Recent developments of transition radiation detectors (TRD's) indicate that an efficient and practical system can be deployed for beam line particle tagging for momenta greater than 200 GeV/c. This note describes the design of a prototype system to be tested at Fermilab in Fall, 1983. Pre-prototype testing was done at BNL in March, 1983 and has been followed up by bench testing of gasses and electronics at Fermilab. The design goal is a modular system which puts few contraints on beam line configuration and hence can be adapted to any high energy secondary beam.

Allowance is made for beta-delayed fission in the calculation of the mass yield of underground thermonuclear explosions. This allowance is made by calculating a correction factor by four different methods. These correction factors are applied to a simple model of product yield and the accuracy and potential usefulness of the results are discussed. 19 refs., 3 figs., 1 tab. (DWL)

This report addresses the breeder reactor fuel fabrication development overview.

This paper presents a containment failure mode analysis during a spectrum of postulated degraded core accident sequences in a typical 1000-MW(e) boiling water reactor (BWR) with a Mark-I wetwell containment. Overtemperature failure of containment electric penetration assemblies (CEPAs) has been found to be the major failure mode during such accidents.

Measurements of soft x-ray production by transition radiation have been performed in a series of experiments at the Lawrence Livermore National Laboratory. The results have shown that transition radiation is an intense and predictable source of photons in the soft x-ray energy range. This paper will give a brief review of the general properties of the x-ray distributions generated by these sources. 9 refs., 9 figs.

Large-scale numerical computations associated with rock mechanics problems have required efficient and economical models for predicting temperature, stress, failure, and deformed structural configuration under various loading conditions. To meet this requirement, the complex dependence of the properties of geological materials on the time and temperature is modified to yield a reduced time scale as a function of time and temperature under the thermorheologically simple material (TSM) postulate. The thermorheologically linear concept is adopted in the finite element formulation by uncoupling thermal and mechanical responses. The thermal responses, based on transient heat conduction or convective-diffusion, are formulated by using the two-point recurrence scheme and the upwinding scheme, respectively. An incremental solution procedure with the implicit time stepping scheme is proposed for the solution of the thermoviscoelastic response. The proposed thermoviscoelastic solution algorithm is based on the uniaxial creep experimental data and the corresponding temperature shift functions, and is intended to minimize computational efforts by allowing large time step size with stable solutions. A thermoelastic fracture formulation is also presented by introducing the degenerate quadratic isoparametric singular element for the thermally-induced line crack problems. The stress intensity factors are computed by use of the displacement method. Efficiency of the presented formulation and …

These notes present a brief survey of some of the current diagnostic techniques used in magnetic fusion plasma devices. To give an idea of the range of parameters and geometries encountered the parameters of four representative experiments - PLT, TMX, ZT-40 and EBT-I(S) - are given. The central issue of all experiments is to understand the flow of power which can be summarized by two volume integrated equations for the ions and electrons.

Previous surveys of experimental level structure in deformed odd-odd nuclei have been updated with recent results for the lanthanide and actinide regions. The relative strengths of the effective neutron-proton interaction derived from these data are compared. The predictive power of a semi-empirical model for level structure in deformed odd-odd nuclei is demonstrated. Comparison is made with recent Hartree-Fock calculations of selected nuclei.

New switching power supplies were designed for the 10 mm laser amplifiers in the Nova Master Oscillator Room. The flashlamp supply must be repratable. Therefore, we designed a constant current, linearly charging power supply. Since it is a capacitor, the load varies throughout the charge cycle. At first the load is great, and di/dt of load current is at a maximum. As the capacitor charges the initial conditions for each cycle change, the power supply in effect sees a smaller capacitance, and di/dt decreases. We need a way of gradually increasing the on-time of the current pulses so that the transistors in the power bridge are turned off when they reach their maximum peak current. The normal current sense response of the control chip is not fast enough to be useful for our application. The deadtime, or the time that all the bridge transistors are turned off, is fixed so that as the pulse width varies so does the period. We end up with a constant peak current, switching power supply whose frequency varies from 50 khz to 20 khz. Finally, an overcurrent latch protects the transistors from bridge or transformer faults. The circuit is described and results are shown.

None

This volume contains appendices of the following: US Geological Survey Arctic operating orders, 1979; Det Noske Vertas', rules for the design, construction and inspection of offshore technology, 1977; Alaska Oil and Gas Association, industry research projects, March 1980; Arctic Petroleum Operator's Association, industry research projects, January 1980; selected additional Arctic offshore bibliography on sea ice, icebreakers, Arctic seafloor conditions, ice-structures, frost heave and structure icing.

None

This manual is intended to serve several purposes. The first goal is to describe the capabilities and operation of the SMC processor package from an operator or user point of view. Secondly, the manual will describe in some detail the basic hardware elements and how they can be used effectively to implement a step motor control system. Practical information on the use, installation and checkout of the hardware set is presented in the following sections along with programming suggestions. Available related system software is described in this manual for reference and as an aid in understanding the system architecture. Section two presents an overview and operations manual of the SMC processor describing its composition and functional capabilities. Section three contains hardware descriptions in some detail for the LLL-designed hardware used in the SMC processor. Basic theory of operation and important features are explained.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether House Bill No. 169, 68th Legislature requires a minor child to have a social security number prior to the issuance of a decree in the child support suit.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether a regional airport board may enter into an agreement with a municipality under article 999b, V.T.C.S.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: Whether article 342-903 V.T.C.S., which broadens the definition of “drive-in/walk-up facility” contravenes the constitutional prohibition against branch banking

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification: May one individual, consistently with article XVI, section 40, of the Texas Constitution, serve as chief appraiser in three different appraisal districts and simultaneously as tax assessor-collector in three school districts and a water control and improvement district

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Jim Mattox, regarding a legal question submitted for clarification; Whether a school district may offset workers' compensation benefits under article 8309h, V.T.C.S., against benefits paid pursuant to section 13.904 of the Texas Education Code (RQ-1226)

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification;Investigative authority of the Comptroller of public accounts.

Document issued by the Office of the Attorney General of Texas in Austin, Texas, providing an interpretation of Texas law. It provides the opinion of the Texas Attorney General, Mark White, regarding a legal question submitted for clarification;Distribution of interest in suspension account.

Newsletter of the Texas Bureau of Disease Control and Epidemiology discussing the news, activities, and events of the organization and other information related to health in Texas.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.