The development of the reactor layout is continuing. New features that have been incorporated because of stress, fluid flow, or fabricability considerations include an elliptical fuel expansion tank, a rounded dome to enclose the top of the reactor, a newly designed sodium pump impeller, and other related items. Recently completed heat exchanger tests yielded consistent data from which a series of heat exchangers is being designed. The most promising of these will be chosen for the ART.

Technical report calculating "effective removal cross sections" for Pb, Fe and O from measurements of fast neutron does in the water surrounding the BSF reactor. The values for Pb and Fe agree quite well with those previously determined from Lid tank data, whereas that for O is somewhat lower. [From Abstract]

Progress report of the Oak Ridge National Laboratory Analytical Chemistry Division providing updates on various projects, experiments, and other work in ionic analyses, analytical instrumentation, radiochemical analyses, activation analyses, spectrochemical analyses, inorganic preparations, optical and electron microscopy.

Report documenting ongoing research and developments at the Oak Ridge National Laboratory's Gas-Cooled Reactor Project. From summary: "A study was made of the effect of the energy of extraneous source neutrons on the amplitudes of higher modes in the flux distribution of a subcritical reactor."

Report issued by the Oak Ridge National Laboratory displaying a single chart showing measurements of the gamma-ray, fast-neutron, and thermal-neutron dose rates.

Report that "compares gas turbines with steam turbines as means of producing electric power from gas-cooled reactors with all-ceramic fuel elements." (p. 1)

The Turco 4501 process is recommended for the decontamination of the PRFR pilot leaching plant equipment. The caustic-tartrate-nitric acid process is recommended for the decontamination of the cell and the equipment exterior.

A method for determining the concentration of Li6 in aqueous solution has been tested using the nuclear reactions Li6 (n,α)H3 and O16 (H3,n)F18. Annihilation 7 radiation of induced 1.87 hour F18 radioactivity was counted with a well-type scintillation counter, and the radioactivity per millimole of lithium was found to be independent of lithium concentration below about 0.2moles/liter. The sensitivity limit for detecting lithium is less than 0.1 micromole (0.0075 micromole Li6).

Preliminary experiments have been conducted to evaluate the use of the nuclear reactions Li6 (n,α)H3 and O16(H13,n)F18 to determine the thickness of oxide films on metals. Sheets of thin paper and of aluminum, imbedded in powdered LiF, were irradiated with pile neutrons at a flux of 6 x 10^11 n/cm^2/sec and counted with an end-window proportional counter. A saturation activity of 1.87 hr F18 of 150 dis/min per microgram of oxygen was observed in the paper, but radioactivity due to impurities masked F18 in the aluminum. It is concluded that a 1 A (0.01 μgm/cm^2) oxide film thickness may be measured by a neutron irradiation at a flux of 10^14 n/cm^2/sec but chemical separation of induced radioactivity from the bulk metal is essential.

Methods for the determination of plutonium and uranium in highly radioactive scrup dissolver solutions have been developed. Plutonium was separated from the dissolver solutions by solvent-extraction and ion-exchange techniques and determined by potentiometric titration. Uranium was separated by ion exchange and determined by potentiometric titration. Solutions that were similar to the actual dissolver solutions and that contained known amounts of plutonium and uranium were analyzed by these methods. Evaluation of the data secured for the determination of plutonium and uranium by the methods given herein indicated that, within the limits of the precision of the methods, there was no bias. The precision of the data obtained for the determination of plutonium, expressed as the relative standard deviation, was better than 2% for plutonium in the concentration range of 0.27 to 0.64 mg/ml. The precision for uranium was estimated to be about 0.2% for uranium concentrations of 425 mg/ml. These methods and the data obtained by then are discussed in this report; the procedures are appended.

The nil-ductility-transition (NDT) temperature, as defined by the Naval Research Laboratory drop-weight test, was determined on the A212B carbon-silicon steel used in the pressure vessel of the N. S. Savannah nuclear reactor. Correlations were made with the Charpy-V-notch impact energy at NDT. Specimens taken at two different thickness location from materials used in the upper closure head of the reactor vessel yielded NDT temperatures of 0 - 20°F which correspond to Charpy-V-notch impact energies of 11-19 ft-lb. Testing of as-received material used in the lower closure head indicated that the NDT temperature was 50°F which was equivalent to an average Charpy-V-notch impact energy of 12 ft-lb. After normalizing and stress-relieving this material, in order to more closely approximate the final condition of the reactor vessel, NDT was reduced to less than 10°F.

A theoretical and experimental investigation of the coefficient for diffusion of ions across a magnetic field Is described. The resultant diffusion coefficient is found to vary inversely as the square of the magnetic field strength, in accord with the usual collison-diffusion theory. The magnitude of the coefficient is much larger (x700) than the coefficient predicted by the usual ambipolar diffusion theory. This discrepancy is resolved by showing that diffusion across a magnetic field is not ambipolar in character in most arc experiments. The final experimental and theoretical values are in good agreement, and it is unecessary to postulate any additional diffusion mechanisms, such as plasma oscillations.

From abstract: "The variation of the reactivity of a pile as a function of width of a transverse gap is obtained. The method involves first finding the boundary condition satisfied by the flux at the gap face. This, in principle, provides enough information for a complete solution of the pile equations. A method for calculating the reactivity change is presented. The calculated reactivity is compared with experiment and a brief discussion of the validity of the approximations is given."

The nuclear safety portion of this report is inclined to ignore the factors by which safety limits can be increased. It makes no mention of the control that can be exercised by limiting the assay of the U-235 being processed in the plant. From some of the previous reports, it is apparent that this plant is not anticipating processing U-235 of assay greater than approximately 20%. At this value, many of the numbers that are presented in the tables could be increased markedly. Rough examination indicates that these values all refer to top product U-235. The general discussion is, however, excellent. The references apparently used are those unclassified references with which we are all familiar and think highly of. We would recommend the inclusion of TID-7016.

Two 500-kw fused-fluoride-to-Nak heat exchangers, two 500-kw NaK-to-air radiators, and a 20-tube high-velocity heat exchanger were fabricated for a heat-exchanger development program. A construction procedure, utilizing both inert-arc-welding and high temperature dry-hydrogen brazing, was used successfully on all of the units. The tube-to-header joints were welded and back-brazed; the manifold joints were inert-arc-welded with full penetration; and the tube-to-fin joints were brazed. A detailed description of the fabrication of each type of component is discussed and a cost analysis of the 500-kw units is presented.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities.

Report documenting the design and testing progress of the Oak Ridge National Laboratory's Gas-Cooled Reactor Program.

This quarterly progress report details the ongoing research happening at the Oak Ridge National Laboratory. In particular, this report discusses the current status of the Homogenous Reactor Experiment, boiling reactor and slurry studies, and general homogenous reactor studies.

Part I. Experimental Reactors: The effect of prompt-neutron lifetime upon reactor safety was investigated for the HRT. It was found that for a given pressure rise the allowable rate of reactivity addition was relatively insensitive to the average prompt-neutron lifetime, although the rate de creased somewhat with decreasing lifetime for the higher pressure rises. With only source neutrons present and the reactor initially subcritical, the allowable rate was practically independent of the initial value of k£. For a core-pressure rise of 400 psi, the corresponding rate of reactivity addition was about 0.8% per second; for a pressure rise of 4000 psi, the rate was 2.5 to 3.0% per second. Part II. Thorium Breeder Reactor: An economic study of one-region thorium breeder reactors was completed. Where possible, the process characteristics and cost factors were the same as those used previously in studies of two-region-type reactors. The mini mum-cost reactor is about 12 ft in diameter, operating with 260 g of thorium per liter on a chemical processing cycle of about 450 days. The ratio of U232 to U233 produced is approximately 2 x 10~4 VIM in the minimum-cost one-region system, compared with 4 x 10 5 in the two-region system. The …

Laboratory fabrication and testing of an inline densimeter.

Tests were conducted to determine methods of removing scale deposits from the HRT heat exchangers. A mockup of the heat exchanger header was cleared of a deposit of iron rust by reverse flushing at a flow rate below 75 gpm. A tube bundle consisting of 109 1/4in. O.D. x 0.049 in. wall tubes was plugged with rust. Approximately 80% of these tubes were unplugged by using a 70 psi water pressure differential in combination with vibration from a pneumatic rivet gun. No mechanical method was employed in the tests which could clear the remaining tubes.

Report discussing the progress of various research projects by members of the Mathematics Panel at Oak Ridge National Laboratory for the quarter ending April 30, 1952.

Report containing ongoing projects and experiments undertaken by the Oak Ridge National Laboratory's Molten-Salt Reactor Program.

In connection with the program of the measurement of eta for U233, several critical experiments have been performed by R. Gwin and D. W. Magnuson of ORML with light water solutions of uranyl nitrate (highly enriched in either U233 or U35) in an essentially bare sphere 27 inches in diameter. This report presents the results of two multigroup-diffusion-theory calculations for the above experiments performed by C. B. Mills and associated at Los Alamos. Assumer cross sections, material concentrations detailed neutron balances and a comparison with elementary theory are included. The agreement between the calculated and experimental multiplication constants is excellent for the multigroup calculation but only fair for the elementary calculation. The latter method overestimates the fast leakage so that the computed multiplication constant is less than that found experimentally.