Binary alloys of uranium with 38 elements in the range 0.01 to 1.0 at.% were made. Three alloys having nominal compositions of 0.01, 0.1, and 1.0 at.% were made with most of the elements, and in addition, 12 ternary and quaternary alloys were made. The alloys were cast, rolled to 7/8-inch-diameter bars, heat treated, and examined for grain size.

From introduction: "The work covered in this report is a portion of the experimental research undertaken for the design of a uranium-containing metallic fuel rod for operation in air at 1090 C...This report deals with that phase which involved the testing and evaluation of various metals as barrier costs between uranium alloys, and low-carbon steel. The work is of a preliminary nature and is concerned more with a comparison of the various barrier metals than with the acquisition of numerical data, e.g., diffusion coefficients."

From abstract: "Results are presented of Scheibel column extraction tests with neutral ether on a variety of combinations of feed solutions...The effect of added iron was evaluated for a considerable number of process solutions and slurries. Arsenic was traced through both primary and secondary extraction stages in one test."

Technical report presenting a consideration of the characteristics of fused salt-ThF4 solutions suitable for use in homogeneous reactors. Presented in tandem with a brief survey of the literature pertaining to such solutions and a summary of the experimental work accomplished. [From Abstract]

Report evaluating different methods of preparing nitric acid solution and different methods of separating plutonium from this nitric acid solution of slag and crucible. Methods are explained and experimental data is given.

Report discussing a study regarding iodine removal from dissolver solutions. Removal was traced by gamma activity in an iodine isotope which was added to the dissolver.

Report presenting a study for determining a way to remove iodine from dissolver solutions through sparging. DIssolver solutions were spiked with an iodine isotope that was used to track iodine removal through gamma activity.

Report discussing a study of various types of mercuric salts in order to determine which salt prevents the evolution of iodine which results from sparging.

Report discussing changes in parameters regarding Sutton's diffusion hypothesis, which is used in calculations of plant stacks' atmospheric pollutant distribution. An explanation of the computation and results are given.

The following report covers a test with the objective to demonstrate that the plutonium and uranium losses associated with the aluminum jacket dissolution could be reduced by substituting a water wash for the 5 per cent nitric acid wash following the coating removal and that this change would not adversely effect the product yield of decontamination in subsequent process steps.

Introduction: "A number of determination have been made of the half life of polonium-210 by calorimetry. Counting affords an entirely different method of determining half lives and requires only a small amount of activity. Therefore for comparison a half-life determination by counting was undertaken with a sample of approximately 0.5 millicurie of polonium."

The following report provides data that was discovered from a preliminary literature survey that was made to define the utility of the newer refractory ceramics or ceramic-based materials.

The following report provides information conducted with the purpose of ascertaining the effect of oxygen on activated charcoal at approximately one atmosphere by measuring the amount of CO2 formed over a known length of time.

Report discussing thermodynamic measurements and calculations made regarding couples of neptunium ions in perchloric acid.

The following report follows a study that deals with the development of a technique for the determination of microquantities of uranium in matter.

An outline is given for mismatch and delay measurements methods on air dielectric transmission line components, and techniques for square wave testing are outlined. Equipment design of the needed pulsers, attenuation and delay sections, and high speed oscilloscopes is disclosed. The final section of this report is devoted to measurements and how to analyze results

Secondary charge effects from a 10 kilovolt proton beam and their effect upon beam current measurement are investigated. A collector is designed for beam current metering of a 60 kilovolt proton beam by means of charge measurement and energy measurement.

The proper roof thickness to correspond with a given side wall thickness has been estimated fro experience with the 184 feet cyclotron, which has indicated that a roof of about 1 1/2 feet should accompany a wall of 5 feet, and a roof of 4 feet should accompany a wall of 15 feet. For the roof area involved, this should bring about the condition that down-scattered neutrons in the working areas are but a small fraction of the neutrons coming through the side walls.

The production yields of hydrazine by various ionization methods are compared. The maximum value of M/N (number of molecules reacting per ion pairs) for electric discharge was 0.25 and for beta particles on liquid ammonia, M/N = 0.31. A 1-Mev reactor could produce 1.6 kg of hydrazine per hour if M/N = 0.04 as determined by alpha particles on liquid ammonia. About 300 ev of energy were needed to form a hydrazine molecule. (C.J.G.)

Technical report covering the metallurgy of thorium and on fabrication techniques. Report investigates the stability and corrosion resistance of thorium exposed to eutectic NaK, extrusion as a means of fabrication of thorium tubes or rods, and corrosion of large single metal crystals by liquid metals. [From Summary]