Circular presenting a description of the Bernard 80 aircraft. Details are provided on the body shape, wings, ribs, fuel requirements, and flight characteristics.

Circular presenting a description of the Mono-Spar light airplane, which is a small twin-engined low-wing cabin monoplane. A description of the design, structural features, characteristics, flying qualities, photographs, and drawings are provided.

The following discussion is at first restricted to the light-oil engines now in use. We shall consider how far it is possible to reduce fire hazards by changes in the design of the engines and carburetors and in the arrangement of the fuel pipes.

This report deals first with the fundamental data required for the investigation. These are chiefly the aerodynamic forces and moments acting on an airplane in a flat spin. It is shown that these forces and moments depend principally on the angle of attack and on the rotation about the path axis, and can therefore either be measured in a wind tunnel or calculated from wind-tunnel measurements of lift, drag and moment about the leading edge of the wing of an airplane model at rest.

The purpose of the study was to develop improvements in the current methods for the calculation of the loads in members of metal truss wing spars which are subjected to combined bending and compression. The theory developed here has two important practical applications. One is the calculation of the effective moment of inertia of a truss spar from the geometry of the spar and the loads to which the spar is to be subjected. The second is the determination of the most economical location of metal for stiffening a truss spar which has too much deflection.

"The effect of various injection-valve opening pressures on the spray-tip penetration was determined for several injection pressure. A common-rail fuel injection system was used. For a given injection pressure a maximum rate of penetration was obtained with an injection-valve opening pressure equal to the injection pressure" (p. 1).

"This paper is the first of a series covering an investigation of a family of airfoils all formed from a basic profile. It gives in preliminary form the results of six symmetrical airfoils, differing only in maximum thickness. The maximum thickness-to-chord ratios are 0.06, 0.09, 0.12, 0.15, 0.18, and 0.21" (p. 1).

"It seems hardly necessary to use a supercharger near sea level simply to mix the gases. The importance of the supercharger will increase with the use of heavy fuels. Before long we shall probably be using two-stroke-cycle and four-stroke-cycle scavenging engines on airplanes. In accord with the present tendency, we shall present here the French solutions of the problem in a practical rather than in a purely theoretical manner" (p. 1).

With the object of further clarifying the problem of spinning, the equilibrium of the forces and moments acting on an airplane is discussed in light of the most recent test data. Convinced that in a spin the flight attitude by only small angles of yaw is more or less completely steady, the study is primarily devoted to an investigation of steady spin with no side slip. At small angles, wholly arbitrary and perfectly steady spins may be forced, depending on the type of control displacements. But at large angles only very steep and only "approaching steady" spins are possible, no matter what the control displacements.

This report presents an investigation of the design and construction of various types of landing gears. Some of the items discussed include: chassises, wheels, shock absorbers (rubber disk and rubber cord), as well as oleopneumatic shock absorbers. Various types of landing gears are also discussed such as the Messier, Bendix, Vickers, and Bleriot.