Abstract: In one of the final stages of the process at the Mallinckrodt Uranium Refining Center, a 45 per cent nitric acid solution at about 170 F is used to pickle the calcined magnesium fluoride scale off the uranium derbies. The increase in the fluoride-ion content of the bath tends to promote corrosion of the Type 347 stainless tanks. This attack becomes excessive if 0.3 g/liter of fluoride ion or more is present. It was found that if aluminum ion is added to the solution the corrosiveness of the bath can be controlled. Two or three times as much aluminum ion as fluoride ion present is found satisfactory at 170 F. Indications are that the tying up of the fluoride-ion by the complexion [AlF6]8 is responsible for the corrosion control.

Abstract: "Four brazing methods and one other joining process were evaluated for the joining of aluminum spacer fins to flat-plate aluminum-clad fuel elements. None of these methods appear completely suitable for use in a mass-production operation. Furnace brazing and salt-bath brazing were most promising. However, the mechanical problems involved in the application of either process deter their recommendation. Resistance brazing and torch-brazing were proven impractical. The great difference in mass between the two pieces being joined prevents the use of either the resistance or torch method. Pressure bonding is not applicable because of the excessive deformation of parts being joined."

Boron solution circulated through special poison tubes to achieve more variable control of neutron flattening'' was tested in the 100-DR Hanford reactor. About 2700 gallons of irradiated waste Ink solution from Production Test 105-529-A was discharged to an underground crib at 100-DR, after radiochemical analyses and evaluation of radiation protection aspects by the Radiological Sciences Department. In case the Ink method is considered for production use at Hanford in the future, further biological and biophysical study is recommended to determine whether irradiated waste Ink solution may be disposed of into the Columbia River, into the ground near the river, or into the ground several miles from the river. 10 refs, 2 tabs.

This report provides details of a test to determine the feasibility of preventing corrosion of the 107- C retention basins by the installation of a small scale cathodic protection system.

The purpose the production test described in this document was to evaluate by pile irradiation the stability and resistance to rupture of powdered metal compacts.

Abstract: "This is a detailed report on the circuitry, the electrical components, and the electrical engineering problems of Table Top I, the 140-kilojoule experimental model of a magnetic mirror machine being developed at the University of California Radiation Laboratory, Livermore."

Abstract: "A dc magnetic mirror machine has been built and tested by the ARC Research Group. Radiofrequency enhancement has been included in the design through the use of rf plates in the vacuum chamber of the machine. For the proton beams of the order of 1[mu]a, the mirror action has been observed as a function of both the rf voltage and the magnitude of the mirror field relative to the main magnetic field. Current measurements were performed with the aid of a Faraday cup with suitable bias grids."

Thesis discussing the study of deuterons produced at wide angles to a beam of 300 Mev neutrons and a beam of 300 Mev protons. It was observed that the deuterons are formed by "a two step process in which the incident nucleon, or its collision partner, is scattered and then picks up in the same nucleus." Some tritons are also observed, and it is thought that they are formed by the same process as the deuterons. From these findings, the author concludes that "for heavy nuclei, there is a nuclear skin rich in neutrons."

The intent of this manual is to present a description of the main process building, equipment, and auxiliary facilities as well as a process summary. Material is of a scope nature with more detail devoted to features unlike those of existing separations systems. An attempt is made to convey some of the basic design philosophy and the problems encountered in the development of design criteria. This information is written primarily for Separations Section supervision who have not had an opportunity to become conversant with the Purex Project. The manual may also be of assistance in orientation and training of personnel. In order to avoid repetition and duplication of effort, one line service diagrams, equipment sketches, tables, and detailed data are not a part of this manual.

The objective of the experimental studies reported herein was to demonstrate the laboratory-developed mercury-catalyzed dissolving procedure on a pilot-plant scale by conducting a series of test dissolutions of aluminum-jacketed, unirradiated uranium in the 150-gallon downdraft type semiworks dissolver in 321 Building. It was desired to establish: (1) the effect of the larger-scale operation on time cycle; (2) dissolution rates of aluminum and uranium, (3) controllability of the reactions, and (4) the concentration of mercury catalyst required.

During a routine beta-gamma hand and shoe count, an employee discovered that his shoes were contaminated. This document discusses the spread of particulate contamination at the Biophysics Laboratory, Building 329, 300 Area on July 6, 1954.

Abstract: Reconnaissance of Red Rock Valley was begun on December 10, 1953, and completed on February 11, 1954. The mines in the region were investigated and all exposures of Salt Wash were walked. Paleostream directions and alterations of the sandstones were observed and recorded on a base map. No important new mineralization was discovered-and the area is considered to be of no commercial significance if judged by the outcrops alone. However, a vast amount of Salt Wash lies at slight depth directly to the east of the investigated area.

This document presents a summary of work and progress at the Hanford Engineer Works for June 1954. The report is divided into sections by department. A plant wide general summary is included at the beginning of the report, after which the departmental summaries begin. The Manufacturing Department reports plant statistics, and summaries for the Metal Preparation, Reactor and Separation sections. The Engineering Department`s section summaries work for the Technical, Design, and Project Sections. Costs for the various departments are presented in the Financial Department`s summary. The Medical, Radiological Sciences, Utilities and General Services, Employee and Public Relations, and Community Real Estate and Services departments have sections presenting their monthly statistics, work, progress, and summaries.

Introduction: The object of this test work was to determine the practicability of a two-stage leach using ion-exchange as the method of uranium concentration.

A process for recovering vanadium from acid leach liquors by ion exchange using either columns or resin-in-pulp has been developed. The process is economically feasible, and operating techniques were developed which made the process practical from an operating standpoint. The theory, chemistry, and characteristics of the vanadium ion exchange process are fully discussed.

This report addresses the basic research and particle accelerators.

None

None

None

None

None

None

None

None