem 1 (Edwards-O'Brien Blowdown Test). The RELAP5-3D standard installation problem based on the Edwards-O'Brien Blowdown Test was modified to model the appropriate initial conditions and to represent the proper location of the instruments present in the experiment. The results obtained using the modified model are significantly different from the original calculation indicating the need to model accurately the experimental conditions if an accurate assessment of the calculational model is to be obtained.

None