Report presenting an investigation in the full-scale tunnel to determine the effects of the low-speed aerodynamic characteristics of blowing air over the trailing-edge flap of a large-scale wing-body-tail model. Results regarding half-span flaps and full-span flaps, pitching-moment and longitudinal trim characteristics, drag characteristics, lift-drag ratio, and lateral control are provided.

"Approximately 2,000 flights of rocket-propelled models have been made in which model configuration, model size, type and number of booster rockets, number of booster stages, and booster arrangements varied. A brief summary of the results obtained with some of the more unusual arrangements, descriptions of boosting hardware and techniques, and discussions of some factors responsible for the choice of these configurations are presented in this paper. The results show that unconventional boosting techniques may be used successfully when conventional tandem arrangements are unsuitable or unwieldy" (p. 1).

Report presenting experimental data from calm- and rough-water landing impacts with a dynamic model of a seaplane incorporating a flat-bottom hydro-ski mounted on a rigid strut and on a shock-absorber strut. Results regarding the fixed-ski case and translating-ski case are provided.

Report presenting an investigation using rocket-propelled model of the Convair B-58 supersonic bomber. Drag at trim lift was obtained for a range of Mach and Reynolds numbers and is compared to data from several other testing facilities.

Memorandum presenting an investigation utilizing a 1/15-scale rocket-propelled model of the Convair B-58 supersonic bomber. The drag at model trim lift was obtained at a range of Mach and Reynolds numbers. A comparison of the drag at transonic speeds and approximately the same Reynolds number showed excellent agreement.

Report presenting an investigation to determine the effect of conical camber on the drag due to lift and on the static longitudinal, lateral, and directional stability characteristics of an aspect-ratio-3, 45 degree sweptback wing in combination with a streamline body. The addition of conical camber to the basic wing reduced the drag due to lift at moderate and large lift coefficients and increased the maximum lift-drag ratios.

Memorandum presenting a systematic transonic zero-lift drag investigation utilizing a swept-wing configuration with three different ratios of wing to fuselage size utilizing a 6-inch helium gun. The experiments and comparisons with other results indicated that the reduction of pressure drag obtainable from partial indentation is approximately proportional to the amount of indentation employed up to a Mach number of 1.3. Results regarding the basic data, total drag, pressure drag, equivalent bodies, and special projections are provided.

Report presenting the average heat-transfer to the forward half of a circular cylinder measured in a blowdown jet at a stream Mach number of 4.15. Most of the tests was made at a wall-to-stagnation temperature ratio of about 0.8. Report presenting pressure distributions, heat transfer and recovery temperatures, and effect of yaw on transition are provided.

Report presenting an investigation at Mach number 5.20 to determine the longitudinal aerodynamic characteristics of a number of flat-bottom bodies which were investigated for possible hypersonic applications. The bodies were tested at positive and negative angles of attack to simulate flat-bottom and flat-top arrangements.

Report presenting an investigation of a helicopter pressure-jet system. The effects of tip speed, fuel-air ratio, and pressure ratio on the propulsive characteristics of the pressure-jet system have been determined for a range of tip seeds, blade-root stagnation-pressure ratios, and fuel-air ratios. Results regarding tip-burner specific propulsive horsepower, propulsive horsepower per unit mean duct area, tip-burner specific fuel consumption, ratio of propulsive horsepower to equivalent air horsepower, effect of whirling on tip-unit thrust, effect of whirling on the tip-burner inlet pressure, effect of auxiliary fuel flow, power-off drag of tip units, and overall specific fuel consumption of pressure-jet system are provided.

Report presenting lift and drag characteristics of the Convair YF-102 airplane for symmetrical wing configuration and for the cambered wing configuration. Data were obtained for a variety of lift coefficients, altitudes, and Mach numbers. Results regarding lift, drag, and some flight-tunnel comparisons are provided.

Report presenting vibratory stress measurements on a supersonic-type propeller for forward Mach number up to 0.95. Results regarding the bending stress and torsion stress are provided.

Report presenting a flight investigation of a rocket-launched solid-fuel ram-jet engine designed to bypass cooling air around the fuel charge. Having an internally cooled combustor averted combustor burn-out during the flight test. Results regarding acceleration, altitude, air specific impulse, and fuel specific impulse are provided.

Report presenting a flight investigation of a rocket-launched solid-fuel ram-jet engine designed to bypass cooling air around the fuel charge. The internally cooled combustor averted combustor burn-out during the flight test. Results regarding the net thrust coefficient, gross thrust coefficient, time history of the air specific impulse, and total fuel load are provided.

Force and pressure distribution studies to high angles of attack on all-movable triangular and rectangular wings in combination with body at supersonic speeds. The ranges of aspect ratios were, for the triangular wings, 3/8 to 4, and for the rectangular wings, 1 to 3.

Report presenting an investigation to determine the aerodynamic characteristics of bodies with elliptical and triangular cross sections and to compare the data with a body with circular cross sections. Force tests to determine lift, drag, and pitching-moment characteristics as well as pressure-distribution measurements were made for an angle of attack range.

Report presenting aerodynamic-heating data obtained on a modified-fineness-ratio-5.0 Von Karman nose shape at free-stream Mach numbers up to 10.4 with a rocket-propelled model. Transient skin temperatures were measured on the nose, and a maximum temperature of 1,663 degrees R was measured after maximum Mach number was obtained.

Memorandum presenting a flight investigation to determine the effect of a propulsive jet on the zero-lift drag characteristics of two twin-exit boat-tailed bodies at transonic speeds. The two models had ratios of jet area to base area of 0.394 and 0.590 and covered a Mach number range of 0.8 to 1.15. A slight reduction in drag coefficients from power-off values are obtained during power-on flight for both models.

Report presenting an investigation of heat transfer and pressure distribution on flared bodies under laminar, transitional, and turbulent boundary-layer conditions at Mach number 6.8. Information about flow characteristics, flare drag, and the relationship between flare drag and flare heating is provided.

Translating spike inlet air flow regulation characteristics from transonic to supersonic speeds at zero angle of attack.

Report presenting an investigation of the intensity of root-mean-square pressure pulsations and root-mean-square normal-force-coefficient fluctuations conducted on two high-lift airfoils and two 6-series airfoils. Results regarding the factors affecting comparison of data from various test facilities, root-mean-square pressure pulsations, and root-mean-square force fluctuations are provided.

Memorandum presenting a flight investigation of the Bell X-5 variable-sweep research airplane in the 45 degree wing sweptback configuration over a range of Mach numbers. Lift and drag values are presented and a comparison is made with data obtained with a wing sweepback of 59 degrees.

Report presenting a wind-tunnel investigation at low speeds of a thin aspect-ratio-1.85 pointed-wing-fuselage model with double slotted flaps, including the effects of a straight and delta horizontal tail on the static longitudinal stability and the effect of a delta vertical tail on the static lateral stability. Results regarding the longitudinal aerodynamic characteristics and lateral stability characteristics are provided.

Memorandum presenting an investigation of a number of short turbojet combustor configurations for hydrogen fuel in a quarter-annulus duct. The best combustor liner consisted of an annular primary zone and a secondary zone composed of T-shaped channels sloping from the primary zone to the combustor wall.