The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

The Dynamic Gas Pulse Loading (DGPL) process is an hydraulic fracturing method which uses CO{sub 2} and CO gas as a working fluid instead of a liquid. The DGPL system can be used to generate fractures for horizontal and vertical oil and gas well completions in both open hole and perforated casing. The DGPL system provides a cost effective tool for repairing near well bore permeability damage caused by inappropriate chemical treatment, migrating fines and paraffins, or slotted liners blocked by sand. Because the gas is generated from a solid propellant material by chemical reaction, no heavy equipment is required. Tremendous pump rates can be obtained. Peak pressures are naturally localized at the tool position by the tamping effect of well fluids. Thus many of the leakage and sealing problems which plague static hydrofrac processes ore completely avoided. DGPL may be effectively used before acid treatment to provide fresh pathways for the acid to reach the formation. The smaller tools may be positioned by wireline, though most Stressfrac tools are tubing conveyed.

None

Many applications in material science, chemistry, and atomic physics require an x-ray source that has a repetition rate of 1 Hz to a few kHz. In these fields, a very wide range of photon energies is of interest. One application is time-resolved surface photoelectron spectroscopy and microscopy where low energy (< 1{mu}J) pulses are required to avoid space charge effects but high-repetition rates ({approx} kHz) provide the high average power which is needed to obtain the desired resolution. In pump-probe experiments, it is desirable to have the repetition rate of the x-ray source be comparable to the repetition rate of the corresponding IR, optical, or UV laser. We show that the very high-repetition rate of synchrotrons (1--1000 MHz) results in an inefficient use of x rays for these types of experiments and that a kHz repetition rate x-ray laser would be an excellent source for many experiments. For some applications, a slower repetition rate of order 1 Hz is adequate provide the energy per pulse is larger ({approx}1 mJ). For example, in photoelectron spectroscopy of free clusters, an x-ray laser can provide the required large number of nearly monoenergetic photons during the short time the clusters can be probed in …

Much of the remaining oil offshore is trapped in formations that are extremely complex due to intrusions of salt domes. Conventional seismic processing techniques cannot clearly image either these traps or the full extent of oil-bearing segments near the salt domes; therefore, substantial volumes of oil may have remained uncontacted by previous drilling. Recently, however, significant innovations have been made in seismic processing and mathematical migration of seismic signal. In addition, significant advances have been made in deviated and horizontal drilling technologies and applications. These technology advances make it possible to reprocess existing seismic data to identify non-contacted portions of the reservoirs, which can then be contacted using advanced drilling technologies to kick out new wells from existing wells. Effective application of these technologies, along with improved recovery methods, offers opportunities to significantly increase Gulf of Mexico production, delay platform abandonments, and preserve access to a substantial remaining oil target for enhanced recovery and other advanced recovery processes. During this reporting period, data collection continued from the Minerals Management Service (MMS) and several operators. Modifications to BOAST II and MASTER reservoir simulators for the integration of radial grid systems and for use in simulating miscible gas injection processes in steeply …

The primary objective of the proposed work is to design, install, and operate an advanced fine coal processing circuit combining the Microcel and Multi-Gravity-Separator (MGS) technologies. Both of these processes have specific advantages as stand-alone units. For example, the Microcel column effectively removes ash-bearing mineral matter, while the MGS efficiently removes coal-pyrite composites. By combining both unit operations into a single processing circuit, synergistic advantages can be gained. As a result, this circuit arrangement has the potential to improve coal quality beyond that achieved using the individual technologies. Work this quarter primarily focused on procurement and fabrication of the required process equipment. All fabrication work is underway and is expected to be completed prior to the installation deadline. Delays in the existing project within the Pittsburgh Energy Technology Center`s Coal Preparations Process Research Facility have resulted in a shift in the original project schedule. A new installation date (June 28, 1993) has been established by DOE/PETC. The overall project schedule has been adjusted accordingly. Revisions to ESH subject plans were also completed during this quarter. Based on these plans, the ESH permitting procedure has been initiated by the contracting officer`s representative. The subject plans and circuit will be modified, if …

The project consists of 3 tasks: (1) Developing a Production Environmental Database (PED) with the purpose of investigating the current industry waste storage and disposal practices by different regions, states and types of waste and investigating the environmental impacts associated with these practices; (2) Evaluating the suitability of available and developing technologies for treating produced water and identifying applicable unit process configurations; and (3) Evaluating the costs associated with various degrees of treatment achievable by different configurations. Records of wells drilled during the years 1986 through 1991 were compiled from industry reports. Overall, drilling has decreased from an average of 60,000 wells/yr for the period 1981 through 1985 to 20,000/yr during 1986 through 1991. A produced water database was developed from data and information provided by the various state and federal agencies. Currently, the database has information on the production of oil, gas and brines from 24 states. The data from the produced water database indicate that for the most part, Class II Injection seemed to be the common disposal method. Other methods included evaporation, surface disposal via NPDES permit, road spreading, hauling out-of-state, and annular disposal. A survey of oil and gas operators has been developed, reviewed and edited. …

Vortec Corporation`s Phase III development contract DE-AC22-91PC91161 for a ``Coal-Fired Combustion System for Industrial Process Heating Applications`` is project funded under the DOE/PETC advanced combustion program. This advanced combustion system research program is for the development of innovative coal-fired process heaters which can be used for high temperature melting, smelting and waste vitrification processes. The process heater systems to be developed have multiple use applications; however, the Phase III research effort is being focused on the development of a process heater system to be used for producing value added vitrified glass products from boiler/incinerator ashes and industrial wastes. The primary objective of the Phase III project is to develop and integrate all the system components, from fuel through total system controls, and then test the complete system in order to evaluate its potential marketability. During the past quarter, the designs of the remaining major components of the integrated system were completed and the equipment was ordered. DOE has elected to modify the scope of the existing R&D program being conducted under this contract to include testing of a simulated TSCA incinerator ash. The modification will be in the form of an additional Task (Task 8 -- TSCA Ash Testing) to …

This report addresses the comparison of perturbation method and TEAPOT tracking on tune shift calculations.

Adaptive optic systems promise to give diffraction limited performance to ground based telescopes operating at visible and near infrared wavelengths. However, because of the short spatial scale of atmospheric turbulence, the corrected field of view is limited to only a few arc seconds in the visible, to perhaps 10 arc seconds at L band (3.5 {mu}). A bright point source must be in this field of view as a wavefront reference, but the number density of natural stars is too small for full sky coverage at imaging wavelengths less than 3{mu}. A sufficiently bright point source can be artificially generated by a laser however, and investigations into the use of laser beacons has been proceeding for some time now. Our experiments at Livermore have concentrated on the formation of guide stars in the sodium mesospheric layer at 90 km altitude. We have also designed and built adaptive optics systems that use both artificial and natural guide stars. Experimental results to date have shown great promise for the practicality of this technique in astronomy.

Data obtained during site characterization should be useful to assess the need for remediation, to evaluate and design effective remedial plans, and to allow long-term monitoring to discern remediation effectiveness. A valuable environmental tool that incorporates this data is a model that describes groundwater and vadose zone flow and transport characteristics. Data on geology and hydrology combined with information on contaminant sources are incorporated into these conceptual models that delineate the relative significance of the various fluid migration pathways. Downstream these same models also support risk assessment, remediation design, and long-term assessment of remediation effectiveness. Consequently, the building of coherent, accurate vadose zone and groundwater models is fundamental to a successful remediation. Among the important requirements for these models is accurate knowledge of flow domain boundaries and soil characteristics. At the Hanford Site, this knowledge is obtained primarily from borehole data, which provides information only at a point. In the high energy flood and fluvial deposits found at the Hanford Site, it can, at times, be difficult to correlate lithologic horizons between boreholes. Where there is no borehole control, our understanding of the geometry of hydrogeologic boundaries and thus of fluid migration paths is limited. Surface geophysical techniques are generally …

This report very briefly discusses heavy quark symmetry.

The goal of this project is to investigate the geochemical, geological, and production parameters that control the occurrence of naturally occurring radioactive materials (NORM) in oil-and gas-field operations, Activities during the second quarter of 1993 focused on identifying field sample sites, identifying previously analyzed produced-water samples that are suitable for NORM analysis, establishing methods for analyzing radium in produced water and scale, and modifying existing geochemical modeling codes to predict radium coprecipitation with carbonate and sulfate scale on the basis of thermodynamic properties.

A low intensity radiation field is generated by the high level waste that is stored within carbon steel lined tanks at the Savannah River Site (SRS). The highest level of radiation damage to the tank walls from gamma and spontaneous neutron emissions is estimated to be less than 1.0E-6 displacements per atom (DPA) for a 100 year exposure to fresh, ``high heat`` SRS waste assuming continuous replenishment of the radionuclides. This damage level is below the limit for measurable radiation damage to the mechanical properties of carbon steel. Structural assessment of tanks for storage of high level waste may be based on nominal or code values of the mechanical properties of the steels from which the tanks were constructed.

In this quarter the design of the plant structures was completed 70%. The design philosophy of the structure economizes on the use of steel by providing supports for the hot cyclone and hot gas duct connecting the cyclone to the boiler while fulfilling the needs for platforms and walkways at the various levels necessary for operational access. Figures 1 through 6 indicate the layout of the plant structure. At the same time the structure for the Coarse Coal Silo V-2 and Limestone Silo V-4 were incorporated and completed. Following completion of the piping pressure drop calculations, pipe sizing and layout drawings, detailed drawings of the piping in different views are being prepared. The pulse combustor is used to burn fine coal particles and provide an ignition source and supplementary heat to the fluid bed. The following is a description of the components: air plenum, fine coal injectors, aerovalves, water jacket, and tailpipe inserts.

The induction of cancer by ionizing radiation is a matter of great practical importance to the nuclear industry, to national defense, to radiological medicine and to the general public. It is increasingly apparent that carcinogenesis is one of the leading dose-limiting effects of radiation exposure (Co90). Quantitative information at the cellular level is essential to an understanding of the mechanisms of radiogenic neoplastic initiation and the stages of promotion and progression to overt neoplasia. We have developed two experimental models, the rat thyroid and rat mammary clonogen transplant systems, for the quantitative study of radiation carcinogenesis at the cellular level in vivo (C185). The most important steps taken or completed during the current grant year include: (a) demonstration of the high age-dependent radiosensitivity of prepubertal rat mammary clonogens to radiogenic damage which may influence their susceptibility to neoplastic initiation, and (b) demonstration of the feasibility of using a molecular test for clonogenicity in which Simple Sequence Repeats in the DNA serve as identifying signals of the genotypic origin of the cells. We have also (c) set up a large carcinogenesis experiment to test the effect of close intercellular contact in thyroid glands in situ on promotion-progression of radiogenically initiated clonogens, …

A system-theoretic approach is proposed to investigate the feasibility of reconstructing a sound velocity profile (SVP) from acoustical hydrophone measurements. This problem is based on a state-space representation of the normal-mode propagation model. It is shown that this representation can be utilized to investigate the so-called observability of the SVP from noisy measurement data. A model-based processor is developed to extract this information and it is shown that even in cases where limited SVP information is available, the SVP can be estimated using this approach.

Weekly newsletter discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

Section 205(a)(2) of the Department of Energy Organization Act of 1977 requires the Administrator of the Energy Information Administration (EIA) to carry out a central, comprehensive, and unified energy data and information program that will collect, evaluate, assemble, analyze, and disseminate data and information relevant to energy resources, reserves, production, demand, technology, and related economic and statistical information. The purpose of this report is to provide a comprehensive overview of changes in the structure of the US coal industry between 1976 and 1991. The structural elements examined include the number of mines, average mine size, the size distribution of mines, and the size distribution of coal firms. The report measures changes in the market shares of the largest coal producers at the national level and in various regions. The Central Appalachian low-sulfur coal market is given special attention, and the market for coal reserves is examined. A history of mergers in the coal industry is presented, and changes in the proportions of US coal output that are produced by various types of companies, including foreign-controlled firms, are described. Finally, the impact of post-1991 mergers on the structure of the industry is estimated. The legislation that created the EIA vested the …

Several experiments were conducted to study the efficiency of granulated sludge consortium (GSC) on the biomethanation of Texas lignite (TxL). With an aim of obtaining a better culture than Mic-1, GSC was used as inoculum at different concentrations. The first experiment was conducted under anaerobic conditions in 60-mL vials containing 40 mL 0.01% SNTM + 1% TxL + 10% GSC. Methane production was measured periodically in the vial headspace and after 20 days of incubation, methane was found to be up to 67 mole%. The second experiment was conducted to determine whether methane production was from biogasification of coal or from substrates used for growing the GSC. The effect of two different anaerobic conditions on biomethanation of Texas lignite was also studied.

The Electric Power Monthly (EPM) presents monthly electricity statistics. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data in this report are presented for a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. The EIA collected the information in this report to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended.

We have completed modifications of the Taylor Dispersion Apparatus so that propane can be used as a solvent. Problems were encountered initially compressing propane to the necessary pressures because of cavitation in the liquid pump. This problem was overcome by placing a check valve in the line after the pump and pressures of 2500 psi have been achieved. The system has been pressure tested by using a soap solution on exposed joints and performing a mass balance (leak test). The mass balance was made by reading the volumetric flow rate of liquid in the syringe pump and converting this to expected gas flow rate. The liquid was then vaporized and a dry gas meter measured the amount of gas at the exit of the apparatus. The expected and measured gas flow rates were in excellent agreement, indicating that there are no significant leaks in the system. Presently, we are having problems with the use of UV detection for the dim using compounds. The detector is successfully auto-zeroing with a blank cell and with Co{sub 2}. With the use of instrument grade propane, however, the detector is unable to auto-zero because of absorption of unknown impurity. We believe this problem is …

None

In this paper we outline a model which incorporates development processes into an evolutionary frame work. The model consists of three sectors describing development, genetics, and the selective environment. The formulation of models governing each sector uses dynamical grammars to describe processes in which state variables evolve in a quantitative fashion, and the number and type of participating biological entities can change. This program has previously been elaborated for development. Its extension to the other sectors of the model is discussed here and forms the basis for further approximations. A specific implementation of these ideas is described for an idealized model of the evolution of a multicellular organism. While this model doe not describe an actual biological system, it illustrates the interplay of development and evolution. Preliminary results of numerical simulations of this idealized model are presented.