Results of four experimental heats run at the end of the G-5 contract in the National Carbon Company Clarksburg production furnaces.

Investigation to evaluate some of the designs, techniques, and methods for fabrication of a root pass.

Development of a fabrication process and the manufacture of 95 PRTR process tubes demonstrates that the commercial fabrication of high quality Zircaloy-2 pressure tubing is feasible.

From introduction: "The development and demonstration of the natural uranium reprocessed plutonium cycle in power reactors is an important phase of the peaceful applications of nuclear energy."

Report that "describes the selection of "standard fuel cores for calibrating an ultrasonic tester designated UT-2C" (p. 3) at Hanford Laboratories.

"The purpose of this present document is twofold: (1) To acquaint the reader with the planning of the radiochemical laboratory designed for the analytical control of the Radio-lanthanum Process. (2) To define the terminal status of the design of this laboratory and its equipment."

The construction and operation of a fission gas generator, containing about 25 grams of uranium in the form of a powder with a high specific surface, are described in detail. The purpose of the work discussed in this report was to examine the feasibility of producing, separating, and assaying samples of Xe135 in preparation for a proposed measurement of the neutron cross section of this isotope. Krypton and xenon are separated by selective adsorption on charcoal at reduced temperature while iodine is removed by charcoal sorption at room temperature.

The stability of fluorothene (polytrifluorochloroethylene, Kel-F) to gamma radiation has been investigated to estimate the probable life expectancy of fluorothene equipment exposed to Purex process solutions. Samples of fluorothene were exposed to total gamma radiation dosages up to 10 degree R. The results of these tests substantiate the findings reported by Sisman and Bopp in their compilation of data on the affects of radiation on plastics.

The effects of oxidation and irradiation on the microsurface structure of pile graphite have been investigated by measuring the surface area and pore size distribution of several samples. The results obtained for both oxidized and irradiated graphite samples indicate that changes in surface characteristics which occur are determined by the flux, temperature of irradiation, and gaseous atmosphere in which the radiation takes place.

Ionization measurements of water vapor in vapor-liquid equilibrium were made with a series of chambers on a tritiated water sample which was prepared by burning T2 to T2O and diluting it with H2O. A correction was made for the difference of vapor pressures of HTO and H2O. The effect of HTO adsorbed on chamber walls and electrodes was eliminated from the final result. Using Gerbes data on the number of electron volts to produce an ion pair in air, agreement obtained between the measured source strength and the source strength as computed from pressure, temperature, volume, purity, and dilution data on the original gaseous T2 sample.