"Contact conductances for three semi-smooth and rough stainless steel contacts involving six steels are determined. The procedure and equipment used are fully described, and the results are given. Graphs display thermal conductance and conductivity versus pressure and temperature."

Report documenting the progress of the Army Gas-Cooled Reactor Systems Program to develop a mobile nuclear power plant for military field operation.

Report discussing the mechanics of X-Ray and COMBO computer programs.

Progress report for the Piqua Reactor Operations Analysis Program describing observations and analyses at the Piqua Nuclear Power Facility (PNPF). The program goals are to monitor operations and collect data in order to ensure that the plant's operation is safe, to improve design and performance, to evaluate the performance and lifetime of the plant's components and systems, to evaluate plant safety and safeguards, and to disseminate all information to the scientific community.

This preliminary Hazards Summary Report presents to the Atomic Energy Commission (AEC), Division of Licensing and Regulation, a description of the Nuclear Development Center, the characteristics of the proposed site, and an evaluation of the potential hazards associated with operating the test reactor at this location.

The nuclear characteristics of the CETR are described. Core operating lifetime, control-rod worth, and power density distribution are discussed in relation to maximizing the core operating life. Other objectives of nuclear design are to minimize the power-density variation and to assure control of the reactor.

This report describes the critical experiments with pin-type oxide fuel elements for the Consolidated Edison Thorium Reactor (CETR). This report also describes the measurements and gives a brief interpretation of the results in some cases

From introduction: This report presents the results of a study of large nuclear reactor systems for supplying energy for the distillation of sea water.

Abstract: this report discusses and summarizes all stress analysis done on the SNAP 10A system; it also mentions many of the structural tests which were accomplished.

Report issued by the Argonne national Laboratory discussing a technical and economic evaluation of a direct-cycle light-water boiling reactor designed for natural circulation and internal steam-water separation. The reference 100-Mw(e) reactor power plant design evolved from the study should have the best chance (compared to similar plants) of approaching the 8 to 9 mill/kwh total power-cost level. This report includes tables, and illustrations.

Technical report. From Abstract : "Optimum conditions were determined for the precipitation of neptunium (IV) peroxide from nitric acid solutions. The results indicate that the precipitation could be applied successfully on a plant scale. ... Two crystalline modifications of the peroxide were prepared; these two crystalline structures were similar to structures previously reported for plutonium peroxide."

Report discussing the methods, data, and analysis of results for "An experimental study designed to provide a basis for estimating protection against fallout radiation " (p. v) using one- and two-story structures with basements.

The report is about the geophysical year oceanographic program of the Argentine Republic.

Technical report. From Abstract : "Thermal, metallographic, and vapor pressure data were obtained to establish the phase boundaries and the standard free energy, enthalpy, and entropy of formation for the compounds in the yttrium-zinc system."

Abstract: Hydrodynamic flow studies were conducted on a full scale model of the SM-2 reactor vessel and core. Test fluid was water at 200 psi and 200 degree F. Test facilities, model, and instrumentation design are discussed. Flow distribution in the stationary fuel elements, lattices, and control rods of the second pass was investigated. Pressure losses through the various core components were measured and are compared with calculated values. Observed over-all pressure drop was 71 feet of water at 200 degree F, 31% higher than predicted, part of which was due to presence of instrument leads. Element to element flow distribution varied approximately +-8% from pass average. Channel-to-channel stationary element flow distribution varied approximately +-10% from element average and control rod flow distribution varied from +-8.9% to +-6.4 and -11.6% depending upon rod locations. These variations exceed the original goals of a +-10% and +-12% combined deviation for stationary and control rod elements respectively, but are satisfactory in relation to thermal design. There was no indication of unsatisfactory structural performance of any components under hydrodynamic loadings up to 130% of design values. The test program was terminated after determining flow distribution in the reference core design, omitting any work on …

From abstract: "Study of radiation effects upon the tensile properties of the alloys, corrosion behavior in the absence and presence of stress, effect of prolonged, high temperature exposures upon structure sensitive properties of the alloys, and physical metallurgical changes as a function of exposure in a superheat environment.

Report describing the Hanford Laboratory controlled potential coulometer. This includes the theory behind the coulometer, details of its circuitry, and performance tests. Appendix begins on page 23.

Many measurement of neutron spectra have been made in water assemblies. In these system a large part of the spectrum is given by an essentially Maxwellian distribution at the moderator temperature which is insensitive to the scattering model. Hence, the test of the energy exchange scattering kernel is in the difference of the spectrum and the fundamental or Maxwellian component. The figure shows the spectrum for the Nelkin model. Once the fundamental has been subtracted neither theoretical model seems to fit the data extremely well. Below kT the Nelkin model is a closer fit than the gas model but it underestimates the deviation from the Maxwellian whereas in the joining region it overestimates the distortion.

From abstract: A development program was initiated to design, fabricate and test an absorber column with a 10 to 12 year lifetime, for use in the proposed LSGR.

From abstract: The results of a feasibility study of a 1000-Mwe sodium-cooled fast-reactor are presented.

Report that describes the Hanford Laboratories MINIMIZER code and demonstrates its accuracy in providing fissile fuel costs in a precise and automatic manner.

Technical report. From Abstract : "A step phenomenon in the nuclidic mass excess surface associated with magic numbers N, Z = 8 and 20 is shown to exist, whereas only breaks occur at higher magic numbers. Excited states are included which reveals possible smooth trends within Shell-Model subshells."

From introduction: "In order to locate systematic trends of states with a certain angular momentum and parity Jπ in nuclei having constant neutron excess, both the ground state and the level energies will be considered simultaneously: we plot the total nuclear binding energy or nuclidic mass excess of excited states, whereby the ground states appear as a special case. Such a natural correlation of level schemes has been employed before Inglis already in 1953."

Technical report. From Abstract : "A system has been developed to program a digital computer in much the same manner as an analog computer is programmed. Properties of a general purpose analog computer and a digital differential analyzer are combined to yield a program which employs, as input, standard data cards prepared from a diagram analogous to an analog computer diagram. The capacity of the system is much greater than that of most analog computers, making it applicable to large simulation problems. No scaling is required. The system is compatible with the Fortran symbolic language and may be used as part of a larger digital computer program. It may be applied to the more general types of boundary value problems arising in process simulation in addition to the initial value problems ordinarily solved on analog computers. It is particularly well adapted to non-linear problems and to control problems involving large transport delays. The program operates in basic machine language and, when used by itself, requires no compilation time."