This memorandum discussed review of the data from tests using alum in the treatment of pile process water, and using activated silica as a coagulant aid during period of low water temperature, which shows that this method should be substituted for the present method of treating pile process water in all 100 Areas. It was recommended that the water treatment procedures and specifications attached to this memorandum be initiated as standard practice in all 100 Areas as soon as it is possible to make the necessary equipment modifications and installations.

Abstract: The data obtained from the radioassay of fish collected in vicinity of the Hanford Works between April, 1948 and June, 1950 are presented. Most of the radioactivity in the fish resulted from the concentration of p32 in the scales, bone, and certain visceral organs. The level of activity density in the fish was influenced by size, feeding habits and metabolic rate in addition to the activity density of the water. Changes in operation of nuclear reactors have resulted in progressive increases in activity densities of fish from one year to the next. The levels of radioactivity are not sufficiently high to be hazardous to either the fish or persons eating them.

Memorandum presenting an investigation at M = 2.01 in the 4- by 4-foot supersonic pressure tunnel to determine the effect of a series of nacelles on the longitudinal stability characteristics of a sweptback wing-body combination. Nacelle shape and position were varied on a configuration with a 6-percent-thick wing with an aspect ratio of 3.5, a taper ratio of 0.2, and 47 degrees of sweep at the quarter chord.

From Introduction: "The purpose of the present paper was to determine whether the characteristics about a skewed axis could be predicted from data about the normal angle-of-attack axis, and whether such a configuration offered any aerodynamic advantages over the conventional hinge location normal to the pane of symmetry."

Report presenting the results of an investigation of flap-type controls on a low-aspect-ratio triangular wing using NACA 0005-63 sections for a constant-chord and a constant-percent-chord control surface. Two flap profiles were investigated: one with a true contour and the other with a blunt trailing edge. Results regarding lift, drag, pitching moment, hinge moment, and rolling moments were obtained for several Mach numbers, a constant Reynolds number, and a range of angles of attack.

From abstract: Airborne radioactivity surveys in the Mojave Desert region, Kern, Riverside, and San Bernardino counties were made in five areas recommended as favorable for the occurrence of radioactive raw materials: (1) Rock Corral area, San Bernardino County. (2) Searles Station area, Kern County. (3) Soledad area, Kern County, (4) White Tank area, Riverside and San Bernardino counties. (5) Harvard Hills area, San Bernardino County. Anomalous radiation was detected in all but the Harvard Hills area.

Technical report calculating "effective removal cross sections" for Pb, Fe and O from measurements of fast neutron does in the water surrounding the BSF reactor. The values for Pb and Fe agree quite well with those previously determined from Lid tank data, whereas that for O is somewhat lower. [From Abstract]

Report presenting normal-acceleration and airspeed data obtained from V-G recorders installed in a two-engine type of transport airplane, employed in routine commercial operation in the United States for two years, which was analyzed to determine the gust and gust-load experiences of the airplane. Results regarding the acceleration experience, gust experience, average operating airspeed, maximum airspeed, comparison of predicted gust envelopes, and predicted gust-load envelopes are provided.

From Introduction: "The supersonic axial-flow compressor, for example, appears to offer advantages of high stage pressure ratio and height weight flows (reference 1) but problems peculiar to this compressor type have accompanied its introduction. For high single-stage pressure ratios (>4) the problem of converting the high dynamic energy to useful pressure arises (reference 2). In addition, the high tip speeds and weight flows combine to create a difficult situation for the turbine designer."

From Introduction: "In the present paper, which supplements reference 1, V-g records obtained from F8F-2 airplanes in 1949 are analyzed statistically to determine the frequency of experiencing large values of normal load factor and airspeed. These results are compared with the results from the F8F-1 airplane."

Report describing the results of the cupferron extraction-copper spark method in determining the impurity elements in plutonium metal. This was required the 234-5 Project analytical program.

Report describing methods of determining trace impurities in plutonium in connection with the Metal Fabrication Process. The methods included are the cupferron extraction-copper spark method and the direct copper spark method.

From introduction: This report presents the results of the two phases of the work: study of the compatibility of beryllia bodies with a coating material, molybdenum; and studies of beryllia-beryllium body fabrication.

Report presenting some simple approximate solutions that are derived for the relationships between rotor thrust and flight path velocity components and the rotor blade angle, torque, and in-plane forces.

Experimental and theoretical results are presented for boundary layer studies consisting of Schlieren observations and momentum surveys made on hollow cylinder models with their axes aligned parallel to the stream. Results were obtained for three model diameters and for natural and artificially induced turbulent boundary layer flows.

This technical report is a sequel to LA-596, "Efficiency for Very Slow Assembly" by K. Fuchs. Herein are given estimates of temperature rise and pressure developed as a result of active material slowly being driven supercritical. Marginal assembly rates can thus be determined for both metal and solution assemblies above which the disassembly by thermal expansion is explosive in the sense that the active material or containing vessel is ruptured.

Report presenting general procedures for computing internal pressures in fuel tubes of nuclear reactors and the effects on the pressure of varying neutron flux, fissioning material, and operating temperature.

None

Report presenting an attempt to determine the reliability and calibration of the Langley transonic tunnel in the open slotted test section. Results regarding test-section calibration, including flow uniformity, calibration, and angularity, model testing and boundary interference, and reduction of interference are provided.

From abstract: The Legin group area comprises five privately owned claims, nine Government claims, and some public land. The area is in parts of secs. 28 and 29, T. 43 N., R. 19 W., New Mexico principal meridian, San Miguel County, Colo. It is about 45 miles from the Government mill at Monticello, Utah, and 50 miles from the Vanadium Corporation of America mill at Naturita, Colo. The Legin group area has yielded a total production of more than 18,000 short tons of carnotite ore that averaged 0.32 percent U30 and 2.5 percent V 205 . Most of this production was accomplished during the years from 1935 to 1944, and from 1949 to October 1951.

The Redox Plant operated at a 76.7% time efficiency (IAF basis) and averaged 3.16 tons of uranium per operating day during the month. During the period from July 4 through July 13, 38,000 gallons of 72% ANN from Tygon-lined storage tank SS-112 were used in aqueous salt solution make-ups with some emulsion difficulty and fission-product carry-over resulting. New ANN, from stainless-steel tanks, was used for the balance of the month. An extensive (thermally) hot 60% HNO{sub 3} cleanout was given to the IA, IB, 2D, 3D, 2A, and 3A columns and associated salt solution head tanks to prepare the solvent-extraction battery for operation using 90-day `cooled` uranium. Continuous cross-over oxidation to improve 2A Column waste losses, and employment of KOH (vice NaOH) in 2DS, ICU, and 2EU butt additions to minimize Na in 3EU, were begun concurrently on July 20. Aged (90-day) uranium in head-end treated feed batches, was started to the IA Column on July 21, with early data indicating adequate two-cycle decontamination for both uranium and plutonium.

Quarterly progress reports on various projects in the Chemistry Division.

None

Note presenting experimental data demonstrating the decrease in stream Mach number observed to occur as the pressure of the inducing air in an induction nozzle was increased in the high-subsonic speed range. This performance characteristic was analytically demonstrated to be associated with choking of the induced flow.