We have measured the energy deposited in two types of composite targets by a number of charged-particle beams: targets made of /sup 238/U, Lucite, and polyethylene were exposed to 0.26-GeV protons and 0.33-GeV deuterons, and aluminum-Lucite composites were exposed to 0.5-GeV electrons. In addition, we measured neutrons and gamma rays emitted from solid targets of various materials (including /sup 238/U and iron) exposed to 0.26-GeV protons and 0.33-GeV deuterons. We used passive detectors (thermoluminescence dosimeters, Lexan fission track recorders, and photographic emulsions) to measure the nonfission dose and the fission-fragment dose from the primary beam and its shower of products. Measurements were made at various depths and radial positions in the targets. Plots and numerical values of the measured doses are presented. The emission of neutrons and gamma rays was measured with a liquid-deuterated-benzene detector. In general, the dose profile with depth is similar for 0.26-GeV protons and 0.33-GeV deuterons. The ratio of return neutrons to gamma rays increases with increasing target mass number. Deuterons, however, produce from 1.7 to 5.8 times as many neutrons and gamma rays per particle as do protons.

This report has been prepared specifically for ultrasonic transducer users within the Nondestructive Testing Evaluation (NDE) community of the weapons complex. The purpose of the report is to establish an initial set of uniform procedures for measuring and recording transducer performance data, and to establish a common foundation on which more comprehensive transducer performance evaluations may be added as future transducer performance criteria expands. Transducer parameters and the problems with measuring them are discussed and procedures for measuring transducer performance are recommended with special precautionary notes regarding critical aspects of each measurement. An important consideration regarding the recommended procedures is the cost of implementation. There are two distinct needs for transducer performance characterization in the complex. Production oriented users need a quick, reliable means to check a transducer to ascertain its suitability for continued service. Development groups and the Transducer Center need a comprehensive characterization means to collect adequate data to evaluate theoretical concepts or to build exact replacement transducers. The instrumentation, equipment, and procedures recommended for monitoring production transducers are utilitarian and provide only that information needed to determine transducer condition.

A site visit was made in company with the DOE-OPTA-EA Safety and Health Official for the purpose of providing that official with technical assistance in evaluating the validity of an earlier DOE-OPTA recommendation exempting this facility from the Safety and Analysis and Review backfit requirements of DOE Order 5481.1. A further purpose of the visit was to assess and evaluate the occupational safety and health program at this facility, as compared with the criteria and guidelines contained in ASFE Order 5481.1. Adequate documentation regarding compliance with codes, standards, and regulations were observed at this facility. There is in existence an ongoing continuous safety analysis effort for both modifications or additions to this facility. Adequate environmental safeguards and plans and procedures were observed. The SARS backfit exemption is appropriate. The occupational safety and health program is in many ways a model for the scope of work and nature of hazards involved, and is consistent with ASFE guidelines and statutory requirements.

This report provides information on observations, findings, and conclusions arising from a site visit to the Exxon Donor Solvent Plant, Baytown, Texas. That visit was to provide technical assistance and professional services to the DOE/ASFE/OPTA Project Officer regarding verification of his initial determination that this pilot plant is exempt from the SARS backfit requirement (DOE Order 5481.1). A secondary purpose was to obtain further information regarding the occupational safety and health plans and procedures at this new pilot plant facility. It is concluded that a well planned and implemented occupational safety and health program exists at the Exxon Donor Solvent Plant. Excellent manuals regarding general safety requirements and protection against carcinogens have been prepared and distributed. A Safe Operations Committee is in effect as is a Risk Management Committee. Adequate safety and industrial hygiene staff has been assigned and an excellent medical surveillance program has been established. Adequate compliance with environmental codes, standards, and regulations is being achieved. Although this plant is not subject to SARS because of the nature of the contract, adequate documentation exists in any case to exempt it from the SARS backfit requirement.

Weekly newsletter discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.