Xe/D sub 2 cross-section ratios at low X sub Bj from muon scattering at 490 GeV/c (open access)

Xe/D sub 2 cross-section ratios at low X sub Bj from muon scattering at 490 GeV/c

First measurements from the E665 experiment at Fermilab on the relative cross-sections of 490 GeV/c muons scattered from deuterium and xenon targets are presented. The scattered muons were in the kinetic range Q{sup 2} > 0.1(GeV/c){sup 2} and very low x{sub Bj} (0.001 < x{sub Bj} < 0.1). Triggering on events in this kinematic region was accomplished with a special Small Angle Trigger which projected individual beam muons to form a veto region 30 meters from the target. Using this trigger, muons with scattered angles as small as 0.5 milliradians were detected. 8 refs., 6 figs.
Date: June 1990
Creator: Magill, Stephen R.
Object Type: Article
System: The UNT Digital Library
{Xi} ({Omega}) production in Pb + Pb collisions at 158 GeV/c (open access)

{Xi} ({Omega}) production in Pb + Pb collisions at 158 GeV/c

Using the NA49 main TPC, the central production of ({Xi} + {bar {Xi}}) hyperons has been measured in CERN SPS Pb on Pb collisions at 158 GeV/c. The preliminary ({Xi} + {bar {Xi}})/ ({Lambda} + {bar {Lambda}}) ratio, studied at 2.0 < y < 2.6 and 1 < p{sub T} < 3 GeV/c, equals {approximately} (13 {+-} 4)% (systematic error only). It is compatible, within errors, with the previously obtained ratios for central S+S, S+W, and S+Au collisions. The fit to the transferse momentum distribution resulted in an inverse slope parameter T of 297 MeV. At this level of statistics we do not see any noticeable enhancement of hyperon production with the increased volume (and, possibly, degree of equilibration) of the system from S+S to Pb+Pb. This result is unexpected and counterintuitive, and should be further investigated. If confirmed, it will have a significant impact on our understanding of mechanisms leading to the enhanced strangeness production in heavy ion collisions.
Date: June 1, 1997
Creator: Odyniec, G.; Cooper, G.E. & Jacobs, P.
Object Type: Article
System: The UNT Digital Library
Ximconv User`s Guide Version 1.0.1 (open access)

Ximconv User`s Guide Version 1.0.1

This user`s guide is the documentation for ximconv: a motif interface to the Image Tools developed by the San Diego Supercomputer Center (SDSC). The ximconv utility offers the user a point and click interface for converting from one file format to another.
Date: June 1, 1992
Creator: McClurg, F. R.
Object Type: Report
System: The UNT Digital Library
Ximconv User's Guide Version 1. 0. 1 (open access)

Ximconv User's Guide Version 1. 0. 1

This user's guide is the documentation for ximconv: a motif interface to the Image Tools developed by the San Diego Supercomputer Center (SDSC). The ximconv utility offers the user a point and click interface for converting from one file format to another.
Date: June 1, 1992
Creator: McClurg, F.R.
Object Type: Report
System: The UNT Digital Library
XUV postionization of fragments of photodissociated C{sub 60} (open access)

XUV postionization of fragments of photodissociated C{sub 60}

We report experimental evidence for the loss of neutral C, C{sub 2}, C{sub 3}, and C{sub 4} from photoexcited C{sub 60} and C{sub 70}. These species are detected by postionization with XUV radiation formed by four-wave mixing in Kr vapor. The fragments have been detected in the nascent distribution (i.e., before total disintegration of the fullerene-size molecular entities). A resonant autoionization transition in C atom has yielded an upper limit to the translational energy release for dissociation into C atoms. The detection of these products gives new insight into the fragmentation mechanism of fullerenes.
Date: June 1, 1995
Creator: Lykke, Keith R.
Object Type: Article
System: The UNT Digital Library
Y-12 defense programs: Nuclear Packaging Systems testing capabilities (open access)

Y-12 defense programs: Nuclear Packaging Systems testing capabilities

The Nuclear Packaging Systems (NPS) Department can manage/accomplish any packaging task. The NPS organization is responsible for managing the design, testing, certification, procurement, operation, refurbishment, maintenance, and disposal of packaging used to transport radioactive materials, other hazardous materials, and general cargoes on public roads and within the Oak Ridge Y-12 Plant. Additionally, the NPS Department has developed a Quality Assurance plan for all packaging, design and procurement of nonweapon shipping containers for radioactive materials, and design and procurement of performance-oriented packaging for hazardous materials. Further, the NPS Department is responsible for preparation and submittal of Safety Analysis Reports for Packaging (SARP). The NPS Department coordinates shipping container procurement and safety certification activities that have lead-times of up to two years. A Packaging Testing Capabilities Table at the Oak Ridge complex is included as a table.
Date: June 1, 1995
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Year 2000 Computer Problem: Selected Internet Addresses (open access)

Year 2000 Computer Problem: Selected Internet Addresses

The Year 2000 computer problem, also called "Y2K" or the "millennium bug," describes a situation created over the last 30 years in the computer industry. Generally speaking, it means that some computers will not recognize the year 2000 as a valid date. This report is an annotated list of government (local, state, federal, and international), industry, small business, media, and grass-roots Internet sites which address various aspects of the Year 2000 computer problem.
Date: June 18, 1999
Creator: Tehan, Rita
Object Type: Report
System: The UNT Digital Library
Year 2000 Computing Challenge: Concerns About Compliance Information on Biomedical Equipment (open access)

Year 2000 Computing Challenge: Concerns About Compliance Information on Biomedical Equipment

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the year 2000 compliance status of biomedical equipment, focusing on: (1) the status of the Food and Drug Administration's (FDA) Federal Year 2000 Biomedical Equipment Clearinghouse; (2) compliance status information on manufacturers' web sites referred to in FDA's clearinghouse; (3) FDA's efforts to address GAO's recommendation to obtain and review the test results supporting manufacturers' compliance certifications for critical care/life support medical devices; and (4) information on the biomedical equipment compliance status of health care providers."
Date: June 10, 1999
Creator: United States. General Accounting Office.
Object Type: Text
System: The UNT Digital Library
Year 2000 Computing Challenge: Delivery of Key Benefits Hinges on States' Achieving Compliance (open access)

Year 2000 Computing Challenge: Delivery of Key Benefits Hinges on States' Achieving Compliance

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the year 2000 challenge facing state and local governments, focusing on: (1) the reported year 2000 readiness of state and local governments and actions taken by the President's Council on Year 2000 Conversion in this area; (2) the readiness and federal activities associated with state-administered federal programs; and (3) GAO's observations on H.R. 1599, the Year 2000 Compliance Assistance Act."
Date: June 23, 1999
Creator: United States. General Accounting Office.
Object Type: Text
System: The UNT Digital Library
Year 2000 Computing Challenge: Estimated Costs, Planned Uses of Emergency Funding, and Future Implications (open access)

Year 2000 Computing Challenge: Estimated Costs, Planned Uses of Emergency Funding, and Future Implications

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the costs associated with the year 2000 problem, focusing on: (1) estimated year 2000 costs and agency processes to track costs to date; (2) planned uses of emergency funding; (3) year 2000 costs for fiscal year (FY) 2000 and beyond; (4) agency program and information technology (IT) initiatives delayed by year 2000 activities; and (5) lessons learned from year 2000 efforts that can be applied to other IT activities."
Date: June 22, 1999
Creator: United States. General Accounting Office.
Object Type: Text
System: The UNT Digital Library
Year 2000 Computing Crisis: Actions Needed to Ensure Continued Delivery of Veterans Benefits and Health Care Services (open access)

Year 2000 Computing Crisis: Actions Needed to Ensure Continued Delivery of Veterans Benefits and Health Care Services

Correspondence issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO provided information on its recommendations to the Department of Veterans Affairs (VA) for completing key actions necessary to ensure continued delivery of benefits and health care services to veterans beyond January 1, 2000."
Date: June 11, 1999
Creator: United States. General Accounting Office.
Object Type: Text
System: The UNT Digital Library
Year 2000 Computing Crisis: Customs Is Making Good Progress (open access)

Year 2000 Computing Crisis: Customs Is Making Good Progress

Testimony issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO discussed the Customs Service's progress in addressing the year 2000 computing problem."
Date: June 29, 1999
Creator: United States. General Accounting Office.
Object Type: Text
System: The UNT Digital Library
Year Four, 104th Congress, 3rd quarter report, January 1, 1995--March 31, 1995. DOE/KEURP Site Operator Program (open access)

Year Four, 104th Congress, 3rd quarter report, January 1, 1995--March 31, 1995. DOE/KEURP Site Operator Program

Kansas State University is participating in the Department of Energy`s Electric Vehicle Site Operator Program. Kansas State is displaying, testing, and evaluating electric or hybrid vehicle technology. This participation will provide organizations an opportunity to examine the latest EHV prototypes under actual operating conditions.
Date: June 1995
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Yucca Mountain Milestone (open access)

Yucca Mountain Milestone

The Department of Energy project to determine if the Yucca Mountain site in Nevada is suitable for geologic disposal of high-level nuclear waste reached a major milestone in late April when a 25-foot-diameter tunnel boring machine ``holed through'' completing a five-mile-long, horseshoe-shaped excavation through the mountain. When the cutting-head of the giant machine broke through to daylight at the tunnel's south portal, it ended a 2 1/2-year excavation through the mountain that was completed ahead of schedule and with an outstanding safety record. Video of the event was transmitted live by satellite to Washington, DC, where it was watched by Secretary of Energy Frederico Pena and other high-level DOE officials, signifying the importance of the project's mission to find a repository for high-level nuclear waste and spent nuclear fuel produced by nuclear power plants. This critical undertaking is being performed by DOE's Office of Civilian Radioactive Waste Management (OCRWM). The tunnel is the major feature of the Exploratory Studies Facility (ESF), which serves as an underground laboratory for engineers and scientists to help determine if Yucca Mountain is suitable to serve as a repository for the safe disposal of high-level nuclear waste. Morrison Knudsen's Environmental/Government Group is providing design and …
Date: June 9, 1997
Creator: Hunt, Rod
Object Type: Report
System: The UNT Digital Library
The Yucca Mountain Project drift scale test (open access)

The Yucca Mountain Project drift scale test

The Yucca Mountain Project is currently evaluating the coupled thermal-mechanical-hydrological-chemical (TMHC) response of the potential repository host rock through an in situ thermal testing program. A drift scale test (DST) was constructed during 1997 and heaters were turned on in December 1997. The DST includes nine canister-sized containers with thirty operating heaters each located within the heated drift (HD) and fifty wing heaters located in boreholes in both ribs with a total power output of nominally 210kW. A total of 147 boreholes (combined length of 3.3 km) houses most of the over 3700 TMHC sensors connected with 201 km of cabling to a central data acquisition system. The DST is located in the Exploratory Studies Facility in a 5-m diameter drift approximately 50 m in length. Heating will last up to four years and cooling will last another four years. The rock mass surrounding the DST will experience a harsh thermal environment with rock surface temperatures expected to reach a maximum of about 200 C. This paper describes the process of designing the DST. The first 38 m of the 50-m long Heated Drift (HD) is dedicated to collection of data that will lead to a better understanding of the …
Date: June 1, 1998
Creator: Finley, R.E.; Blair, S.C. & Boyle, W.J.
Object Type: Article
System: The UNT Digital Library
Yucca Mountain Site Characterization Project bibliography, 1992--1994. Supplement 4 (open access)

Yucca Mountain Site Characterization Project bibliography, 1992--1994. Supplement 4

Following a reorganization of the Office of Civilian Radioactive Waste Management in 1990, the Yucca Mountain Project was renamed Yucca Mountain Site Characterization Project. The title of this bibliography was also changed to Yucca Mountain Site Characterization Project Bibliography. Prior to August 5, 1988, this project was called the Nevada Nuclear Waste Storage Investigations. This bibliography contains information on this ongoing project that was added to the Department of Energy`s Energy Science and Technology Database from January 1, 1992, through December 31, 1993. The bibliography is categorized by principal project participating organization. Participant-sponsored subcontractor reports, papers, and articles are included in the sponsoring organization`s list. Another section contains information about publications on the Energy Science and Technology Database that were not sponsored by the project but have some relevance to it. Earlier information on this project can be found in the first bibliography DOE/TIC-3406, which covers 1977--1985, and its three supplements DOE/OSTI-3406(Suppl.1), DOE/OSTI-3406(Suppl.2), and DOE/OSTI-3406(Suppl.3), which cover information obtained during 1986--1987, 1988--1989, and 1990--1991, respectively. All entries in the bibliographies are searchable online on the NNW database file. This file can be accessed through the Integrated Technical Information System (ITIS) of the US Department of Energy (DOE).
Date: June 1, 1992
Creator: unknown
Object Type: Report
System: The UNT Digital Library
YUCCA MOUNTAIN SITE CHARACTERIZATION PROJECT EAST-WEST DRIFT SYSTEM SAFETY ANALYSIS (open access)

YUCCA MOUNTAIN SITE CHARACTERIZATION PROJECT EAST-WEST DRIFT SYSTEM SAFETY ANALYSIS

The purpose of this analysis is to systematically identify and evaluate hazards related to the design of the Yucca Mountain Project Exploratory Studies Facility (ESF) East-West Cross Drift. This analysis builds upon prior ESF System Safety Analyses and incorporates TS Main Drift scenarios, where applicable, into the East-West Drift scenarios. This System Safety Analysis (SSA) focuses on the personnel safety and health hazards associated with the engineered design of the East-West Drift. The analysis also evaluates other aspects of the East-West Drift, including purchased equipment (e.g., scientific mapping platform) or Systems/Structures/Components (SSCs) and out-of-tolerance conditions. In addition to recommending design mitigation features, the analysis identifies the potential need for procedures, training, or Job Safety Analyses (JSAs). The inclusion of this information in the SSA is intended to assist the organization(s) (e.g., constructor, Safety and Health, design) responsible for these aspects of the East-West Drift in evaluating personnel hazards and augment the information developed by these organizations. The SSA is an integral part of the systems engineering process, whereby safety is considered during planning, design, testing, and construction. A largely qualitative approach is used which incorporates operating experiences and recommendations from vendors, the constructor and the operating contractor. The risk assessment …
Date: June 8, 1999
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Yucca Mountain Site Characterization Project Technical Data Catalog (quarterly supplement) (open access)

Yucca Mountain Site Characterization Project Technical Data Catalog (quarterly supplement)

The June 1, 1985, Department of Energy (DOE)/Nuclear Regulatory Commission (NRC) Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where it may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed in accordance with the requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and published in the month following the end of each quarter. A complete revision to the Catalog is published at the end of each fiscal year. Supplements to the end-of-year edition are published each quarter. These supplements provide information related to new data items not included in previous quarterly updates and data items affected by changes to previously published reference information. The …
Date: June 30, 1993
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Yucca Mountain Site Characterization Project Technical Data Catalog; Yucca Mountain Site Characterization Project (open access)

Yucca Mountain Site Characterization Project Technical Data Catalog; Yucca Mountain Site Characterization Project

The June 1, 1985 DOE/NRC Site-Specific Procedural Agreement for Geologic Repository Site Investigation and Characterization Program requires the DOE to develop and maintain a catalog of data which will be updated and provided to the NRC at least quarterly. This catalog is to include a description of the data; the time (date), place, and method of acquisition; and where it may be examined. The Yucca Mountain Site Characterization Project (YMP) Technical Data Catalog is published and distributed in accordance with the requirements of the Site-Specific Agreement. The YMP Technical Data Catalog is a report based on reference information contained in the YMP Automated Technical Data Tracking System (ATDT). The reference information is provided by Participants for data acquired or developed in support of the YMP. The Technical Data Catalog is updated quarterly and published in the month following the end of each quarter. This edition of the Technical Data Catalog supersedes the edition dated March 31, 1992.
Date: June 30, 1992
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Z-Area Saltstone Disposal Facility groundwater monitoring report. First quarter 1995 (open access)

Z-Area Saltstone Disposal Facility groundwater monitoring report. First quarter 1995

The three monitoring wells at the Z-Area Saltstone Disposal Facility, ZBG 1, 1A, and 2, are sampled quarterly as part of the Savannah River Site Groundwater Monitoring Program and to comply with conditions of the facility`s Industrial Waste Permit IWP-217, issued by the South Carolina Department of Health and Environmental Control (SCDHEC). During first quarter 1995, samples from wells ZBG 1 and 2 were analyzed for selected inorganic constituents, volatile organic compounds, selected radionuclides, and other constituents. Well ZBG 1A was dry and could not be sampled. None of the wells contained constituents above SCDHEC proposed groundwater monitoring standards, final Primary Drinking Water Standards, or flagging criteria. In previous quarters, wells ZBG 1 and 2 contained slightly elevated levels of tritium, similar to the tritium levels detected before Z Area began radioactive operations.
Date: June 1, 1995
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Z-Pinch Generated X-Rays Demonstrate Indirect-Drive ICF Potential (open access)

Z-Pinch Generated X-Rays Demonstrate Indirect-Drive ICF Potential

Hohlraums (measuring 6-mm in diameter by 7-mm in height) have been heated by x-rays from a z-pinch. Over measured x-ray input powers P of 0.7 to 13 TW, the hohlraum radiation temperature T increases from {approximately}55 to {approximately}130 eV, and is in agreement with the Planckian relation P-T{sup 4}. The results suggest that indirect-drive ICF studies involving NIF relevant pulse shapes and &lt;2-mm diameter capsules can he studied using this arrangement.
Date: June 16, 1999
Creator: Bowers, R. L.; Chandler, G. A.; Derzon, M. S.; Hebron, D. E.; Leeper, R. J.; Matzen, M. K. et al.
Object Type: Article
System: The UNT Digital Library
Zeolite Membranes for Gas Separations (open access)

Zeolite Membranes for Gas Separations

Silicalite-1, a pure silica zeolite, was deposited on a tubular, asymmetric, {gamma}-alumina support. Single gas permeation experiments with N{sub 2}, CH{sub 4}, and CO{sub 2} were carried out on the membrane. Separation experiments for N{sub 2}/CH{sub 4} mixtures were also conducted. Single-gas permeation of H{sub 2} and separation of H{sub 2}/SF{sub 6} mixture were also carried out with the membrane. Composite membranes of silicalite and Ni-SAPO-34 were also fabricated, but no CO{sub 2}/H{sub 2} selectivity was found. It is proposed to use these membranes for methanol synthesis and separation, and for separating H{sub 2} from gasification products for use as fuel cell fuel, etc.
Date: June 1, 1995
Creator: Falconer, J. & Noble, R.
Object Type: Article
System: The UNT Digital Library
D-Zero End Cap Calorimeter Inner Vessel Heater Documentation (open access)

D-Zero End Cap Calorimeter Inner Vessel Heater Documentation

There will be 48 finned strip heaters installed in each end cap calorimeter vessel. The strip heaters were specified and the lowest bid vendor submitted a sample heater which was tested. This engineering note will document specifications of the heater, test procedure used, and results of the test. The finned strip heaters were of stainless steel construction. The lowest bid was $45.00 per heater from TEMPCO Electric Heater Corporation. A sample heater from TEMPCO was inspected, cold shocked tested to -320 F, and found to be acceptable.
Date: June 15, 1990
Creator: Rucinski, R.
Object Type: Report
System: The UNT Digital Library