Report presenting a free-jet investigation of the performance, burner-shell cooling, and ignition characteristics of a flight-weight 48-inch-diameter XRJ47-W-5 ramjet engine at an inlet Mach number of 2.75 and an angle of attack of 3 degrees. Data were obtained over a range of altitudes, inlet temperatures, and fuel-air ratios.

"The results of an investigation of several internal water-inertia-separation inlets consisting of a main duct and an alternate duct designed to prevent automatically the entrance of large quantities of water into a turbojet engine in icing conditions are presented. Total-pressure losses and icing characteristics for a direct-ram inlet and the inertia-separation inlets are compared at similar aerodynamic and simulated icing conditions. Complete ice protection for inlet guide vanes could not be achieved with the inertia-separation inlets investigated" (p. 1).

Memorandum presenting an investigation at Mach numbers of 1.61 and 2.01 to examine the characteristics of a series of nine spoiler-type controls on a trapezoidal wing with the leading edge swept back 23 degrees, an aspect ratio of 3.1, and a taper ratio of 0.4. Results regarding pressure distributions, spanwise loadings, and integrated coefficients are provided.

Memorandum presenting an investigation of the effects of compressibility on the forces, pitching moments, and surface pressures on a wing-nacelle combination. The leading edge of the wing was swept back 37.25 degrees and the nacelle was a body of revolution with a fineness ratio of 6.5. The effects of compressibility on the surface pressures and on the drag of a body of revolution similar to the nacelle were also determined.

Report presenting an investigation of the intensity of root-mean-square pressure pulsations and root-mean-square normal-force-coefficient fluctuations conducted on two high-lift airfoils and two 6-series airfoils. Results regarding the factors affecting comparison of data from various test facilities, root-mean-square pressure pulsations, and root-mean-square force fluctuations are provided.

"A theoretical analysis is presented for obtaining by use of Theodorsen's propeller theory the load distribution along a propeller radius to give the optimum propeller efficiency for any design condition. Examples are included to illustrate the method of obtaining the optimum load distributions for both single-rotating and dual-rotating propellers" (p. 1).

Report presenting an investigation to determine and improve on the foreign-object-retention capabilities and pressure-loss characteristics of rectractable engine-inlet screens. Testing occurred with two commerically made retractable screens installed in the engine-inlet sections for which they were designed. Results regarding the retention for both the original and modified screens and pressure tests are provided.

Characteristic exhaust velocity of a 200-pound-thrust rocket engine was evaluated for fuel temperatures of -90 degrees, and 200 degrees f with a spray formed by two impinging heptane jets reacting in a highly atomized oxygen atmosphere. Tests covered a range of mixture ratios and chamber lengths. The characteristic exhaust-velocity efficiency increased 2 percent for a 290 degree f increase in fuel temperature. This increase in performance can be compared with that obtained by increasing chamber length by about 1/2 inch. The result agrees with the fuel-temperature effect predicted from an analysis based on droplet evaporation theory. Mixture ratio markedly affected characteristic exhaust velocity efficiency, but total flow rate and fuel temperature did not.

Report presenting an evaluation of a number of factors affecting engine-airframe arrangements in terms of range. Appropriate equations are developed and evaluated for a range of Mach numbers, ramjet and turbojet engines at several cycle temperatures, and two airplane lift-drag ratios. Some of the factors explored include inlet locations, jet cant for lift, engine moments for trim, a combination of the three factors, and the use of boundary layer in the engine.

Report presenting an investigation at two Mach numbers to examine the characteristics of a series of nine spoiler-type controls on a trapezoidal wing with the leading edge swept back 23 degrees, an aspect ratio of 3.1, and a taper ratio of 0.4. Results of the tests indicated that the incremental pressure distributions due to spoiler were in agreement with previous results as long as the spoiler was not too close to a break in the wing surface or the wing tip.

Report presenting zero-lift drag data obtained on a series of six bomb shapes. Five configurations had the same body shape with different body-surface conditions and profile and plan form of fins, and the sixth had a different and longer body shape. Results regarding the effect of blunt trailing edge, blunt leading edge, fin thickness, and body surface are provided.