Abstract: "The possibility of fabricating a lightweight control rod from one of several high cross-section materials was investigated. The major effort was directed toward the development of a titanium-clad rod containing a composite core of 25 weight per cent Gd2O3 in a matrix of titanium. Experimentation on both subscale and full-scale control-rod cores showed that the fabricating behavior of the two was not analogous. To roll the full-scale core successfully, it was necessary to lower the oxide content to 17 weight per cent. Subscale investigations were also carried out on titanium-cadmium, titanium-lanthanum, and titanium-gadolinium alloys."

Technical report investigating the distribution of rare earth elements between a liquid bismuth-uranium solution and fused KCI-LiCi mixtures. Report warrants further research on the liquid bismuth-uranium-fused salt system due to the benefit of continuous fission removal processes.

Abstract: "By a simple illustration it is pointed out that, conceivably, the real coupled character of the general magnetohydrodynamic equations may lead to much slower instability growth rates, if not stabilization, than predicted from the linearized set of equations."

The following report is a quarterly report by the Monsanto Chemical Company for liquid waste disposal research, covering the period between April 1 to June 30, 1949.

Abstract: The data obtained from the radioassay of fish collected in vicinity of the Hanford Works between April, 1948 and June, 1950 are presented. Most of the radioactivity in the fish resulted from the concentration of p32 in the scales, bone, and certain visceral organs. The level of activity density in the fish was influenced by size, feeding habits and metabolic rate in addition to the activity density of the water. Changes in operation of nuclear reactors have resulted in progressive increases in activity densities of fish from one year to the next. The levels of radioactivity are not sufficiently high to be hazardous to either the fish or persons eating them.

The following report is a quarterly report conducted by the Monsanto Chemical Company for liquid waste disposal research, covering the period April through June, 1950. This report discusses experiments that were carried out with both neutralized second-cycle wastes and pure isotope which show that, in general, the presence of fluoride ion does not interfere with the removal of fission products from waste solutions.

Summary: Transition boiling data was taken with an improved flow loop, to explore the influence of loop characteristics on rod temperature fluctuations the transition region was found to be much smaller than for comparable conditions with a different loop. Also the amplitude, and frequency of the temperature oscillations, were significantly less than before. These results indicate that loop characteristic and flow disturbance parameters play a prominent part in governing the transition temperature fluctuations. Additional two-rod transition boiling data are presented. The results include data taken at high wall temperature levels during a demonstration test at low steam qualities, and the effect of a change in rod spacing on heat transfer performance.

Contemplated higher tube power for future reactor operation will probably require a fuel element jacketing material more corrosion resistant than presently available aluminum alloys. Zirconium and its alloys are generally regarded as the most promising jacketing candidates for high temperature operation, particularly for exposures of long duration. In order to obtain assembly, welding, and corrosion data, twenty Al-Si bonded and twenty unbonded Zircaloy fuel elements were prepared for KER loop testing. This report describes the technique developed to weld Zircaloy jacketed fuel elements and presents the results of end closure corrosion testing and metallographic examination.

A better understanding of the maximum operating characteristics that can be achieved with the use of UO2 as a reactor fuel is the primary purpose of this program for Euratom and the Atomic Energy Commission. During this program work will be undertaken in two areas that have been of concern to the reactor core designer for a long time, viz. fission gas release and central melting in fuel rods.

Concurrently with the production of canned uranium slugs for pile operation there arises the problem of nondestructive testing so that no slug which may fail structurally during operation be placed in the pile. The ultimate goal of any such testing program is to devise nondestructive testing methods which will eliminate defective slugs. A secondary goal of the testing program is to learn as much as possible about the construction of the canned slug so that the mechanisms of failure can be understood. Radiography, an increasingly useful nondestructive test method, offered one possible way of investigating this area.

This document authorizes the performance in accordance with the specifications noted, the PRTR Critical Tests described herein. The experiments described have the following objectives:

Technical report describing development of the Clinton alpha amplifier. The circuit for the Clinton alpha amplifier which is used with an Offner scaler is shown attached to the report. It consists of a pre-amplifier mounted in a cylindrical alpha chamber, followed by a three state amplifier and a pulse height selector in a separate cabinet. Pulses are fed from the pulse height selector in the amplifier to the input tube of the Offner scaler. Through the third stage of the amplifier, this circuit is exactly the same as the California circuit now used by the chemical section for alpha counting. A type 961 Offner scaler was used for these tests. None of the latest Offner scalers type961A, were available to us when the tests were made. Method of testing is given, results are tabulated, computations are made, and eight graphs are given. it appears that the Clinton amplifiers used with a Offner scaler will give substantially the same performance as that given by the California circuit.

The objective of the Accurate Nuclear Fuel Burnup Analyses program is to develop more accurate methods for burnup analysis for general use than the current method of analysis of Ca-137 or Sr-90. The program will require from three to five years of effort.

A program is in progress for the design of a zirconium base alloy for steam service as nuclear fuel cladding. Thirty-one alloys selected for study of corrosion rate, hydriding rate and hydrogen embrittlement are in test. The corrosion testing of 1800 coupons to 3000 hours at at 300, 400, and 500 degrees C in refreshed steam has been completed. Statistical data analysis of the corrosion results are reported and alloys showing better corrosion performance at all test temperatures than that for Zircaloy-1 are discussed. Preliminary data for hydrogen uptake after long exposures at 400 and 500 degrees C are presented; the uptake for alloys showing the best corrosion performance is discussed. Post-corrosion mechanical property measurements are also reported along with the preliminary results of x-ray diffraction and metallographic studies relating to hydrogen embrittlement. A wide variation in resistance to embrittlement at a given hydrogen level was observed and can be tentatively correlated with original ductility, crystallographic texture, and hydride platelet orientation. The testing of a second round of ten alloys is also in progress. Studies concerning the mechanism of corrosion and hydriding in zirconium alloy are also reported. The results of recent neutron activation analyses of stripped corrosion films are …

The United States and the European Atomic Energy Community (Euratom), on May 29, and June 18, 1958, signed an agreement which provides a basis for co-operation in programs for the advancement of the peaceful applications of atomic energy. The work described in this report represents the Joint U.S.-Euratom effort. The over-all development program is designed to obtain the test data and operating experience necessary to eventually realize a 50 percent increase in the output of the Garigliano Nuclear Power Station located at Sessa Aurunca (Campania, Italy). Two tasks are in progress: Task III-F involves the preparation of test specimens of reactor vessel material for irradiation; Task IV consists of the formulation of specification for a complete data logging and computer system.

Introduction: The Transition Boiling Heat Transfer Program is sponsored jointly by the USAEC and Euroatom and is being conducted by the General Electric Company. The work commenced on this program February 11, 1963. The objective of this program is to perform basic investigation and measurement of the transition boiling regime in high pressure bulk boiling water flows, with particular emphasis i the high range of steam qualities.

From introduction: "Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC."

This development work was undertaken to investigate and standardize scintillation detector and transistorized circuitry techniques in instruments used for detecting and measuring alpha and beta particles, gamma photons, and both slow and fast neutrons. At the present time, the standard radiation detection instrumentation used at Hanford employ vacuum-tube circuitry with typical detectors being ion chambers, G-M tubes, HF3 tubes, etc. The vacuum tubes require excessive battery power, and some of the circuits are adversely affected by humidity and temperature conditions.

"For a central station reactor power plant of the sodium-graphite type, two designs have been investigated. The first operates as a converter using slightly enriched uranium fuel and produces 150 electrical megawatts. The second operates as a thermal breeder using a U233-Th alloy fuel and produces 300 electrical megawatts. Consideration has also been given to the problem associated with the design and operation of the Sodium Reactor Experiment. All work related to the plutonium plus power sodium-graphite pilot plant, which was undertaken at an earlier date, has been completed."

Various experimenters have shown (H.H. Gersman U.S. Patent 2,335,590, Nov. 30, 1943; Aluminum Co. of America, various technical papers; also CT-482) that when a billet is extruded by proper technique into a rod (or tube by a floating mandril) that flow of material is streamline and and the extruded article is essentially a space replica of the billet, with linearly distorted coordinates. Advantage is taken of this fact in the manufacture of alclad tubing in which a billet containing an inner core of one alloy with the outer part of another alloy cast around it is extruded together into an integral tube, e.g., to combine high corrosion resistance with high strength. The following experiments were carried out because of the desirability of obtaining a control rod which can be water cooled (or immersed in P9) and which contains boron. For some pile structures it may be desirable to have the major portion of the energy released by the neutron absorption of the control rod be spend in the rod itself by the nuclear reactions [formula] rather than in the surrounding media as is the case when absorption of neutrons is by cadmium according to the reaction [formula]. In the later …

At the Montreal colloquium Ahmed urged Oliver to make batches of emulsion which would differ only in gelatin concentration. At that meeting Oliver had reported finding a correlation between grain size and silver ion concentration during precipitation, as implied by Perfilov and his Leningrad colleagues. Ahmad felt that one should have more precise knowledge of the relative influence of gelatin concentration of grain sized and their distribution. The incentive is that, in spite of excellent progress in many laboratories and in consistently dependable production from industry (to us, of course, Ilford is most familiar), nuclear emulsions are needed in a wider variety of sensitivities and grain sizes. Available nuclear emulsions have limitations in sensitivity, discriminatory ability, and concentration of hydrogen nuclei. Fine grain size enhances discriminatory ability. An incentive is also in that there is a shortage of literature dealing with the processes involved in the fundamental steps of emulsion production.

A design study has been made of a graphite superheating reactor, a graphite moderated reactor with a heat rating of 305 Mw which produces superheated steam. It is designed for the production of plutonium and electrical power or for the production of electrical power only. The fuel elements for dual- purpose operation are U metal, while for single purpose action, they are uranium oxide. The fuel elements are cooled by a 7-pass system in which preheated water enters the bottom of the first pass and is discharged as superheated steam at the top of the seventh pass. The reactor control consists of shim control by the gas system, vertical gas-cooled control rods, vertical safety rods, and a ball safety system. Rough cost estimates indicate that the capital cost of the reactor should be comparable to other reactors of similar heat output.

Fillerwelding is a fusion welding process that provides for the automatic addition of controlled amounts of fillerwire during inert-gas-shielded tungsten-arc welding. Fillerwelding aluminum jacketed fuel elements has been successfully demonstrated and is being used on a routine basis. This manual was written to provide the necessary information to operate and maintain the fillerweld equipment.

In recent months, relatively large quantities of neptunium-237 have been recovered from Hanford irradiated uranium. The over-all recovery process consisted of 1) isolation from Purex plant solutions by solvent extraction, to yield an impure neptunium nitrate solution contaminated principally with uranium, plutonium, and fission products (2) purification by anion exchange 3) precipitation of neptunium (IV) oxalate; and 4) calcination of the oxalate to yield neptunium (IV) oxide, NpO2. This paper describes the oxalate precipitation process investigations and results.