The following document describes the usage and results of sending pulsed beams of electrically charged particles with electrically wide range of pulse lengths and pulse repetition rates.

Breakaway corrosion of Be in moist CO2 can be avoided if the Be is fabricated using preoxidized powder. The powder is preoxidized by heating in dry O/sub 2/. Preoxidation of Be powder was measured as a function of temperature and time of heating in O/sub 2/. The subsequent reactions of the preoxidized powder in moist CO/sub 2/ at 700 deg C were studied and the effect of increasing amounts of added oxide was measured. A model is proposed to explain the inhibition of corrosion by added oxide. (auth)

This report supersedes ORNL CF-57-2-1, which was an extension and revision of ORNL CF-54-6-72. Details concerning a recommended system of flow-plan symbols and drawing are given. The system is designed to identify the function of all major instrument components and to show schematically the operation of the instrument relative to the particular process. The system is used for identification and designation. The system is a modification of the Instrument Society of American Recommended Practice (RP 5.1).

This report describes the work carried out in 321 Building semiworks equipment, to define the factors contributing to high corrosion-product contamination and presents recommendations for reducing the impurity level to meet current specifications (maximum of 200 parts total metals per million parts U).

The development of swaging and vibratory compaction process for fabrication of clad UO2 fuel rods is described. The cost is less than 50% of that for an equivalent core fabricated from pellets. The irradiation testing of vibratory filled and swaged UO2 rods is reported for burn-ups from 2,000 to 12,000 Mwd/t UO2; the results indicate that the rods are capable of excellent performance power reactors.

"The quantum theory problem of constructing explicitly a local Lorentz invariant model field theory which has an asymptotic particle interpretation and gives rise to an S matrix different from unity is discussed. It is proved that if a local covariant field H(x) has a complete current, the S matrix associated with this field is identically equal to unity. Results show that in order to get an interaction, the current is not allowed to have a terminating expansion in terms of a free field. The absence of a finite connection between a free field and an interacting field tended to confirm the belief that in local quantum field theories with particle interpretation the requirement of the existence of scattering forces in the physical states are such that it is not pos sible to identify them with a linear space spanned by ""free'' particle states."

The statistical behavior of measured track quantities, gap density, gap length coefficient, and lacunarity is studied. The transformations which give the expectation values of track quantities on inclined tracks are then found.

"Mixed Fission Products (MFP) for use as a heat source for thermoelectric generators will become increasingly available in the coming years. The Atomic Energy Commission sponsored program on solidification of nuclear wastes is now entering the hot-bench scale test phase. During this phase approximately 5000 thermal watts of two year old MFP could be produced monthly. Two different types of hot calcination pilot plants are planned for installation at the Hanford National Laboratories in the 1964 to 1966 time period. Each of these plants should be able to produce 160,000 thermal watts of two year MFP and 16,000 thermal watts of ten year MFP on a monthly basis. A full scale plant for a 15,000 Mw(e) nuclear economy is estimated to produce four to five times as much MFP as either of the pilot plants. Costs will be dependent upon AEC policy in effect at the time the plant is operating."

A process was developed in which stainless steel-clad UO2 fuel rods are fabricated by high-temperature coextrusion. The process has a potential of being a more economical method for the preparation of stainless steel-clad UO2 fuel rods than the conventional pellet process. Consequently, it was considered advantageous to evaluate the irradiation characteristics of fuel rods fabricated in this manner. Therefore, 24 coextruded fuel rods were manufactured for evaluation in a reactor. The required amounts of UO2 and clad were soaked in separate containers at 1875 and 760 degree C, respectively. The containers were removed from their respective furnaces and were coextruded in one pass. A force of 450 to 475 tons was used, and a reduction ratio of 18 to 1 was obtained. The coextruded rods were cut to the approximate length, and the ends were sealed with an acid-resistant tape. The carbon steel can covering the stainless steel clad was removed by immersion in 1:1 nitric acid for 20 minutes. The rods were visually inspected, the specified lengths of clad and fuel were obtained by machining, and the correct diameter was obtained by belt sanding. The fabrication of the fuel rods was completed by inserting the plenum support tubes and …

Under the stimulus of electronic materials development - particularly thin-film studies - and the need for space environmental simulation chambers, a very rapid increase in the availability of industrial-sized vacuum components and systems operable in the ultrahigh vacuum range has taken place in the last three years. It is the purpose of this paper to explore the design considerations of ultrahigh vacuum systems for metallurgical applications.

This report details a study of the vapor pressures of deuteroethylenes and C13 ethylene.

Concentric tubular reactor fuel element geometries to give equal coolant outlet temperatures are presented. Oscillations from tube to tube in thickness and temperatures generally occur but it is possible to eliminate them by choice of the centre element. This may be a fuel rod or a non-heat—producing rod with or without a surrounding annulus of fuel. The geometries and temperatures are dependent on the voidage and on a non-dimensional parameter equivalent to a Biot number based on the channel equivalent diameter.

In answer to the question, "How well do we know the composition of the fuel material for the PRTR start-up tests?", the analytical data on the PRTR fuel elements and other fuel elements which were fabricated by similar processes was gathered and analyzed. The results of this analysis are presented.

First paragraph of report: M. Neumann and H. Sherrard reported the development of a wire spark chamber experiment toward receiving digitized spark information. Since late 1962 our effort has been directed toward a wire-chamber with a core memory, using standard ferrite cores, and toward an on-line operation between spark chamber and computer.

Abstract; SM-1 Reactor Core I Rearranged and Spiked, and Core II with Special Components were analyzed under various off-design conditions to induce nucleate boiling. The steady state code, STDY-3, written for the thermal analysis of pressurized water cores, was employed for the analysis. The code performs a complete steady state parallel channel thermal analysis for both nominal and hot channels. Thermal characteristics of individual elements were investigated while changing the parameters of primary pressure or inlet temperature to introduce the phenomenon of nucleate boiling in the the core. Reduction of system pressures to 1000, 800, and 600 psia and increasing core inlet temperatures to 465 and 500 degree F were studied as the means to induce boiling in the core. This analysis indicates that SM-1 Core I Rearranged and Spiked can be safely operated at the reduced pressure of 910 psia without introducing extensive boiling in the core. SM-1 Core II with Special Components can be operated at 800 psia or at an inlet temperature of 500 degree F at 1200 psia.

The wrist badge provides a dosimeter that is useful in estimating the radiation dose to the hands and forearms. Its new shield system gives good gamma and slow neutron dose discrimination with duPont 552 film packets. The film can be evaluated using the present technique and equipment. Several attempts to develop hand dosimeters have been made. Finger rings using film have been used routinely but have not been entirely satisfactory for all situations. The wrist badge was developed to provide improved gamma and slow neutron dose measurement of the upper extremities under certain appropriate conditions. The wrist badge dosimeter is not a substitute or alternate for finger ring dosimeters but is a necessary dosimeter for some extremity exposure situations.

The diffusion length of thermal neutrons in beryllium oxide of effective density 2.86 g cm-3 has been measured as 29.9 +- 0.8 cm. Using published experimental values for the diffusion constant of beryllium oxide, a value of [sigma] a = 9.0 +- 0.5 mb is deduced for the effective 2200m/s microscopic absorption cross-section.

Technical report. From Introduction : "The nuclear volume dependent isotope shift of optical spectral lines has long been a very useful means for studying the changes in the nuclear size or shape for different isotopes of heavy elements."

Test work was completed on development of a stripping method for the amine extraction (Amex) process which produces a concentrated uranyl nitrate solution for shipment to the refinery. This procedure offers potential cost savings by simplifying the overall mill-refinery flowsheet. The process involves treatment of the amine extract with calcium nitrate solution to convert the uranium in the solvent to a nitrate complex, stripping the uranium with water or dilute nitric acid, and recovery of nitrate from the solvent for recycle by contact with a lime slurry.

Abstract: "Microwaves have been used for several years at Lawrence Radiation Laboratory to study conditions in the magnetically contained plasmas of controlled fusion research. There are two basic microwave techniques. One gives information on electron density and distribution in the plasma, the other provides data on electron temperature. This paper briefly summarizes the established techniques, discusses engineering requirements and limitations, and describes some further applications of microwaves presently being considered."

This technical report introduces "some approximations into the basic quantum mechanical theory" so that the theory of the covalent bond and the molecular orbital method "can be combined into one which will yield quantitative rather than qualitative binding energies and cohesive energies and also distinct energy levels and band structure." This approach will provide a common method "suitable to both solid state physicists and physical chemists, for calculating the energy levels in metals and complex molecules." This report also contains figures detailing the findings. (Quotations taken from introduction)

From abstract: "The preparation of pure molybdenum(IV) bromide was accomplished conveniently by the reaction between molybdenum(III) bromide and liquid bromine at ca. 55°. Molybdenum(IV) bromide was found to be soluble in liquid bromine, and this property was utilized to separate and purify the molybdenum(IV) bromide. The solution of MoBr4 in bromine was a poor electrical conductor. No evidence was found for the formation of MoBr4 from MoBr3 and bromine vapor at 2-4 atm. and temperatures from 180 to 400°. However, MoBr4 was completely decomposed at 110-130°, in vacuo, with formation of MoBr3 and bromine."

The most important component required for the Astron experimental facility is a high energy, high current, pulsed electron accelerator. A thin cylindrical layer of high energy electrons trapped within an axially symmetric magnetic field is the key feature of the Astron thermonuclear device. The trapping magnetic field is constant in time. Therefore, it is not possible to inject electrons and trap the electrons in this field unless during the injection phase a part of the electron energy is absorbed by some friction process. This is accomplished by means of eddy currents generated on suitable passive circuits by the current of the injected electron bunch. This method has ben described elsewhere. However, in order to achieve an effective loss mechanism the current of the injected electron beam must be over one hundred amps. Such high current beams are difficult to handle except if the electron energy is high enough so that the electrostatic repulsive force is compensated to great extent by attractive magnetive forces. Hence the electron energy required is 5 Mev or higher. Other requirements on the electron layer yield the same result.

A series of exponential experiments were performed using Consolidated Edison Thorium Reactor oxide type fuel pins in a light water lattice. These experiments were performed in a new facility where measurements were made at temperatures up to 468 F. In addition, boric acid was added to the system in various concentrations. The main objective of these experiments was to obtain the change in material buckling for the system as operating conditions were changed from ambient temperature to high temperature.