An analysis of a target factory leading to the determination of production expressions has provided for the basis of a parametric study. Parameters involving the input and output rate of a process system, processing yield factors, and multiple processing steps and production lines have been used to develop an understanding of their dependence on the rate of target injection for laser fusion. Preliminary results have indicated that a parametric study of this type will be important in the selection of processing methods to be used in the final production scheme of a target factory.

Heavy atoms and ions offer an interesting opportunity to study atomic physics in a region where the atomic structure is dominated by the interelectronic interactions. One illustration of this is the profound term dependence of atomic orbitals for certain configurations of heavy atoms and ions. The appearance of giant scattering resonances in the cross sections for ionization of heavy atoms by electron impact is a manifestation of resonance behavior. Such resonant structures arise from the double well nature of the scattering potential and have recently been identified in the cross sections for the electron impact ionization of several xenon-like ions. The results of calculations showing effects for a variety of other ions are summarized. 7 refs., 4 figs.

As soon as two SLC beams make it to the intersection region, both transverse offsets, spot sizes and shapes can be extracted from the pattern of angular deflections produced by the electromagnetic interaction of the two beams, as one is scanned across the other. These deflections, measured in two high resolution Beam Position Monitors (BPM) mounted symmetrically on both sides of the intersection point, will produce detectable signals allowing spot sizes to be tuned, even with the very low luminosities expected at turn on. They will also furnish a good signal to monitor beam centering and will therefore become an important part of the FFS feedback system. This note summarizes the formulae which will allow us to correlate BPM offset readings with the properties of the two beams, and describes the range and limitations of the technique in the case of SLC.

It has been suggested (ref.1) that high energy linear colliders might operate with non-round beam profiles, i.e. with different sigma/sub x/ and sigma/sub y/, described by an aspect ratio R = sigma/sub y/sigma/sub x/. The advantage of flat beams is the expectation, that ''beamstrahlung'', i.e., beam-beam synchrotron radiation is reduced with increasing R. The reason for this reduction comes from the fact that for constant bunch area and therefore constant luminosity the mean physical distance between the particles increases with R. When the physical distances are larger, the electromagnetic fields and therefore particle acceleration and radiation decrease. This would be of particular importance for very large linear colliders (VLC), where beamstrahlung may consume an appreciable fraction of the incident energy. The underlying assumption is that the emittance quality can be preserved in the deformed bunch. 4 refs., 3 figs., 3 tabs.

We are reporting EPR results obtained with uranium powder samples fully oxidized in dry air, water vapor, and air/water vapor mixtures. The results reported previously are confirmed and additional paramagnetic centers, associated with chemisorbed species, have been identified. The temperature dependence of the g-value for these centers from room temperature to 10K is also reported.

Conceptual design studies have been carried out on an integrated fusion/chemical plant system using a Tandem Mirror Reactor fusion energy source to drive the General Atomic Sulfur-Iodine Water-Splitting Cycle and produce hydrogen as a future feedstock for synthetic fuels. Blanket design studies for the Tandem Mirror Reactor show that several design alternatives are available for providing heat at sufficiently high temperatures to drive the General Atomic Cycle. The concept of a Joule-boosted decomposer is introduced in one of the systems investigated to provide heat electrically for the highest temperature step in the cycle (the SO/sub 3/ decomposition step), and thus lower blanket design requirements and costs. Flowsheeting and conceptual process designs have been developed for a complete fusion-driven hydrogen plant, and the information has been used to develop a plot plan for the plant and to estimate hydrogen production costs. Both public and private utility financing approaches have been used to obtain hydrogen production costs of $12-14/GJ based on July 1980 dollars.

Predictions are presented of total cross sections for charm and bottom quark production in /bar p/p, ..pi../sup /minus//p, and pp interactions at fixed target and collider energies. The calculations are done through next-to-leading order in QCD perturbation theory. The sensitivity is explored of results to the choices of renormalization/evolution scale, parton densities, ..lambda../sub QCD/, and heavy flavor masses. Comparisons with available data show that good agreement is obtained for reasonable values of charm and bottom quark masses and other parameters. Open issues in the interpretation of results are summarized including the large size of the next-to-leading order contributions, proper definition of the gluon density, the nuclear A dependence of charm cross sections, the role of final state interactions, and higher twist effects. 39 refs., 7 figs., 5 tabs.

Construction of an Anger camera-computer system which allows collection of both the position and energy signals from events detected by the scintillation camera has been completed. The system allows correction of energy response non-uniformity of the detector and facilitates research related to effects of energy discrimination in radionuclide scintigraphy. The system consists of electronic hardware to transmit and digitize the energy signal, software to record and process that signal in conjunction with spatial positioning signals, and additional hardware for recording the processed images so that they can be evaluated by observers. Preliminary results indicate that the system is useful in evaluating clinical images. Assymetric (eccentric) energy windows do improve image quality and are of value in improving detection of lesions on liver scintigraphs. The mechanisms by which Ga-67 is taken up in infection and tumor has been elucidated, and the uptake of radiogallium in microorganisms as a function of its interaction with siderophores was also studied. The primary function of these low molecular weight compounds is to trap ferric ion. However, gallium may be substituted for ferric ion and becomes trapped within the microorganism. The uptake of radiogallium by neutrophils and the role that lactoferrin plays in both intracellular localization …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Letter opinion issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Whether officers, employees, or paid consultants of an organization known as TAPA are subject to the prohibitions in this section of the Public Accountancy Act.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification; Whether a city official may participate in Federal Urban Development Action Grant in private capacity as merchant

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification; Disposition of fines paid following trial de novo in county courts on appeal from municipal courts

Beam cooling methods developed for the accumulation of antiprotons are being employed to assist in the performance of experiments in Nuclear and Particle Physics with ion beams stored in storage rings. The physics of beam cooling, and the ranges of utility of stochastic and electron cooling are discussed in this paper.

The Hoosac Rail Tunnel has been analyzed as a central element in a district heating system for the City of North Adams. The tunnel has been viewed as a collector of the earth's geothermal heat and a seasonal heat storage facility with heat piped to the tunnel in summer from existing facilities at a distance. Heated fluid would be transported in winter from the tunnel to users who would boost the temperature with individual heat pumps. It was concluded the tunnel is a poor source of geothermal heat. The maximum extractable energy is only 2200 million BTU (20000 gallons of oil) at 58/sup 0/F. The tunnel is a poor heat storage facility. The rock conductivity is so high that 75% of the heat injected would escape into the mountain before it could be recaptured for use. A low temperature system, with individual heat pumps for temperature boost could be economically attractive if a low cost fuel (byproduct, solid waste, cogeneration) or a cost effective seasonal heat storage were available.

The electronic integration hangar, designated LP-167, was selected for study, as it was a single-story building with a large floor area. Because of the high ceiling and the sliding doors necessary to admit aircraft, the heat loss rate, based on floor area, was about twice that of commercial buildings. It was furnished with an oil-fired hot water heating system capable of high thermal output to meet heating requirements in the coldest weather. On the basis of the known characteristics of geothermal sources for the Atlantic Coastal Plain, and wells drilled and assayed in the Norfolk area, a reasonable estimate of the parameters of a well drilled at NARF was made. This included a low temperature output from the well of only 107/sup 0/F, so that direct transfer of warm water between the wellhead heat exchanger (HX) and the hot water radiating system in the building was not practical. Four design options are explored and calculations are presented on each one.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Success of the thermal shield system was demonstrated by the results of acceptance tests performed with the magnet and all its ancillary equipment. During these tests the thermal shield system was: (1) thermally cycled several times from 300/sup 0/K to 77/sup 0/K; (2) pressure cycled several times from 0 to 5 atmospheres; (3) operated for more than 500 hours at 77/sup 0/K and in a vacuum environment of less than 10/sup -5/ torr; (4) operated in a magnetic field up to 6.0 Telsa; (5) exposed to a rapidly collapsing magnetic field of more than 250 gauss per second; (6) drained of all LN/sub 2/ in a few minutes, without any weld failures. The successful (and relatively problem free) operation of the magnet system validates the choice of the welding processes used, as well as their execution in both shop and field environments.

This is a quarterly report detailing the budget and progress of the Office of Technology Assessment.

This report describes the status of CH foam development with densities of 50 mg/ccs and cell sizes of 1 ..mu..m for the ICF Program. Two approaches that both involve polymer phase separation are being investigated. The first involves a gelation-crystallization of high molecular weight polyethylene from solution, whereas the second approach involves the modification of the phase separation morphology of water-styrene emulsions by molecularly-tailored surfactants followed by polymerization of the continuous styrene phase.

Weekly report of the Texas Agricultural Statistics Service on broiler chick numbers in Texas and compared with other states. It includes compiled statistics across six consecutive weeks, from the week ending May 2 to the week ending June 6, during 1986 and 1987 for broiler eggs set, chicks hatched, and chicks placed.

Weekly newsletter discussing natural resources, parks, hunting and fishing, and other information related to the outdoors in Texas.

The N-Reactor probabilistic risk assessment adaption of the modular logic approach for fault tree modeling has led to the update of the master logic diagram (MLD) nomenclature to conform with a standard modular-logic-model-nomeclature format. This report describes the MLD nomenclature system and provides a listing of the updated MLD label codes, along with the original codes.