Newsletter issued by the Advisory Council for Technical-Vocational Education in Texas discussing news, events, and other relevant information related to technical and vocational education for adults in Texas.

The fission cross sections of /sup 238/Pu have been measured from 0.1 eV to 80 keV energy range using the Rensselaer Intense Neutron Spectrometer. The cross sections were normalized to the /sup 235/U ENDF/B-V data broadened to the resolution of the Rensselaer Intense Neutron Spectrometer system. The fission areas and widths were determined for the resolved low-energy resonances. The ENDF/B-V fission cross sections for the /sup 238/Pu isotope are, in general, not in good agreement with the measured cross sections and a new evaluation is recommended. The observations of structure in the unresolved fission cross sections is suggestive of the existence of intermediate structure. 18 refs., 1 fig., 1 tab.

A brief review is given of selected topics in the electromagnetic structure of nucleons and nuclei, including nucleon form factors from both quantum chromodynamics and electron scattering data, measurements of the deuteron and triton form factors, quasi-elastic scattering, and the EMC effect. 47 refs., 13 figs. (LEW)

None

This document presents guidance to management on how to proceed in determining if the quantity of nonradioactive toxic materials in any Pacific Northwest Laboratory (PNL) or PNL-managed facility constitutes a potential threat to the public or to employees outside the facility. The ''Immediately Dangerous to Life or Health'' concept developed by the Department of Health, the Institute of Occupational Safety and Health, the Occupational Safety and Health Administration, and contractors who work with these organizations has been used as the measuring device to determine potential effects. The hazard classes (low, moderate and high) defined in the Department of Energy Order 5481.1A have been used to determine the seriousness of the potential effects. The management requirements related to the hazard classification have also been included.

We have reexamined the goal of approx.10/sup 13/ cm/sup -3/ central-cell density with end-plugging and reconfirmed its importance as a test of thermal barrier end-plugging performance in either Tara or TMX-U. We conclude that, when all factors are considered including the impact on other programs interlinked with LLNL in the present OFE budget, the lowest cost approach to have a fair chance to meet this goal is to extend Tara operation for the full FY87. Continuation of TMX-U operation in FY87, in addition to the full year of Tara operation, would greatly improve the chance of success. Continuation of the mirror program into FY88 and beyond would be based on an experimental program in TMX-U and Tara at a minimum budget level of $25M/y, with restart of MFTF-B requiring an increase in the national fusion budget. The experimental program to be investigated by TMX-U and Tara would include improvement in the mgnetic geometry (stability, beta limits, and transport), continued plug studies (longer pulse length, impurities, drift pumping, and ECH efficiency), and transport studies (chi/sub e/, fueling, and halo formation).

The Hamblin-Cleopatra volcano, selected for study because erosion and fault displacement have exposed the entire volcanic succession, the intrusive core, a radial dike systems, and sedimentary and volcanic rocks that predate and postdate the volcano, was investigated to estimate the proportions of igneous materials forming lava flows, pyroclastic deposits, intrusive bodies, and reworked debris. Chemical changes in the magma throughout the active period of the volcano were documented. The geothermal system active within the pile after activity ceased was reconstructed. (ACR)

We discuss high energy hadron collisions that contain a hard scattering, in the sense that a W, a Z, very heavy quarks, or high P/sub T/ jets are produced, yet are diffractive, in the sense that one of the incident hadrons is scattered with only a small energy loss. In our approach, the cross section for such diffractive hard scattering is a part of the normal hard scattering inclusive cross section, as calculated using perturbative quantum chromodynamics. We use Regge phenomenology in combination with perturbative QCD to estimate that a substantial fraction (perhaps 30%) of all hard scattering events are diffractive. Measurement of diffractive hard scattering cross sections would illuminate the short distance gluon and quark content of the Pomeron. 23 refs., 7 figs.

The injection/extraction systems of the 1.21 GeV Stanford Linear Collider (SLC) damping rings uses four pairs of water cooled septum magnets. Each pair consists of a thin-septum, low-field (3 mm, 3 kilogauss) magnet plus a thick-septum, high-field (12 mm, 8 kilogauss) model. In the latest design cooling reliability was improved by using stainless-steel tubing imbedded in the copper. The operating current in each is 2600 amperes, at a density of up to 120 amperes per mmS. Plasma-sprayed alumina is used to provide electrical insulation. The magnet system is compatible with 10 Z torr ultra-high vacuum. The magnet design, fabrication, and measurements are described.

The time history of the central toroidal plasma rotation velocity in Tokamak Fusion Test Reactor (TFTR) experiments with auxiliary heating by neutral deuterium beam injection and major-radius compression has been measured from the Doppler shift of the emitted TiXXI-K..cap alpha.. line radiation. The experiments were conducted for neutral beam powers in the range from 2.1 to 3.8 MW and line-averaged densities in the range from 1.8 to 3.0 x 10/sup 19/ m/sup -2/. The observed rotation velocity increase during compression is in agreement with results from modeling calculations which assume classical slowing-down of the injected fast deuterium ions and momentum damping at the rate established in the precompression plasma.

The performance of Rankine cycle binary systems for power generation using a hydrothermal resource has been investigated as a part of the DOE/GTD Heat Cycle Research Program. To date mixtures of paraffin-type hydrocarbons and water-ammonia mixtures have been investigated. This report gives the first results of the consideration of mixtures of halocarbons as working fluids in these power cycles. The performance of mixtures of Refrigerant-114 (R-114) and Refrigerant-22 (R-22) in combinations from pure R-114 to pure R-22 was calculated for such cycles. Various alternatives were considered: (1) minimum geofluid outlet temperature constraint/no constraint, (2) dry turbine expansion/expansion through vapor dome, (3) use of a turbine exhaust gas recuperator/no recuperator. Results of the study indicate that the halocarbon mixtures are at least as good as the hydrocarbon mixtures previously analyzed for a 360/sup 0/F resource. The magnitude of the net geofluid effectiveness (net energy produced per unit mass geofluid flow) for the R-114/R-22 mixtures is the same as for the best hydrocarbon mixtures previously analyzed. The percentage improvement in effectiveness in using mixtures over using the pure fluids as working fluids is comparable for both classes of working fluids. Recommendations are made to continue investigation of the halocarbon mixtures as possible …

This paper addresses specific and unique chemical engineering aspects of the Defense Waste Processing Facility (DWPF) at the Savannah River Plant. This paper also addresses the glass melter and those processes that are directly coupled to it. A somewhat disproportionate emphasis is given to sludge pretreatment, for the sake of completeness in this session. We have attempted to focus on those features of the DWPF that may be of general interest or even useful to the practicing chemical engineer.

An array of three portable, pressurized ionization chambers (PICs) measured short-term external radiation levels produced by air activation products from the Los Alamos Meson Physics Facility (LAMPF). The monitoring was at the closet offsite location, 700-900 m north and northeast of the source, and across a large, deep canyon. A Gaussian-type atmospheric dispersion model, using onsite meteorological and stack release data, was tested during their study. Monitoring results indicate that a persistent, local up-valley wind during the evening and early morning hours is largely responsible for causing the highest radiation levels to the northeast and north-northeast of LAMPF. Comparison of predicted and measured daily external radiation levels indicates a high degree of correlation. The model also gives accurate estimates of measured concentrations over longer periods of time.

Mid-water trawling techniques were used during September to estimate kokanee population abundance, structure and survival. Abundance in 1985 was estimated at 4.5 million fish (198 per hectare), down from over 12 million kokanee in 1974 when the population was first monitored. Hatchery fry production (<6 million annually) has stabilized kokanee abundance since its initial decline in the late 1960s. Wild fry recruitment has remained relatively stable at 1.8 million since 1978; whereas recruitment of hatchery-reared fry has ranged from 0.09 to 1.98 million. The 1985 creel survey indicated that kokanee harvest rates remain low, with approximately one kokanee harvested per hour of effort from April to August. Catch rates were as high as 3.5 fish per hour during the mid-1960s. The zooplankton community was monitored with periodic plankton tows. Zooplankton composition in 1985 was similar to previous years and appears to have stabilized following the introduction of mysids, with peak cladoceran production occurring several weeks after peak kokanee emergence. Delayed release of hatchery fry resulted in higher survival of hatchery (7.3%) than wild (0.43%) kokanee fry. Other release strategies will be tested as more fry become available.

QCD predictions for ..gamma gamma.. annihilation into single mesons, meson pairs, and baryon pairs are reviewed. Two-photon exclusive processes provide the most sensitive and practical measure of the distribution amplitudes, and thus a critical confrontation between QCD and experiment. Both the angular distribution and virtual photon mass dependence of these amplitudes are sensitive to the shapes of the phi (chi, Q). Novel effects involving the production of qq anti q anti q states at threshold are also discussed, and a new method is presented for systematically incorporating higher-order QCD corrections in ..gamma gamma.. reactions.

The MEVVA (Metal Vapor Vacuum Arc) ion source is a new kind of source which can produce high current beams of metal ions. Beams of a wide range of elements have been produced, spanning the periodic table from lithium up to and including uranium. The source extraction voltage is up to 60 kV, and we are increasing this up to 120 kV. A total ion beam current of over 1 Ampere has been extracted from the present embodiment of the concept, and this is not an inherent limit. The ion charge state distribution varies with cathode material and arc current, and beams like Li/sup +/, Co/sup +,2+,3+/ and U/sup 3+,4+,5+,6+/ for example, are typical; thus the implantation energy can be up to several hundred kilovolts without additional acceleration. The ion source has potential applications for ion implantation and ion beam mixing for achievement of improved corrosion resistance or wear resistance in metals or surface modification of ceramic materials and semiconductors. Here we outline the source and its performance, and describe some very preliminary implantation work using this source.

Monte Carlo calculations with the Lund string fragmentation model are compared to experimental results on the reactions ..gamma gamma -->..2..pi../sup +/2..pi../sup -/, ..gamma gamma -->..K/sup +/K/sup -/..pi../sup +/..pi../sup -/ and ..gamma gamma -->..p anti p..pi../sup +/..pi../sup -/. It is found, that when the parameters of the Lund model are tuned to low energy, inclusive multi hadron production in photon-photon collisions, the cross sections of exclusive processes near threshold are qualitatively reproduced. 14 refs., 3 figs.

The Advent of laser-ion-guiding in the Advanced test Accelerator along with the development of accelerator cavities optimized with respect to beam breakup coupling impedence now make it possible to consider a new class of high current, high emergy linear induction accelerators. The control of the beam breakup and other instabilities by laser guiding and by various magnetic focusing schemes will be discussed along with the scaling laws for the design of such machines to minimize the growth of the beam breakup instability. Many linacs, particularly induction linacs are limited in performance by the beam breakup (BBU) instability. The instability is found in two forms. In the first form the accelerating cavities communicate with one another through interaction with the beam and through propagation of cavity fields through the accelerator structure. In the second form which is the more virulent of the two, the cavities couple to each other only through their interactions with the beam. It is this second form of PPU that will be discussed in this paper.

Shock waves that occur in stellar atmospheres have their origin in some hydrodynamic instability of the atmosphere itself or of the stellar interior. In luminous early-type stars these two possibilities are represented by shocks due to an unstable radiatively-accelerated wind, and to shocks generated by the non-radial pulsations known to be present in many or most OB stars. This review is concerned with the structure and development of the shocks in these two cases, and especially with the mass loss that may be due specifically to the shocks. Pulsation-produced shocks are found to be very unfavorable for causing mass loss, owing to the great radiation efficiency that allows them to remain isothermal. The situation regarding radiatively-driven shocks remains unclear, awaiting detailed hydrodynamics calculations. 20 refs., 2 figs.

This report describes a mathematical model that estimates the rate that cesium and iodine isotopes would migrate from spent fuel rods after emplacement in a geologic repository that is subsequently flooded with ground water. 4 refs., 2 figs. (TEM)

Penetrations may result from corrosion or cracking and may be through the container material or through deposits of corrosion products. The analysis deals with the resultant radionuclide transport, but not with how these penetrations occur. We provide numerical illustrations for diffusive nuclide flux through these apertures from mathematical expressions. 2 refs., 2 figs.

The transport of radionuclides through penetrations in wastes containers is analyzed. Penetrations may result from corrosion or cracks and may occur in the original container material, in degraded or corroded material, or in deposits of corrosion products. In this report we do not consider how these penetrations occur or the characteristics of expected penetrations in waste containers. We are concerned here only with the analytical formulation and solutions of equations to predict rates of mass transfer through penetrations of specified size and geometry. Expressions for the diffusive mass transfer rates through apertures are presented in Chapter 2, and numerical illustrations are presented in Chapter 3. The calculations show that mass transfer through small penetrations in thin-wall containers can be great enough that the penetrated container is no longer an effective barrier for radionuclide release. Use of this theory to calculate mass transfer through thick-wall containers is the subject of a later report. 3 refs., 9 figs.

One simulation facility that has been developed is the BNL Plant Analyzer, currently set up for BWR plant simulations at up to seven times faster than real-time process speeds. The principal hardware components of the BNL Plant Analyzer are two units of special-purpose parallel processors, the AD10 of Applied Dynamics International and a PDP-11/34 host computer. The AD10 is specifically designed for time-critical system simulations, utilizing the modern parallel processing technology with pipeline architecture. The simulator employs advanced modeling techniques and efficient integration techniques in conjunction with the parallel processors to achieve high speed performance.

Encapsulated isotopic heat sources for use in generating electrical power for space applications require flight-quality hardware material. Iridium is the chosen material for such applications, and Oak Ridge National Laboratory has been the prime supplier of iridium alloy forming blanks 52 mm in diameter by 0.66 mm thick (1.0 by 0.026 in.). Prior to the work reported here, these blanks were ultrasonically examined by using 0.9-mm-diam (0.035-in.) simulated flaw standards. However, as a result of this effort, the sensitivity of our ultrasonic pulse-echo test system has been increased. The improved ultrasonic test system permits blank inspection at the 0.5-mm-diam (0.020-in.) simulated flaw detection level. This test system was successfully demonstrated on the initial blanks provided via an improved processing route (consumable arc-melting, extruding, and rolling). The equipment modification and/or selection and the specific focused search unit immersion technique developed to provide this capability are described. The improved flaw detection capability also provides data maps of a common type of defect in iridium (delaminations).